APPLICANT: Alcatel-Lucent EXHIBIT 3 FCC ID: AS5BBTRX-05 EXHIBIT 3 Section 2.1033 (c)(3) INSTALLATION AND OPERATING INSTRUCTIONS A copy of the installation and operating instructions to be furnished to the user. A draft copy of the instructions may be submitted if the actual document is not available. The actual document shall be furnished to the FCC when it becomes available.
Use pursuant to applicable agreements Title page Alcatel-Lucent 9927 Distributed Base Station Outdoor Site Preparation Guidelines 401-703-516 Issue 1 | March 2012 Alcatel-Lucent – Proprietary Use pursuant to applicable agreements
Use pursuant to applicable agreements Legal notice Legal notice Alcatel, Lucent, Alcatel-Lucent and the Alcatel-Lucent logo are trademarks of Alcatel-Lucent. All other trademarks are the property of their respective owners. The information presented is subject to change without notice. Alcatel-Lucent assumes no responsibility for inaccuracies contained herein. Copyright © 2012 Alcatel-Lucent. All rights reserved.
About this document About this document Purpose This Information Product (IP) describes the basic site requirements that should be used to plan a Alcatel-Lucent 9927 Distributed Base Station outdoor site. This document includes specific tasks that should be completed at the job site before an installation can begin. Reason for reissue This document is Alcatel-Lucent 9927 Distributed Base Station Outdoor Site Preparation Guidelines, document number 401-703-516, Issue 1.
About this document .................................................................................................................................................................................................................................... Naming conventions In this IP, the Alcatel-Lucent 9927 Distributed Base Station Outdoor Cabinet is referred to as 9927 Distributed Base Station Outdoor Cabinet.
About this document .................................................................................................................................................................................................................................... ISO rated cross-sectional area (mm2) AWG/kcmil size NOTE: The dash, when it appears, counts as a size when considering connecting capacity (see 7.1.7.2 in the standard).
About this document ....................................................................................................................................................................................................................................
About this document .................................................................................................................................................................................................................................... How to comment To comment on this document, go to the Online Comment Form (http://infodoc.alcatellucent.com/comments/) or e-mail your comments to the Comments Hotline (comments@alcatel-lucent.com). ..............................................................
1 Safety 1 Overview Purpose This chapter covers safety precautions for the 9927 Distributed Base Station Outdoor Cabinet installation. Contents Structure of safety statements 1-2 Safety - specific hazards 1-5 Product safety 1-8 ...................................................................................................................................................................................................................................
Safety Structure of safety statements .................................................................................................................................................................................................................................... Structure of safety statements Overview This topic describes the components of safety statements that appear in this document.
Safety Structure of safety statements .................................................................................................................................................................................................................................... Signal words The signal words identify the hazard severity levels as follows: Signal word Meaning DANGER Indicates an extremely hazardous situation which, if not avoided, will result in death or serious injury.
Safety Structure of safety statements .................................................................................................................................................................................................................................... WARNING Personal Injury or Damage to Equipment Failure to observe these safety precautions may result in personal injury or damage to equipment. • • • • • • • • • • • • • • • Read and understand all instructions.
Safety Safety - specific hazards .................................................................................................................................................................................................................................... Safety - specific hazards DANGER Lightning Strikes! Lightning strikes are possible during stormy weather and could result in death or severe injury.
Safety Safety - specific hazards .................................................................................................................................................................................................................................... WARNING Beryllium Oxide Poisoning Hazard! The transmitter units include components which contain beryllium oxide (BeO).
Safety Safety - specific hazards .................................................................................................................................................................................................................................... NOTICE ESD hazard Semiconductor elements can be damaged by static discharges.
Safety Product safety .................................................................................................................................................................................................................................... Product safety Conformance statements See Appendix G, “Product conformance statements” for all conformance statements that apply to this product.
2 2roduct overview for 9927 P Distributed Base Station Outdoor cabinet Overview Purpose This chapter provides an overview of the 9927 Distributed Base Station Outdoor Cabinet. Contents Network view 2-2 Configurations 2-3 Product overview 2-4 Physical description 2-6 Components inside cabinet 2-13 Weights and dimensions of equipment 2-14 60ECv2 battery cabinet overview 2-19 .......................................................................................................................
Product overview for 9927 Distributed Base Station Outdoor cabinet Network view .................................................................................................................................................................................................................................... Network view Overview The 9927 Distributed Base Station is a Multi-Technology, Multi-Band BTS that supports multiple access technologies. The RRHs are multi-functional and support both CDMA and LTE.
Product overview for 9927 Distributed Base Station Outdoor cabinet Configurations .................................................................................................................................................................................................................................... Configurations Configurations In FID 15364.
Product overview for 9927 Distributed Base Station Outdoor cabinet Product overview ....................................................................................................................................................................................................................................
Product overview for 9927 Distributed Base Station Outdoor cabinet Product overview ....................................................................................................................................................................................................................................
Product overview for 9927 Distributed Base Station Outdoor cabinet Physical description .................................................................................................................................................................................................................................... Physical description Diagram The figure below shows the 9927 Distributed BTS outdoor cabinet with the front door closed. .....................................................................
Product overview for 9927 Distributed Base Station Outdoor cabinet Physical description .................................................................................................................................................................................................................................... ................................................................................................................................................................................................
Product overview for 9927 Distributed Base Station Outdoor cabinet Physical description .................................................................................................................................................................................................................................... The figure below illustrates the position of each component inside the 9927 Distributed BTS cabinet. ..........................................................................................
Product overview for 9927 Distributed Base Station Outdoor cabinet Physical description .................................................................................................................................................................................................................................... The following figure is a left-side view of the 9927 Distributed Base Station Outdoor Cabinet. The dimensions are shown in mm and inches. .....................................................
Product overview for 9927 Distributed Base Station Outdoor cabinet Physical description .................................................................................................................................................................................................................................... The following figure is a front view of the 9927 Distributed Base Station Outdoor Cabinet. The dimensions are shown in mm and inches. .........................................................
Product overview for 9927 Distributed Base Station Outdoor cabinet Physical description .................................................................................................................................................................................................................................... The following figure is a right-side view of the 9927 Distributed Base Station Outdoor Cabinet. The dimensions are shown in mm and inches.
Product overview for 9927 Distributed Base Station Outdoor cabinet Physical description ....................................................................................................................................................................................................................................
Product overview for 9927 Distributed Base Station Outdoor cabinet Components inside cabinet .................................................................................................................................................................................................................................... Components inside cabinet Purpose This section lists the components that can be populated in the 9927 Distributed Base Station Outdoor Cabinet.
Product overview for 9927 Distributed Base Station Outdoor cabinet Weights and dimensions of equipment .................................................................................................................................................................................................................................... Weights and dimensions of equipment Introduction This section provides physical specifications for one configuration of the 9927 Distributed Base Station Outdoor Cabinet.
