APPLICANT: Alcatel-Lucent FCC ID: AS5BBTRX-06 Section 2.
APPLICANT: Alcatel-Lucent FCC ID: AS5BBTRX-06 USERS MANUAL SECTION 2.1033(c) (3) A copy of the installation and operating instructions to be furnished the user. A draft copy of the instructions may be submitted if the actual document is not available. The actual document shall be furnished to FCC when it becomes available. RESPONSE: A copy of (1) 9442 Remote Radio Head (RRH) Hardware Installation Manual is attached.
Use pursuant to applicable agreements Title page Alcatel-Lucent FDD Remote Radio Head 700 MHz_15.
Use pursuant to applicable agreements Legal notice Legal notice Alcatel, Lucent, Alcatel-Lucent and the Alcatel-Lucent logo are trademarks of Alcatel-Lucent. All other trademarks are the property of their respective owners. The information presented is subject to change without notice. Alcatel-Lucent assumes no responsibility for inaccuracies contained herein. Copyright © 2012 Alcatel-Lucent. All rights reserved.
Contents About this document Purpose ............................................................................................................................................................................................ vii vii Safety information ...................................................................................................................................................................... vii vii Intended audience ...............................................................
Contents .................................................................................................................................................................................................................................... 4 Tools, materials, and checklist 4-1 Overview ...................................................................................................................................................................................... 4-1 Preparatory information 4-2 Overview .
Contents .................................................................................................................................................................................................................................... Route and connect optical fiber cables Fiber distribution unit (optional) ............................................................................................................................. 6-7 6-7 ...............................................................
Contents .................................................................................................................................................................................................................................... ....................................................................................................................................................................................................................................
About this document About this document Purpose This document provides hardware installation instructions for an Alcatel-Lucent FDD Remote Radio Head. Procedures are provided for handling, placement, grounding, powering, and cabling the RRH. Safety information For your safety, this document contains safety statements. Safety statements are given at points where risks of damage to personnel, equipment, and operation may exist.
About this document .................................................................................................................................................................................................................................... ....................................................................................................................................................................................................................................
1 Safety 1 Overview Purpose This chapter covers safety precautions. Contents Structure of safety statements 1-2 Safety 1-4 Safety - specific hazards 1-5 Product safety 1-10 ...................................................................................................................................................................................................................................
Safety Structure of safety statements .................................................................................................................................................................................................................................... Structure of safety statements Overview This topic describes the components of safety statements that appear in this document.
Safety Structure of safety statements .................................................................................................................................................................................................................................... Signal words The signal words identify the hazard severity levels as follows: Signal word Meaning DANGER Indicates an extremely hazardous situation which, if not avoided, will result in death or serious injury.
Safety Safety .................................................................................................................................................................................................................................... Safety General precautions for installation procedures WARNING Failure to observe these safety precautions may result in personal injury or damage to equipment. • Read and understand all instructions.
Safety Safety - specific hazards .................................................................................................................................................................................................................................... Safety - specific hazards DANGER Electric-shock hazard Working in severe weather can result in personal injury or death and damage to the equipment.
Safety Safety - specific hazards .................................................................................................................................................................................................................................... WARNING Electric-shock hazard The power supply lines to the network element are energized. Contact with parts carrying voltage can cause health problems, possibly including death, even hours after the event.
Safety Safety - specific hazards .................................................................................................................................................................................................................................... NOTICE ESD hazard Semiconductor devices can be damaged by electrostatic discharges.
Safety Safety - specific hazards .................................................................................................................................................................................................................................... NOTICE Tools Tools left in the working area can cause short circuits during operation which can lead to the destruction of units. Make sure after finishing your work that no tools, testing equipment, flashlights, etc.
Safety Safety - specific hazards .................................................................................................................................................................................................................................... CAUTION Lifting hazard Lifting this equipment by yourself can result in injury due to the size and weight of the equipment. Always use at least three people or a lifting device to move or position this equipment. .................................
Safety Product safety .................................................................................................................................................................................................................................... Product safety Equipment safety Safety information for this equipment can be found on various Caution, Warning, Danger, information labels or instructions affixed to or included with the RRH, its internal assemblies or included within this document.
2 Product overview 2 Overview Purpose This chapter provides an overview of the Alcatel-Lucent FDD Remote Radio Head. Contents Functional description 2-2 RRH description 2-3 RRH weights and dimensions 2-6 ...................................................................................................................................................................................................................................
Product overview Functional description .................................................................................................................................................................................................................................... Functional description General description The 2 x 40W 700MHz RRH specified here supports 3GPP E-UTRAN Band 12. The RRH includes an amplifier with two transmitters, four receivers, and filter all within one chassis.