Product overview for 9927 Distributed Base Station Outdoor cabinet Weights and dimensions of equipment .................................................................................................................................................................................................................................... Component weights The following table provides approximate weights for batteries and other miscellaneous hardware.
Product overview for 9927 Distributed Base Station Outdoor cabinet Weights and dimensions of equipment .................................................................................................................................................................................................................................... 9927 Distributed Base Station Outdoor Cabinet dimensions The following figure is a left-side view of the 9927 Distributed Base Station Outdoor Cabinet.
Product overview for 9927 Distributed Base Station Outdoor cabinet Weights and dimensions of equipment .................................................................................................................................................................................................................................... The following figure is a front view of the 9927 Distributed Base Station Outdoor Cabinet. The dimensions are shown in mm and inches. ..........................................
Product overview for 9927 Distributed Base Station Outdoor cabinet Weights and dimensions of equipment .................................................................................................................................................................................................................................... The following figure is a right-side view of the 9927 Distributed Base Station Outdoor Cabinet. The dimensions are shown in mm and inches. .....................................
Product overview for 9927 Distributed Base Station Outdoor cabinet 60ECv2 battery cabinet overview .................................................................................................................................................................................................................................... 60ECv2 battery cabinet overview 60ECv2 description This topic provides a description of the 60ECv2 battery cabinet.
Product overview for 9927 Distributed Base Station Outdoor cabinet 60ECv2 battery cabinet overview .................................................................................................................................................................................................................................... .....................................................................................................................................................................................
3 Product overview for RRHs 3 Overview Purpose This chapter provides an overview of the Alcatel-Lucent Remote Radio Head, with optional power and battery back up. Contents Typical RRH/antenna array 3-2 External views of RRHs 3-3 Detailed physical description 3-6 Functional description of RRHs 3-18 Antenna Remote Electronic Tilt (RET) — FID 13019.36 3-19 RRH mounting configurations 3-20 RRHs and related equipment 3-23 ..........................................................................
Product overview for RRHs Typical RRH/antenna array .................................................................................................................................................................................................................................... Typical RRH/antenna array Typical RRH/antenna arrays on tower The figure below shows a typical RRH/antenna array on a tower. .....................................................................................................
Product overview for RRHs External views of RRHs .................................................................................................................................................................................................................................... External views of RRHs Orthogonal view of 1900 MHz, PCS, 4x40W (25 MHz) RRH The following figure is an orthogonal view of the 1900 MHz, PCS, 4x40W (25 MHz) RRH. Dimensions are shown in mm. 330 (13.0) 580 (22.8) 440 (17.3) .....
Product overview for RRHs External views of RRHs .................................................................................................................................................................................................................................... Orthogonal view of 1900 MHz, PCS, 4x45W (65 MHz) RRH The following figure is an orthogonal view of the 1900 MHz, PCS, 4x45W (65 MHz) RRH. Dimensions are shown in mm.
Product overview for RRHs External views of RRHs .................................................................................................................................................................................................................................... Orthogonal view of 800 MHz, 2x50W RRH (OEM2) The following figure is an orthogonal view of the OEM2, 800 MHz, 2x50W RRH. Dimensions are shown in mm. 330 400 800 Mhz (23 kg/50.6 lbs) 255 .......................................
Product overview for RRHs Detailed physical description .................................................................................................................................................................................................................................... Detailed physical description Identify RRHs according to front, top and bottom views Use the table below to identify each RRH using the front, top and bottom views.
Product overview for RRHs Detailed physical description .................................................................................................................................................................................................................................... Front view of 1900 MHz, PCS, 4x40W (25 MHz) RRH The following figure is a front view of the 1900 MHz PCS, 4x40W (25 MHz) RRH. ................................................................................................
Product overview for RRHs Detailed physical description .................................................................................................................................................................................................................................... Top view of 1900 MHz, PCS, 4x40W (25 MHz) RRH The following figure is a top view of the 1900 MHz PCS, 4x40W (25 MHz) RRH. ....................................................................................................
Product overview for RRHs Detailed physical description .................................................................................................................................................................................................................................... Bottom view of 1900 MHz, PCS, 4x40W (25 MHz) RRH The following figure shows the connectors on the bottom of the 1900 MHz, PCS, 4x40W (25 MHz) RRH. Tx2 MON AUX Rx2 AUX Rx1 CPRI PRI CPRI SEC ASIG ALM Tx2 MON ............
Product overview for RRHs Detailed physical description .................................................................................................................................................................................................................................... Front view of 1900 MHz, PCS, 4x45W (65 MHz) RRH The following figure is a front view of the 1900 MHz, PCS, 4x45W (65 MHz) RRH. ...............................................................................................
Product overview for RRHs Detailed physical description .................................................................................................................................................................................................................................... Top view of 1900 MHz, PCS, 4x45W (65 MHz) RRH The following figure is a top view of the 1900 MHz, PCS, 4x45W (65 MHz) RRH. ...................................................................................................
Product overview for RRHs Detailed physical description .................................................................................................................................................................................................................................... Bottom view of 1900 MHz, PCS, 4x45W (65 MHz) RRH The following figure shows the connectors on the bottom of the 1900 MHz, PCS, 4x45W (65 MHz) RRH. ...........................................................................
Product overview for RRHs Detailed physical description .................................................................................................................................................................................................................................... Front view of OEM1, 800 MHz, 2x50W RRH The following figure is a front view of the OEM1, 800 MHz, 2x50W RRH. Top view of OEM1, 800 MHz, 2x50W RRH The following figure is a top view of the OEM1, 800 MHz, 2x50W RRH. ......
Product overview for RRHs Detailed physical description .................................................................................................................................................................................................................................... Bottom view of OEM1, 800 MHz, 2x50W RRH The following figure is a bottom view of the OEM1, 800 MHz, 2x50W RRH. Front view of OEM2, 800 MHz, 2x50W RRH The following figure is a front view of the OEM2, 800 MHz, 2x50W RRH.
Product overview for RRHs Detailed physical description .................................................................................................................................................................................................................................... Top view of OEM2, 800 MHz, 2x50W RRH The following figure is a top view of the OEM2, 800 MHz, 2x50W RRH.
Product overview for RRHs Detailed physical description .................................................................................................................................................................................................................................... Connectors on 1900 MHz RRH The following table lists the connectors on the 1900 MHz RRH and the function of each connector.
Product overview for RRHs Detailed physical description ....................................................................................................................................................................................................................................
Product overview for RRHs Functional description of RRHs .................................................................................................................................................................................................................................... Functional description of RRHs General description The three RRHs pictured below are used with 800 MHz CDMA, PCS CDMA, and LTE technologies.