Product overview RRH description .................................................................................................................................................................................................................................... RRH description RRH front-view (external) The following figure shows the front external view of the 700 MHz RRH. Solar Shield Wall mounting bracket DC Conduit box Mounting brackets (1of 2) ....................................................
Product overview RRH description .................................................................................................................................................................................................................................... Bottom view of the RRH Bottom view of the RRH 700 MHz: CPRI User alarm AISG (ALD) DC entry GigE Ground ........................................................................................................................................
Product overview RRH description ....................................................................................................................................................................................................................................
Product overview RRH weights and dimensions .................................................................................................................................................................................................................................... RRH weights and dimensions Weights and dimensions This topic covers the RRH weights and dimensions. Standard RRH weights and dimensions The following table provides weights and dimensions for the RRHs.
3 Site configurations 3 Overview Purpose This chapter provides configuration information for the RRH site. Contents RF configurations 3-2 Common Public Radio Interface Configuration 3-3 ...................................................................................................................................................................................................................................
Site configurations RF configurations .................................................................................................................................................................................................................................... RF configurations The RF capacity is measured in sectors, carriers, and RF signal power. The RF capacity determines what components appear in the RRH and what antenna connections are required.
Site configurations Common Public Radio Interface Configuration ....................................................................................................................................................................................................................................
Site configurations Common Public Radio Interface Configuration .................................................................................................................................................................................................................................... Daisy chain 1 x 3: Alpha Sector Beta Sector Gamma Sector RRH RRH RRH * CPRI BBU * CCM Fiber In CPRI CPRI * CPRI CPRI * * Customer supplied optional Fiber Splice/Management enclosure .................
4 4ools, materials, and T checklist Overview Purpose This chapter provides the tools and general installation requirements for the RRH. Contents Preparatory information 4-2 Tools required for installation 4-3 Torque requirements 4-6 Verify site preparation completed 4-8 Physical installation process overview 4-9 Installation procedure checklist 4-10 .................................................................................................................................................
Tools, materials, and checklist Preparatory information Overview .................................................................................................................................................................................................................................... Preparatory information Overview Purpose This section presents information and procedures that are relevant before the RRHs are mounted, and grounded.
Tools, materials, and checklist Preparatory information Tools required for installation .................................................................................................................................................................................................................................... Tools required for installation Overview This section provides a master list of all tools, materials, and parts required during the installation process.
Tools, materials, and checklist Preparatory information Tools required for installation ....................................................................................................................................................................................................................................
Tools, materials, and checklist Preparatory information Tools required for installation ....................................................................................................................................................................................................................................
Tools, materials, and checklist Preparatory information Torque requirements .................................................................................................................................................................................................................................... Torque requirements Overview This section provides mechanical torque requirements. Refer to the table below.
Tools, materials, and checklist Preparatory information Torque requirements .................................................................................................................................................................................................................................... Metric Screw Size SAE Screw Size Torque - in.-lb. [or ft.-lb.
Tools, materials, and checklist Preparatory information Verify site preparation completed .................................................................................................................................................................................................................................... Verify site preparation completed Overview This topic describes what must be done to verify that the site preparation is complete so that installation procedures can begin.
Tools, materials, and checklist Preparatory information Physical installation process overview .................................................................................................................................................................................................................................... Physical installation process overview Overview This topic delineates the steps involved in the installation of the RRH.
Tools, materials, and checklist Preparatory information Installation procedure checklist .................................................................................................................................................................................................................................... Installation procedure checklist Overview The following is a procedure checklist.
5 5ransport, mount, and T ground the RRH Overview Purpose This chapter provides general instructions for mounting and grounding the RRH. Contents Pre-installation instructions 5-2 Transport and mount the RRH 5-3 Mounting instructions 5-8 To mount hardware to wall 5-9 Pole mount installation overview 5-16 To mount hardware to pole with pole bands 5-18 To mount hardware to pole with pole brackets 5-22 To install RRH on pole weldment assemblies 5-25 To ground the RRH 5-27 .................
Transport, mount, and ground the RRH Pre-installation instructions Overview .................................................................................................................................................................................................................................... Pre-installation instructions Overview Purpose This section covers the: 1. Instructions for transporting and mounting the RRH. Contents Transport and mount the RRH 5-3 .................................
Transport, mount, and ground the RRH Pre-installation instructions Transport and mount the RRH ....................................................................................................................................................................................................................................
Transport, mount, and ground the RRH Pre-installation instructions Transport and mount the RRH .................................................................................................................................................................................................................................... WARNING RRH may fall If the RRH falls while being lifted, it may injure or kill a person.
Transport, mount, and ground the RRH Pre-installation instructions Transport and mount the RRH ....................................................................................................................................................................................................................................
Transport, mount, and ground the RRH Pre-installation instructions Transport and mount the RRH .................................................................................................................................................................................................................................... E........................................................................................................................................................................................
Transport, mount, and ground the RRH Pre-installation instructions Transport and mount the RRH .................................................................................................................................................................................................................................... Transport and place the RRH Proceed as follows to transport the RRH by derrick: ........................................................................................................
Transport, mount, and ground the RRH Mounting instructions Overview .................................................................................................................................................................................................................................... Mounting instructions Overview Purpose This sections contains instructions for the various methods of mounting the RRH.
Transport, mount, and ground the RRH Mounting instructions To mount hardware to wall .................................................................................................................................................................................................................................... To mount hardware to wall Overview This section describes the procedures to be followed when installing the mounting hardware for the RRH on a solid concrete wall (or to the Unistrut on a wall).
Transport, mount, and ground the RRH Mounting instructions To mount hardware to wall .................................................................................................................................................................................................................................... The following figure illustrates the mounting bracket that is required to mount the RRH on a wall. Wall bracket assembly ........................................................................
Transport, mount, and ground the RRH Mounting instructions To mount hardware to wall .................................................................................................................................................................................................................................... Wall mount - hole pattern The following graphic shows the wall mounting hole pattern for the RRH. The dimension shown are in millimeters. .......................................................
Transport, mount, and ground the RRH Mounting instructions To mount hardware to wall .................................................................................................................................................................................................................................... Wall mount clearances - Three RRHs The following graphic shows the hole patterns and minimum distances for wall mounting up to three RRHs in a row. 210 (8.3) 350 (13.8) 210 (8.3) 200 (7.
Transport, mount, and ground the RRH Mounting instructions To mount hardware to wall .................................................................................................................................................................................................................................... Indirect wall mounting (unistrut) The following graphic shows the unistrut. Before you begin Make sure you have read and understood the section “Transport and mount the RRH” (p. 5-3).
Transport, mount, and ground the RRH Mounting instructions To mount hardware to wall .................................................................................................................................................................................................................................... Result The RRH mounting bracket is attached to the wall or to the unistrut. Install RRH on wall CAUTION Personal Injury The bolts on the RRH can pinch and damage your fingers.
Transport, mount, and ground the RRH Mounting instructions To mount hardware to wall .................................................................................................................................................................................................................................... ...................................................................................................................................................................................................
Transport, mount, and ground the RRH Mounting instructions Pole mount installation overview .................................................................................................................................................................................................................................... Pole mount installation overview Overview This section describes the procedures to be followed when installing the RRH on a pole. There are two types of pole mounting installations: 1.
Transport, mount, and ground the RRH Mounting instructions Pole mount installation overview .................................................................................................................................................................................................................................... The following figure shows both, low profile and standard weldment: Standard Poleband Note: Pole band weldment assemblies must be created for both upper and lower bands at the same time.
Transport, mount, and ground the RRH Mounting instructions To mount hardware to pole with pole bands ....................................................................................................................................................................................................................................
Transport, mount, and ground the RRH Mounting instructions To mount hardware to pole with pole bands .................................................................................................................................................................................................................................... ...................................................................................................................................................................................
Transport, mount, and ground the RRH Mounting instructions To mount hardware to pole with pole bands .................................................................................................................................................................................................................................... ....................................................................................................................................................................................
Transport, mount, and ground the RRH Mounting instructions To mount hardware to pole with pole bands .................................................................................................................................................................................................................................... ....................................................................................................................................................................................
Transport, mount, and ground the RRH Mounting instructions To mount hardware to pole with pole brackets ....................................................................................................................................................................................................................................
Transport, mount, and ground the RRH Mounting instructions To mount hardware to pole with pole brackets .................................................................................................................................................................................................................................... • • • lock washers (qty. 12), flat washers (qty. 12), for M10 bolts M10 nuts (qty. 4) Wall Mounting Brackets (equipped with RRH).
Transport, mount, and ground the RRH Mounting instructions To mount hardware to pole with pole brackets .................................................................................................................................................................................................................................... .................................................................................................................................................................................
Transport, mount, and ground the RRH Mounting instructions To install RRH on pole weldment assemblies .................................................................................................................................................................................................................................... To install RRH on pole weldment assemblies Purpose This section describes the procedures to be followed when installing the RRH to pole weldment assemblies.