Product overview for RRHs Antenna Remote Electronic Tilt (RET) — FID 13019.36 .................................................................................................................................................................................................................................... Antenna Remote Electronic Tilt (RET) — FID 13019.36 General description FID-13019.36 introduces a Remote Radio Head (RRH) with an associated RET/ALD controller that operates the RET.
Product overview for RRHs RRH mounting configurations .................................................................................................................................................................................................................................... RRH mounting configurations RRH mounting configurations The RRHs can be mounted on a: • • Pole Wall • Floor Stand. Pole mounted RRHs The following figure shows the 800 MHz/1900 MHz RRH configuration mounted on a pole.
Product overview for RRHs RRH mounting configurations .................................................................................................................................................................................................................................... Floor Stand mounted RRHs [800 MHz and 4x40W (25 MHz) PCS] he following figure shows the floor stand that is used with 800 MHz and 4x40W (25 MHz) PCS RRHs. The wall mounting bracket is shown attached. ........................
Product overview for RRHs RRH mounting configurations .................................................................................................................................................................................................................................... ..................................................................................................................................................................................................................................
Product overview for RRHs RRHs and related equipment .................................................................................................................................................................................................................................... RRHs and related equipment Weights and dimensions This topic covers the weights and dimensions for RRHs and related equipment.
Product overview for RRHs RRHs and related equipment .................................................................................................................................................................................................................................... Item Weight kg (lbs) Floor Stand (RRH) 23 (50) Grounding points on RRHs The grounding points on the 1900 MHz and 800 MHz RRHs are located at the bottom, on the left and right sides. .......................................
Product overview for RRHs RRHs and related equipment .................................................................................................................................................................................................................................... The following figure shows how grounding wire is routed to the RRHs.
Product overview for RRHs RRHs and related equipment .................................................................................................................................................................................................................................... The left–side grounding point on the OEM2 RRH is located at the left bottom, as shown in the figure below. The right–side grounding point on the OEM2 RRH is located at the right bottom, as shown in the figure below.
Product overview for RRHs RRHs and related equipment .................................................................................................................................................................................................................................... The left-side grounding point on the 1900 MHz, 4x40W RRH is located at the left bottom, as shown in the figure below.
Product overview for RRHs RRHs and related equipment .................................................................................................................................................................................................................................... The grounding points on the 1900 MHz, 4x45W RRH are located on the bottom, as shown in the figure below. .........................................................................................................................
4 S4ite configurations for 9927 Distributed BTS Outdoor Cabinet Overview Purpose This chapter describes configurations and site layouts for the 9228 Distributed Base Station site. Contents Line-up configuration 4-2 Line-up configuration 4-3 Site layout 4-4 9927 Distributed Base Station Outdoor Cabinet site layout 4-5 ......................................................................................................................................................................................
Site configurations for 9927 Distributed BTS Outdoor Overview Cabinet Line-up configuration .................................................................................................................................................................................................................................... Line-up configuration Overview Purpose This section discusses the line-up configuration for the 9927 Distributed Base Station Outdoor Cabinet. Contents Line-up configuration 4-3 .........
Site configurations for 9927 Distributed BTS Outdoor Line-up configuration Cabinet Line-up configuration .................................................................................................................................................................................................................................... Line-up configuration Purpose This section describes the only line-up that is available for the 9927 Distributed Base Station Outdoor Cabinet.
Site configurations for 9927 Distributed BTS Outdoor Overview Cabinet Site layout .................................................................................................................................................................................................................................... Site layout Overview Purpose This section shows the site layout for the 9927 Distributed Base Station Outdoor Cabinet. Contents 9927 Distributed Base Station Outdoor Cabinet site layout 4-5 .......
Site configurations for 9927 Distributed BTS Outdoor 9927 Distributed Base Station Outdoor Cabinet site layout Cabinet Site layout ....................................................................................................................................................................................................................................
Site configurations for 9927 Distributed BTS Outdoor 9927 Distributed Base Station Outdoor Cabinet site layout Cabinet Site layout ....................................................................................................................................................................................................................................
5 5 asic site preparation B requirements and footprints for 9927 Distributed Base Station outdoor cabinet ...................................................................................................................................................................................................................................
Basic site preparation requirements and footprints for 9927 Distributed Base Station outdoor cabinet Overview ....................................................................................................................................................................................................................................
Basic site preparation requirements and footprints for 9927 Overview Distributed Base Station outdoor cabinet Site requirements for 9927 Distributed Base Station ....................................................................................................................................................................................................................................
Basic site preparation requirements and footprints for 9927 Environmental requirements Distributed Base Station outdoor cabinet Site requirements for 9927 Distributed Base Station ....................................................................................................................................................................................................................................
Basic site preparation requirements and footprints for 9927 Environmental requirements Distributed Base Station outdoor cabinet Site requirements for 9927 Distributed Base Station ....................................................................................................................................................................................................................................
Basic site preparation requirements and footprints for 9927 Site requirements Distributed Base Station outdoor cabinet Site requirements for 9927 Distributed Base Station ....................................................................................................................................................................................................................................
Basic site preparation requirements and footprints for 9927 Site requirements Distributed Base Station outdoor cabinet Site requirements for 9927 Distributed Base Station ....................................................................................................................................................................................................................................
Basic site preparation requirements and footprints for 9927 Site requirements Distributed Base Station outdoor cabinet Site requirements for 9927 Distributed Base Station ....................................................................................................................................................................................................................................
Basic site preparation requirements and footprints for 9927 Mounting options Distributed Base Station outdoor cabinet Site requirements for 9927 Distributed Base Station ....................................................................................................................................................................................................................................
Basic site preparation requirements and footprints for 9927 Mounting options Distributed Base Station outdoor cabinet Site requirements for 9927 Distributed Base Station ....................................................................................................................................................................................................................................
Basic site preparation requirements and footprints for 9927 Support structure, ice bridge and service access clearances Distributed Base Station outdoor cabinet Site requirements for 9927 Distributed Base Station ....................................................................................................................................................................................................................................
Basic site preparation requirements and footprints for 9927 Anchoring requirements Distributed Base Station outdoor cabinet Site requirements for 9927 Distributed Base Station ....................................................................................................................................................................................................................................
Basic site preparation requirements and footprints for 9927 Anchoring footprints Distributed Base Station outdoor cabinet Site requirements for 9927 Distributed Base Station ....................................................................................................................................................................................................................................
Basic site preparation requirements and footprints for 9927 Anchoring footprints Distributed Base Station outdoor cabinet Site requirements for 9927 Distributed Base Station .................................................................................................................................................................................................................................... Outdoor cabinet ............................................................................................
Basic site preparation requirements and footprints for 9927 Overview Distributed Base Station outdoor cabinet Site preparation procedures ....................................................................................................................................................................................................................................