Transport, mount, and ground the RRH Mounting instructions To install RRH on pole weldment assemblies .................................................................................................................................................................................................................................... ...................................................................................................................................................................................
Transport, mount, and ground the RRH Mounting instructions To ground the RRH .................................................................................................................................................................................................................................... To ground the RRH Purpose This topic describes how to ground the RRH. To ground the RRH, a minimum of one connection to the grounding system is required.
Transport, mount, and ground the RRH Mounting instructions To ground the RRH .................................................................................................................................................................................................................................... ...................................................................................................................................................................................................
6 6 onnect interface and DC C cables Overview Purpose This chapter provides instructions for routing and connecting the following cables to the RRH: • • • • User alarm cables ALD cable Fiber optics cables. DC cable Contents Route and connect user alarm cables 6-2 Route and connect ALD cable (Optional) 6-5 Route and connect optical fiber cables 6-7 Fiber distribution unit (optional) 6-12 To route and connect DC power cables 6-14 Phoenix copper power distribution unit (optional) 6-16 ........
Connect interface and DC cables Route and connect user alarm cables .................................................................................................................................................................................................................................... Route and connect user alarm cables Purpose This topic provides all necessary information and procedural instructions to route and connect the user alarm cables to the Remote Radio Head (RRH).
Connect interface and DC cables Route and connect user alarm cables .................................................................................................................................................................................................................................... Cable Connectors type User alarms wire colors and punchdown positions Refer to table below for RRH wire color-coding and punch down information.
Connect interface and DC cables Route and connect user alarm cables .................................................................................................................................................................................................................................... ...................................................................................................................................................................................................
Connect interface and DC cables Route and connect ALD cable (Optional) .................................................................................................................................................................................................................................... Route and connect ALD cable (Optional) Purpose This topic provides all necessary information and procedural instructions to route and connect the ALD cable to the Remote Radio Head (RRH).
Connect interface and DC cables Route and connect ALD cable (Optional) .................................................................................................................................................................................................................................... ...................................................................................................................................................................................................
Connect interface and DC cables Route and connect optical fiber cables .................................................................................................................................................................................................................................... Route and connect optical fiber cables Purpose This topic provides all necessary information and procedural instructions to route and connect the optical fiber cables to the Remote Radio Head (RRH).
Connect interface and DC cables Route and connect optical fiber cables .................................................................................................................................................................................................................................... Cable Use Cable type Number of lines per cable Max.
Connect interface and DC cables Route and connect optical fiber cables .................................................................................................................................................................................................................................... ...................................................................................................................................................................................................
Connect interface and DC cables Route and connect optical fiber cables .................................................................................................................................................................................................................................... Plug (RRH) end Rear side (side with label) Locking Bracket Top side Protector Cover Receptacle (cable) end FIBER TRANSCEIVER ..............................................................................
Connect interface and DC cables Route and connect optical fiber cables .................................................................................................................................................................................................................................... ...................................................................................................................................................................................................
Connect interface and DC cables Fiber distribution unit (optional) .................................................................................................................................................................................................................................... Fiber distribution unit (optional) Overview This topic describes the optional fiber distribution unit and its connection to the RRHs.
Connect interface and DC cables Fiber distribution unit (optional) .................................................................................................................................................................................................................................... RRH RRH * RRH BBU D2U RRH * Fiber Distribution Unit RRH RRH * * Customer supplied optional Fiber Splice/Management enclosure .................................................................................
Connect interface and DC cables To route and connect DC power cables .................................................................................................................................................................................................................................... To route and connect DC power cables Purpose The following section covers the procedures for connecting DC and power alarm cables.
Connect interface and DC cables To route and connect DC power cables .................................................................................................................................................................................................................................... Before you begin Make sure power at DC source is turned off and secured against turn-on.
Connect interface and DC cables Phoenix copper power distribution unit (optional) .................................................................................................................................................................................................................................... Phoenix copper power distribution unit (optional) Overview This topic describes the optional Phoenix copper power distribution unit and its connection to the RRHs.
7 Finish the installation 7 Overview Purpose This chapter details the procedures for connecting RF cables to the RRH. In the standard configuration, there are two RF jumper cables. Final actions to finish the RRH installation are described. Contents To route and connect RF jumper cables 7-2 To finalize RRH installation 7-7 ....................................................................................................................................................................................
Finish the installation To route and connect RF jumper cables ....................................................................................................................................................................................................................................
Finish the installation To route and connect RF jumper cables .................................................................................................................................................................................................................................... RF connector location There are two RF connectors at the top of the RRH: RF Antenna connections Before you begin This procedure assumes the following requirements have been met.