Basic site preparation requirements and footprints for 9927 Drill anchor holes Distributed Base Station outdoor cabinet Site preparation procedures ....................................................................................................................................................................................................................................
Basic site preparation requirements and footprints for 9927 Drill anchor holes Distributed Base Station outdoor cabinet Site preparation procedures .................................................................................................................................................................................................................................... .......................................................................................................................................
Basic site preparation requirements and footprints for 9927 Distributed Base Station outdoor cabinet Drill anchor holes .................................................................................................................................................................................................................................... ................................................................................................................................................................
6 6 asic site preparation B requirements and footprints for RRHs Overview Purpose This chapter discusses how to prepare the site for installation of RRHs. Contents Site requirements for RRHs 6-2 Storing RRHs in non-powered state 6-3 Environmental requirements 6-4 Site requirements for RRHs 6-5 RRH cabinet clearances 6-6 Site requirements for pole mount installations 6-8 Site requirements for wall mount installations 6-11 Site requirements for floor stand installations 6-16 ...............
Basic site preparation requirements and footprints for Overview RRHs Site requirements for RRHs ....................................................................................................................................................................................................................................
Basic site preparation requirements and footprints for Storing RRHs in non-powered state RRHs Site requirements for RRHs ....................................................................................................................................................................................................................................
Basic site preparation requirements and footprints for Environmental requirements RRHs Site requirements for RRHs .................................................................................................................................................................................................................................... Environmental requirements Environmental requirements for outdoor installations In an outdoor installation temperature, humidity, and ventilation cannot be controlled.
Basic site preparation requirements and footprints for Site requirements for RRHs RRHs Site requirements for RRHs ....................................................................................................................................................................................................................................
Basic site preparation requirements and footprints for RRH cabinet clearances RRHs Site requirements for RRHs .................................................................................................................................................................................................................................... RRH cabinet clearances Minimum clearances table The following table provides the minimum wall mount clearances recommended around RRHs.
Basic site preparation requirements and footprints for RRH cabinet clearances RRHs Site requirements for RRHs .................................................................................................................................................................................................................................... Fiber optic cable shall be provided by Alcatel-Lucent to connect the 9927 Distributed BTS outdoor cabinet to the DC Distribution/Fiber Management Box. ....................
Basic site preparation requirements and footprints for Site requirements for pole mount installations RRHs Site requirements for RRHs ....................................................................................................................................................................................................................................
Basic site preparation requirements and footprints for Site requirements for pole mount installations RRHs Site requirements for RRHs .................................................................................................................................................................................................................................... Pole mounting example The 800 MHz RRH and 1900 MHz, PCS, 4x40W RRH shall be mounted on a pole, as shown in the figure below. 1900 MHz,4x40W RRH .
Basic site preparation requirements and footprints for Site requirements for pole mount installations RRHs Site requirements for RRHs .................................................................................................................................................................................................................................... The 800 MHz RRH and 1900 MHz, PCS, 4x45W RRH shall be mounted on a pole, as shown in the figure below. ............................................
Basic site preparation requirements and footprints for Site requirements for wall mount installations RRHs Site requirements for RRHs .................................................................................................................................................................................................................................... Site requirements for wall mount installations Overview This topic describes site requirements for installing RRHs on a wall.
Basic site preparation requirements and footprints for Site requirements for wall mount installations RRHs Site requirements for RRHs ....................................................................................................................................................................................................................................
Basic site preparation requirements and footprints for Site requirements for wall mount installations RRHs Site requirements for RRHs ....................................................................................................................................................................................................................................
Basic site preparation requirements and footprints for Site requirements for wall mount installations RRHs Site requirements for RRHs .................................................................................................................................................................................................................................... Install the Unistruts as follows: ..................................................................................................................
Basic site preparation requirements and footprints for Site requirements for wall mount installations RRHs Site requirements for RRHs .................................................................................................................................................................................................................................... RRH wall mount bracket assembly The following figure shows the completed installation of a wall mount bracket on a Unistrut assembly. ............
Basic site preparation requirements and footprints for Site requirements for floor stand installations RRHs Site requirements for RRHs ....................................................................................................................................................................................................................................
Basic site preparation requirements and footprints for Site requirements for floor stand installations RRHs Site requirements for RRHs .................................................................................................................................................................................................................................... Floor stand The floor stand in the figure below is for installing an 800 MHz, 2x50W or 1900 MHz, 4x40W (25 MHz) RRH on a floor. .................
Basic site preparation requirements and footprints for Site requirements for floor stand installations RRHs Site requirements for RRHs .................................................................................................................................................................................................................................... The figure below shows the anchor hole, drill pattern template for the floor stand.
Basic site preparation requirements and footprints for Site requirements for floor stand installations RRHs Site requirements for RRHs .................................................................................................................................................................................................................................... ....................................................................................................................................................
Basic site preparation requirements and footprints for RRHs Site requirements for floor stand installations .................................................................................................................................................................................................................................... ............................................................................................................................................................................
7 7 asic site preparation B requirements and footprints for DC Distribution/Fiber Management Box ...................................................................................................................................................................................................................................
Basic site preparation requirements and footprints for DC Distribution/Fiber Management Box Overview .................................................................................................................................................................................................................................... Overview Purpose This chapter describes basic site preparation requirements for the DC Distribution/Fiber Management Box, which interfaces the RRHs with the baseband cabinet.
Basic site preparation requirements and footprints for DC Distribution/Fiber Management Box Cabinet clearances for DC Distribution/Fiber Management Box ....................................................................................................................................................................................................................................
Basic site preparation requirements and footprints for DC Distribution/Fiber Management Box Site requirements for wall mount installation of DC Distribution/Fiber Management Box ....................................................................................................................................................................................................................................
Basic site preparation requirements and footprints for DC Distribution/Fiber Management Box Site requirements for wall mount installation of DC Distribution/Fiber Management Box ....................................................................................................................................................................................................................................
Basic site preparation requirements and footprints for DC Distribution/Fiber Management Box Site requirements for wall mount installation of DC Distribution/Fiber Management Box .................................................................................................................................................................................................................................... .......................................................................................................
Basic site preparation requirements and footprints for DC Distribution/Fiber Management Box Site requirements for wall mount installation of DC Distribution/Fiber Management Box .................................................................................................................................................................................................................................... .......................................................................................................
Basic site preparation requirements and footprints for DC Distribution/Fiber Management Box Site requirements for wall mount installation of DC Distribution/Fiber Management Box ....................................................................................................................................................................................................................................
8 8lectrical power E requirements for 9927 Distributed Base Station Outdoor Cabinet Overview Purpose This chapter provides AC electrical power requirements for the 9927 Distributed Base Station cabinets when installed at a new site.
Electrical power requirements for 9927 Distributed Base Overview Station Outdoor Cabinet Power overview .................................................................................................................................................................................................................................... Power overview Overview Purpose This section provides an overview of the power requirements for 9927 Distributed Base Station Outdoor Cabinet.
Electrical power requirements for 9927 Distributed Base Power systems Station Outdoor Cabinet Power overview .................................................................................................................................................................................................................................... Power systems Integrated power The 9927 Distributed Base Station Outdoor Cabinet that is equipped with integrated power.
Electrical power requirements for 9927 Distributed Base Backup power systems Station Outdoor Cabinet Power overview ....................................................................................................................................................................................................................................
Electrical power requirements for 9927 Distributed Base Electrical service requirements for 9927 Distributed Base Station Outdoor Cabinet Station outdoor cabinet Power overview ....................................................................................................................................................................................................................................
Electrical power requirements for 9927 Distributed Base Overview Station Outdoor Cabinet Power requirements for 9927 Distributed Base Station ....................................................................................................................................................................................................................................
Electrical power requirements for 9927 Distributed Base General requirements Station Outdoor Cabinet Power requirements for 9927 Distributed Base Station ....................................................................................................................................................................................................................................
Electrical power requirements for 9927 Distributed Base AC convenience outlet, AC PDA, and AC line surge Station Outdoor Cabinet protection Power requirements for 9927 Distributed Base Station ....................................................................................................................................................................................................................................
Electrical power requirements for 9927 Distributed Base AC convenience outlet, AC PDA, and AC line surge Station Outdoor Cabinet protection Power requirements for 9927 Distributed Base Station ....................................................................................................................................................................................................................................
Electrical power requirements for 9927 Distributed Base AC feeder cable and service panel requirements Station Outdoor Cabinet Power requirements for 9927 Distributed Base Station ....................................................................................................................................................................................................................................
Electrical power requirements for 9927 Distributed Base Power requirements for new site installation of 9927 Station Outdoor Cabinet Distributed Base Station Outdoor Cabinet Power requirements for 9927 Distributed Base Station ....................................................................................................................................................................................................................................
Electrical power requirements for 9927 Distributed Base Battery Reserve Times for batteries inside 60ECv2 battery Station Outdoor Cabinet cabinet Power requirements for 9927 Distributed Base Station ....................................................................................................................................................................................................................................
9 9lectrical power E requirements for RRHs Overview Purpose This chapter provides guidelines for running electrical power to the RRHs, when the RRHs are up to 15 m from the 9927 Distributed Base Station Outdoor Cabinet. Contents Power requirements (general) 9-2 Power consumption 9-3 DC power requirements for RRHs 9-4 ........................................................................................................................................................................................
Electrical power requirements for RRHs Power requirements (general) .................................................................................................................................................................................................................................... Power requirements (general) General requirements . This section provides the DC power requirements for the RRHs.
Electrical power requirements for RRHs Power consumption .................................................................................................................................................................................................................................... Power consumption General This section provides input power requirements for RRHs.
Electrical power requirements for RRHs DC power requirements for RRHs ....................................................................................................................................................................................................................................
10 10 preparation Site requirements for 9927 Distributed Base Station Outdoor cabinet GPS antenna and microwave antenna cable ...................................................................................................................................................................................................................................
Site preparation requirements for 9927 Distributed Base Overview Station Outdoor cabinet GPS antenna and microwave antenna cable ....................................................................................................................................................................................................................................
Site preparation requirements for 9927 Distributed Base General requirements Station Outdoor cabinet GPS antenna and microwave antenna cable .................................................................................................................................................................................................................................... General requirements Introduction This section describes site preparation guidelines for the GPS antenna.
Site preparation requirements for 9927 Distributed Base Site preparation for GPS antenna Station Outdoor cabinet GPS antenna and microwave antenna cable .................................................................................................................................................................................................................................... Site preparation for GPS antenna Introduction This section describes how to perform site preparation for the GPS antenna.
Site preparation requirements for 9927 Distributed Base Site preparation for GPS antenna Station Outdoor cabinet GPS antenna and microwave antenna cable .................................................................................................................................................................................................................................... Surge protection for GPS antenna jumper cables Surge protectors are required for the GPS antenna.
Site preparation requirements for 9927 Distributed Base Site preparation for microwave antenna cables Station Outdoor cabinet GPS antenna and microwave antenna cable ....................................................................................................................................................................................................................................
Site preparation requirements for 9927 Distributed Base Site preparation for microwave antenna cables Station Outdoor cabinet GPS antenna and microwave antenna cable ....................................................................................................................................................................................................................................
Site preparation requirements for 9927 Distributed Base Site preparation for microwave antenna cables Station Outdoor cabinet GPS antenna and microwave antenna cable .................................................................................................................................................................................................................................... ....................................................................................................................
11 11 antenna cable RF requirements for RRHs Overview Purpose This chapter provides an overview of RF antenna interface requirements for RRHs. Contents Antenna requirements 11-2 Surge protection requirements 11-3 General antenna cable requirements 11-4 ...................................................................................................................................................................................................................................
RF antenna cable requirements for RRHs Antenna requirements .................................................................................................................................................................................................................................... Antenna requirements General requirements The customer can order 1/2 inch coaxial jumper cable to interface the RRH with the antenna. It is the customer's responseability to arrange for the construction of the RF path.
RF antenna cable requirements for RRHs Surge protection requirements .................................................................................................................................................................................................................................... Surge protection requirements General requirements The RF Filter inside the RRH is already equipped with a surge protector.
RF antenna cable requirements for RRHs General antenna cable requirements .................................................................................................................................................................................................................................... General antenna cable requirements General requirements All cable runs must be supported appropriately, in accordance with connector and cable manufacturer's instructions.
RF antenna cable requirements for RRHs General antenna cable requirements .................................................................................................................................................................................................................................... The following figure shows a typical method for connecting an antenna cable.
RF antenna cable requirements for RRHs General antenna cable requirements .................................................................................................................................................................................................................................... ..............................................................................................................................................................................................................
12 12 Grounding and lightning protection requirements for 9927 Distributed Base Station Outdoor Cabinet Overview Purpose This chapter provides information on grounding and lightning protection requirements for a 9927 Distributed Base Station Outdoor Cabinet site. Contents Grounding requirements 12-2 Surge protection requirements 12-3 Grounding electrode system 12-6 .......................................................................................................................................
Grounding and lightning protection requirements for 9927 Distributed Base Station Outdoor Cabinet Grounding requirements ....................................................................................................................................................................................................................................
Grounding and lightning protection requirements for 9927 Distributed Base Station Outdoor Cabinet Surge protection requirements ....................................................................................................................................................................................................................................
Grounding and lightning protection requirements for 9927 Distributed Base Station Outdoor Cabinet Surge protection requirements .................................................................................................................................................................................................................................... Diagram of a typical surge protector installation The following diagram shows a typical surge protector installation.