Finish the installation To route and connect RF jumper cables .................................................................................................................................................................................................................................... Materials The following materials are expected to be present: Quantity Description 2 per sector RF jumper cable One 7/16, DIN male connector supplied installed at one end.
Finish the installation To route and connect RF jumper cables .................................................................................................................................................................................................................................... ...................................................................................................................................................................................................
Finish the installation To route and connect RF jumper cables .................................................................................................................................................................................................................................... ...................................................................................................................................................................................................
Finish the installation To finalize RRH installation .................................................................................................................................................................................................................................... To finalize RRH installation Initial start-up and system test procedures The actual procedures for initial start-up and test are not covered in this document.
Finish the installation To finalize RRH installation .................................................................................................................................................................................................................................... ...................................................................................................................................................................................................
Appendix A: Product conformance statements Overview Purpose This section presents the product conformance statements that apply to the FDD RRH. In regions such as North America and the European Union, the statements that are required are determined primarily by national or multi-national regulations. However, in some regions, contract terms determine which statements are required. The presence of the statement indicates that the product does comply with that statement wherever it is required to do so.
Product conformance statements Canada .................................................................................................................................................................................................................................... Canada Introduction The statements that follow are the product conformance statements that apply to the FDD RRH when deployed in Canada.
Product conformance statements Canada .................................................................................................................................................................................................................................... regulations regarding exposure to electromagnetic fields.
Product conformance statements Canada ....................................................................................................................................................................................................................................
Product conformance statements China .................................................................................................................................................................................................................................... China Introduction The statements that follow are the product conformance statements that apply to the FDD RRH when deployed in China.
Product conformance statements China ....................................................................................................................................................................................................................................
Product conformance statements European Union .................................................................................................................................................................................................................................... European Union Introduction The statements that follow are the product conformance statements that apply to the FDD RRH bearing the CE Marking and when deployed in the European Union.
Product conformance statements European Union .................................................................................................................................................................................................................................... Antenna exposure Antenna installations for the FDD RRH shall be performed in accordance with all applicable manufacturer's recommendations, and national laws and regulations.
Product conformance statements European Union .................................................................................................................................................................................................................................... Optical transmitters Alcatel-Lucent declares that FDD RRH complies with the CENELEC standards EN 60825-1 Edition 1994 and its amendment 1 (2002) and amendment 2 (2001) and EN 60825-2 Edition 2004.
Product conformance statements European Union ....................................................................................................................................................................................................................................
Product conformance statements United States .................................................................................................................................................................................................................................... United States Introduction The statements that follow are the product conformance statements that apply to the FDD RRH when deployed in the United States.
Product conformance statements United States .................................................................................................................................................................................................................................... • • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio/TV technician for help.
Product conformance statements United States .................................................................................................................................................................................................................................... FDA/IEC optical transmitter product compliance Alcatel-Lucent declares that FDD RRH complies with the Food and Drug Administration's Center for Devices and Radiological Health (FDA/CDRH) regulations 21 CFR 1040.10 and 1040.11.
Product conformance statements United States .................................................................................................................................................................................................................................... Antenna exposure Antenna installations for the FDD RRH shall be performed in accordance with all applicable manufacturer's recommendations, and national laws and regulations.
Product conformance statements United States .................................................................................................................................................................................................................................... Material content compliance The following notification applies to Alcatel-Lucent products distributed for sale, resale or use.
Product conformance statements United States .................................................................................................................................................................................................................................... ....................................................................................................................................................................................................................................
Appendix B: Acronyms Overview Purpose This appendix lists abbreviations used in this document. Contents Acronyms B-2 ...................................................................................................................................................................................................................................
Acronyms Acronyms ....................................................................................................................................................................................................................................
Acronyms Acronyms ....................................................................................................................................................................................................................................
Acronyms Acronyms .................................................................................................................................................................................................................................... ....................................................................................................................................................................................................................................
Index A ALD cable route and connect ~s, 6-5 Attach wall mounting bracket, 5-13 ............................................................. B Bands for pole mounting, 5-16 Bend pole bands, 5-20 Boom tip winch, 5-4 Bottom view, 2-4 Brackets for small diameter poles, 5-22 for wall mounting, 5-9 Configurations RF, 3-2 .............................................................
Index .................................................................................................................................................................................................................................... ............................................................. brackets for small poles, 5-22 L Lift RRH install pole bands, 5-20 .............................................................
Index .................................................................................................................................................................................................................................... ............................................................. V Verify site preparation, 4-8 .............................................................
Index .................................................................................................................................................................................................................................... ....................................................................................................................................................................................................................................