Grounding and lightning protection requirements for 9927 Distributed Base Station Outdoor Cabinet Surge protection requirements ....................................................................................................................................................................................................................................
Grounding and lightning protection requirements for 9927 Distributed Base Station Outdoor Cabinet Grounding electrode system ....................................................................................................................................................................................................................................
Grounding and lightning protection requirements for 9927 Distributed Base Station Outdoor Cabinet Grounding electrode system ....................................................................................................................................................................................................................................
Grounding and lightning protection requirements for 9927 Distributed Base Station Outdoor Cabinet Grounding electrode system ....................................................................................................................................................................................................................................
13 13 Grounding and lightning protection requirements for RRHs Overview Purpose This chapter discusses grounding and lightning protection requirements for the RRHs. Contents Grounding and surge protection requirements 13-2 Grounding examples - Remote Radio Head 13-3 ...................................................................................................................................................................................................................................
Grounding and lightning protection requirements for RRHs Grounding and surge protection requirements .................................................................................................................................................................................................................................... Grounding and surge protection requirements Surge protection in RRHs The RRHs are equipped with internal surge protectors. No external surge protectors are required. ...........
Grounding and lightning protection requirements for RRHs Grounding examples - Remote Radio Head .................................................................................................................................................................................................................................... Grounding examples - Remote Radio Head Wall mount grounding Each RRH cabinet must be grounded. The RRH cabinet must be grounded as follows: 1. At the top of cabinet 2.
Grounding and lightning protection requirements for RRHs Grounding examples - Remote Radio Head .................................................................................................................................................................................................................................... The figure shows how 6 AWG ground cable can be routed from a wall mounted RRH to the system ground.
Grounding and lightning protection requirements for RRHs Grounding examples - Remote Radio Head .................................................................................................................................................................................................................................... Pole mount grounding Each RRH cabinet must be grounded. Each RRH cabinet must be grounded as follows: • • At the top of the cabinet At the left or right side of the cabinet.
Grounding and lightning protection requirements for RRHs Grounding examples - Remote Radio Head .................................................................................................................................................................................................................................... ........................................................................................................................................................................................
14 14 preparation -- T1/E1 Site and User Alarm facilities for 9927 Distributed Base Station Outdoor Cabinet Overview Purpose This chapter describes the site preparation requirements related to T1/E1 and User Alarm facilities for 9927 Distributed Base Station Outdoor Cabinet. Contents Balun Block requirements 14-2 Site preparation for T1/E1 and User Alarm cables 14-3 Specify assignments for T1/E1 lines 14-6 Site preparation for User Alarm cables 14-9 ...............................................
Site preparation -- T1/E1 and User Alarm facilities for 9927 Distributed Base Station Outdoor Cabinet Balun Block requirements .................................................................................................................................................................................................................................... Balun Block requirements Overview The customer is responsible to convert the 75 ohm unbalanced coaxial cable to 120 ohm balanced twisted pairs.
Site preparation -- T1/E1 and User Alarm facilities for 9927 Distributed Base Station Outdoor Cabinet Site preparation for T1/E1 and User Alarm cables ....................................................................................................................................................................................................................................
Site preparation -- T1/E1 and User Alarm facilities for 9927 Distributed Base Station Outdoor Cabinet Site preparation for T1/E1 and User Alarm cables ....................................................................................................................................................................................................................................
Site preparation -- T1/E1 and User Alarm facilities for 9927 Distributed Base Station Outdoor Cabinet Site preparation for T1/E1 and User Alarm cables ....................................................................................................................................................................................................................................
Site preparation -- T1/E1 and User Alarm facilities for 9927 Distributed Base Station Outdoor Cabinet Specify assignments for T1/E1 lines ....................................................................................................................................................................................................................................
Site preparation -- T1/E1 and User Alarm facilities for 9927 Distributed Base Station Outdoor Cabinet Specify assignments for T1/E1 lines ....................................................................................................................................................................................................................................
Site preparation -- T1/E1 and User Alarm facilities for 9927 Distributed Base Station Outdoor Cabinet Specify assignments for T1/E1 lines ....................................................................................................................................................................................................................................
Site preparation -- T1/E1 and User Alarm facilities for 9927 Distributed Base Station Outdoor Cabinet Site preparation for User Alarm cables ....................................................................................................................................................................................................................................
Site preparation -- T1/E1 and User Alarm facilities for 9927 Distributed Base Station Outdoor Cabinet Site preparation for User Alarm cables ....................................................................................................................................................................................................................................
Site preparation -- T1/E1 and User Alarm facilities for 9927 Distributed Base Station Outdoor Cabinet Site preparation for User Alarm cables .................................................................................................................................................................................................................................... Facilities cable 35 37 pin D-Sub BlueYellow Wire Color USERALM15 (-) Cable 1 function Cable 2 function USERALM31 (-) ................
Site preparation -- T1/E1 and User Alarm facilities for 9927 Distributed Base Station Outdoor Cabinet Site preparation for User Alarm cables .................................................................................................................................................................................................................................... ...........................................................................................................................................
15 15 Hybriflex cable specifications Overview Purpose This chapter discusses the fiber optic cable requirements for the RRHs. The fiber optic cables are contained within the Hybriflex cable. Contents General facilities requirements 15-2 Facilities requirements 15-3 Requirements for Hybriflex cable 15-4 .......................................................................................................................................................................................................
Hybriflex cable specifications General facilities requirements .................................................................................................................................................................................................................................... General facilities requirements General requirements One fiber optic cable (from Hybriflex cable) is connected to each RRH. The fiber optic cables that exit the Hybriflex cable are terminated with LC connectors.
Hybriflex cable specifications Facilities requirements .................................................................................................................................................................................................................................... Facilities requirements Hybriflex connection at DC Distribution/Fiber Management Box The Hybriflex cable enters the DC Distribution/Fiber Management Box via a 1–1/2 inch knockout.
Hybriflex cable specifications Requirements for Hybriflex cable .................................................................................................................................................................................................................................... Requirements for Hybriflex cable Overview This section specifies the requirements for the Hybriflex cable, which connects the DC Distribution/Fiber Management Box to the RRH.
Hybriflex cable specifications Requirements for Hybriflex cable .................................................................................................................................................................................................................................... The fiber optic cables and DC cable pairs exit from each end of the Hybriflex cable. At the RRH end, the fiber optic cables and DC cable pairs are about 15 feet long.
Hybriflex cable specifications Requirements for Hybriflex cable .................................................................................................................................................................................................................................... Shown in the figure below is the DC Distribution/Fiber Management Box end (or bottom end) of the Hybriflex cable.
Hybriflex cable specifications Requirements for Hybriflex cable ....................................................................................................................................................................................................................................
Hybriflex cable specifications Requirements for Hybriflex cable .................................................................................................................................................................................................................................... 9927 Distributed BTS cabinet to the RRHs, make certain fiber cable connector “B” is connected to Tx on the 9927 Distributed BTS cabinet and fiber cable connector “A” is connected to Rx on the RRH.
Appendix A: 9927 Distributed Base Station Outdoor Cabinet site preparation checklists Overview Purpose This section is for use by authorized personnel to verify completion of cell site preparation activities prior to installation of base station equipment.
9927 Distributed Base Station Outdoor Cabinet site preparation checklists SP-GEN Cell site general information form .................................................................................................................................................................................................................................... SP-GEN Cell site general information form Purpose The following form must be completed prior to the installation of the cell site equipment.
9927 Distributed Base Station Outdoor Cabinet site preparation checklists SP-1 Site preparation general checklist .................................................................................................................................................................................................................................... SP-1 Site preparation general checklist Purpose The following items must be completed prior to the installation of the cell site equipment.
9927 Distributed Base Station Outdoor Cabinet site preparation checklists SP-1 Site preparation general checklist .................................................................................................................................................................................................................................... Item # Description Yes (Y) No (N) N/A 14. Is adequate primary surge protection provided for the T1/E1 service entrance? Y N N/A 15.
9927 Distributed Base Station Outdoor Cabinet site preparation checklists SP-2 Site preparation power source checklist .................................................................................................................................................................................................................................... SP-2 Site preparation power source checklist Purpose The following items must be completed prior to the installation of the cell site equipment.
9927 Distributed Base Station Outdoor Cabinet site preparation checklists SP-3 Site preparation grounding checklist .................................................................................................................................................................................................................................... SP-3 Site preparation grounding checklist Purpose The following items must be completed prior to the installation of the cell site equipment.
9927 Distributed Base Station Outdoor Cabinet site preparation checklists SP-3 Site preparation grounding checklist .................................................................................................................................................................................................................................... Item # Description Yes (Y) No (N) N/A 10.
9927 Distributed Base Station Outdoor Cabinet site preparation checklists SP-3 Site preparation grounding checklist .................................................................................................................................................................................................................................... Item # 22.
9927 Distributed Base Station Outdoor Cabinet site preparation checklists SP-5 Site preparation GPS antenna checklist .................................................................................................................................................................................................................................... SP-5 Site preparation GPS antenna checklist Purpose The following items must be completed prior to the installation of the cell site equipment.
9927 Distributed Base Station Outdoor Cabinet site preparation checklists SP-5 Site preparation GPS antenna checklist .................................................................................................................................................................................................................................... Item # Description Yes (Y) No (N) N/A 14. Was GPS antenna location verified for line of sight using a Garmin 45XL test unit or equivalent? Y N N/A 15.
9927 Distributed Base Station Outdoor Cabinet site preparation checklists SP-6 Site preparation punchlist sheet .................................................................................................................................................................................................................................... SP-6 Site preparation punchlist sheet Purpose The following punchlist is used to track any outstanding site preparation items.
9927 Distributed Base Station Outdoor Cabinet site preparation checklists SP-6A Site preparation punchlist sheet .................................................................................................................................................................................................................................... SP-6A Site preparation punchlist sheet Purpose The following punchlist is used to track any outstanding site preparation items.
Appendix B: Site preparation checklists for RRHs Overview Purpose This section is for use by authorized personnel to verify completion of cell site preparation activities prior to installation of base station equipment.
Site preparation checklists for RRHs SP-GEN cell site general information ....................................................................................................................................................................................................................................
Site preparation checklists for RRHs SP-1 Site preparation general checklist .................................................................................................................................................................................................................................... SP-1 Site preparation general checklist Purpose The following items must be completed prior to the installation of the cell site equipment.
Site preparation checklists for RRHs SP-1 Site preparation general checklist .................................................................................................................................................................................................................................... Item # Description Yes (Y) No (N) N/A 11.
Site preparation checklists for RRHs SP-1 Site preparation general checklist .................................................................................................................................................................................................................................... Notes: 1. Completed by: ______________________ 2. Date: _______ ......................................................................................................................................
Site preparation checklists for RRHs SP-2 Site preparation power source checklist .................................................................................................................................................................................................................................... SP-2 Site preparation power source checklist Purpose The following items must be completed prior to the installation of the cell site equipment.
Site preparation checklists for RRHs SP-3 Site preparation grounding checklist .................................................................................................................................................................................................................................... SP-3 Site preparation grounding checklist Purpose The following items must be completed prior to the installation of the cell site equipment.
Site preparation checklists for RRHs SP-3 Site preparation grounding checklist .................................................................................................................................................................................................................................... Item # Description Yes (Y) No (N) N/A 10.
Site preparation checklists for RRHs SP-4 Site preparation RF antenna checklist .................................................................................................................................................................................................................................... SP-4 Site preparation RF antenna checklist Purpose The following items must be completed prior to the installation of the RF cell site equipment.
Site preparation checklists for RRHs SP-4 Site preparation RF antenna checklist .................................................................................................................................................................................................................................... Item # Description Yes (Y) No (N) N/A 17. Have diversity antennas been properly separated? Y N N/A 18.
Site preparation checklists for RRHs SP-5 Site preparation punchlist sheet .................................................................................................................................................................................................................................... SP-5 Site preparation punchlist sheet Purpose The following punchlist is used to track any outstanding site preparation items.
Site preparation checklists for RRHs SP-5A Site preparation punchlist sheet .................................................................................................................................................................................................................................... SP-5A Site preparation punchlist sheet Purpose The following punchlist is used to track any outstanding site preparation items.
Appendix C: 9927 Distributed Base Station Outdoor Cabinet cell site information Overview Purpose This section is for use by Customer Project Management to document cell site configuration information. Contents CSC-1 Cell site configuration information C-2 ...................................................................................................................................................................................................................................
9927 Distributed Base Station Outdoor Cabinet cell site information CSC-1 Cell site configuration information ....................................................................................................................................................................................................................................
9927 Distributed Base Station Outdoor Cabinet cell site information CSC-1 Cell site configuration information ....................................................................................................................................................................................................................................
9927 Distributed Base Station Outdoor Cabinet cell site information CSC-1 Cell site configuration information ....................................................................................................................................................................................................................................
9927 Distributed Base Station Outdoor Cabinet cell site information CSC-1 Cell site configuration information ....................................................................................................................................................................................................................................
9927 Distributed Base Station Outdoor Cabinet cell site information CSC-1 Cell site configuration information .................................................................................................................................................................................................................................... ..........................................................................................................................................................................
Appendix D: Guidelines for lifting and moving cabinets Overview Purpose This Appendix provides guidelines for lifting and moving the 9927 Distributed Base Station Outdoor Cabinet cabinets and the 60ECv2 battery cabinet. Contents Lifting and moving cabinets D-2 ...................................................................................................................................................................................................................................
Guidelines for lifting and moving cabinets Lifting and moving cabinets .................................................................................................................................................................................................................................... Lifting and moving cabinets Purpose Cabinets are usually shipped to the customer via truck and are delivered to the installation site.
Guidelines for lifting and moving cabinets Lifting and moving cabinets .................................................................................................................................................................................................................................... • • Do not operate a derrick until both stabilizers are extended and firmly supported. Do not extend stabilizers after a load is suspended from the derrick.
Guidelines for lifting and moving cabinets Lifting and moving cabinets ....................................................................................................................................................................................................................................
Guidelines for lifting and moving cabinets Lifting and moving cabinets .................................................................................................................................................................................................................................... Secure each lifting eyebolt at the top of the cabinet, as shown in the previous figures, and ensure the shoulder of the eyebolts is properly seated.
Guidelines for lifting and moving cabinets Lifting and moving cabinets ....................................................................................................................................................................................................................................
Appendix E: GPS antenna installation Overview Purpose This appendix contains the information needed to install the GPS antenna. Contents GPS antenna installation (general) E-2 RF interference considerations E-4 Lightning interference consideration E-5 GPS antenna mount kit E-9 GPS antenna mounting instructions E-11 Active GPS antenna Standard Wave Ratio (SWR) test E-15 ..............................................................................................................................
GPS antenna installation GPS antenna installation (general) ....................................................................................................................................................................................................................................
GPS antenna installation GPS antenna installation (general) .................................................................................................................................................................................................................................... Obstructions and interference The following types of obstructions and possible sources of interference need to be considered: • Hills, mountains, trees and surrounding plant life.
GPS antenna installation RF interference considerations ....................................................................................................................................................................................................................................
GPS antenna installation Lightning interference consideration .................................................................................................................................................................................................................................... Lightning interference consideration Lightning considerations Industry standard practices for lightning protection should be followed for GPS antenna installations.
GPS antenna installation Lightning interference consideration .................................................................................................................................................................................................................................... Important! The percentage of protection for the shaded zone is 96%.
GPS antenna installation Lightning interference consideration ....................................................................................................................................................................................................................................
GPS antenna installation Lightning interference consideration .................................................................................................................................................................................................................................... ..........................................................................................................................................................................................................................
GPS antenna installation GPS antenna mount kit .................................................................................................................................................................................................................................... GPS antenna mount kit General GPS antenna mount kit are available from Andrews in several forms.
GPS antenna installation GPS antenna mount kit .................................................................................................................................................................................................................................... Collar Bracket Mount Kit (Part #602214) Item # Part # Quantity Description 2 602190 1 Gasket 3a 602189 4 #10-32 UNF x 0.5" Captive Screw 4a 9978-78 2 0.25" - 20 UNC-3A x 1.
GPS antenna installation GPS antenna mounting instructions .................................................................................................................................................................................................................................... GPS antenna mounting instructions Standard mount kit Perform the following steps and refer to the following diagram to mount the GPS antenna. (See “Bracket mount kits parts lists” (p.
GPS antenna installation GPS antenna mounting instructions .................................................................................................................................................................................................................................... ...................................................................................................................................................................................................
GPS antenna installation GPS antenna mounting instructions .................................................................................................................................................................................................................................... ...................................................................................................................................................................................................
GPS antenna installation GPS antenna mounting instructions .................................................................................................................................................................................................................................... ...................................................................................................................................................................................................
GPS antenna installation Active GPS antenna Standard Wave Ratio (SWR) test .................................................................................................................................................................................................................................... Active GPS antenna Standard Wave Ratio (SWR) test SWR test The RF signals from the GPS satellites are extremely low-level microwave signals that must reach the RFTG with minimal distortion and loss.
GPS antenna installation Active GPS antenna Standard Wave Ratio (SWR) test .................................................................................................................................................................................................................................... .............................................................................................................................................................................................................
Appendix F: Power and Battery Engineering Rules for 9927 Distributed Base Station Outdoor Cabinet Overview Purpose This appendix contains a copy of the document Power & Battery Engineering Rules for Alcatel-Lucent CDMA Modular Cell 4.0B, ER_0102_0004_PWR, which is the primary source for power requirements and battery backup information for the 9927 Distributed Base Station Outdoor Cabinet. Contents Engineering Rules Document F-2 ............................................................................
Power and Battery Engineering Rules for 9927 Distributed Base Station Outdoor Cabinet Engineering Rules Document ....................................................................................................................................................................................................................................
Appendix G: Product conformance statements Overview Purpose This section presents the product conformance statements that apply to the 9228 Base Station cabinet. In regions such as North America and the European Union, the statements that are required are determined primarily by national or multinational regulations. However, in some regions, contract terms determine which statements are required.
Product conformance statements Canada .................................................................................................................................................................................................................................... Canada Introduction The statements that follow are the product conformance statements that apply to the 9228 Base Station sMacro cabinet when deployed in Canada.
Product conformance statements Canada .................................................................................................................................................................................................................................... Antenna exposure Antenna installations for the 9228 Base Station cabinet shall be performed in accordance with all applicable manufacturer's recommendations, and national laws and regulations.
Product conformance statements Canada ....................................................................................................................................................................................................................................
Product conformance statements European Union .................................................................................................................................................................................................................................... European Union Introduction The statements that follow are the product conformance statements that apply to the 9228 Base Station cabinet bearing the CE Marking and when deployed in the European Union.
Product conformance statements European Union .................................................................................................................................................................................................................................... Antenna exposure Antenna installations for the 9228 Base Station cabinet shall be performed in accordance with all applicable manufacturer's recommendations, and national laws and regulations.
Product conformance statements European Union .................................................................................................................................................................................................................................... Optical transmitters Alcatel-Lucent declares that 9228 Base Station cabinet complies with the CENELEC standards EN 60825-1 Edition 1994 and its amendment 1 (2002) and amendment 2 (2001) and EN 60825-2 Edition 2004.
Product conformance statements European Union ....................................................................................................................................................................................................................................
Product conformance statements European Union .................................................................................................................................................................................................................................... For information regarding take-back, recycling, or disposal of equipment by Alcatel-Lucent or for equipment take-back requests, visit the Alcatel-Lucent Take-Back web page (http://www.alcatel-lucent.
Product conformance statements United States .................................................................................................................................................................................................................................... United States Introduction The statements that follow are the product conformance statements that apply to the 9228 Base Station cabinet when deployed in the United States.
Product conformance statements United States .................................................................................................................................................................................................................................... FCC Part 68 This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA.
Product conformance statements United States ....................................................................................................................................................................................................................................
Product conformance statements United States .................................................................................................................................................................................................................................... Antenna exposure Antenna installations for the 9927 Distributed Base Station cabinet shall be performed in accordance with all applicable manufacturer's recommendations, and national laws and regulations.