digi-TV 100 User Manual
Important Safety Instructions and Caution WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF POWER PLUG TO WIDE SLOT OF AC OUTLET AND FULLY INSERT (THIS WARNING IS VALID ONLY FOR US-TYPE PLUGS) . l 1. Read Instructions All the safety and operating instructions should be read before the product is operated. l 2.
l l l l l l l 7. Water and Moisture Do not use this product near water-for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like. 8. Accessories Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product.
l l l l l l 20. Servicing Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 21.
Precautions On Safety l l l l l l Do not use wet hands to pull out the plug. It may cause electrical shock. If the player does not work, please pull out the plug for safety. Contact us for further technical support. Before moving the player, please make sure the power adapter is disconnected from the wall outlet. Do not move the player when playing. It may cause a fire or electrical shock.
Table of Contents Parts of the Handheld TV ........................................... 1 Remote Control Operations........................................ 3 Remote Control Battery Installation ............................ 3 General Operating Instructions .................................. 4 Preparing the battery pack for use (Lithium battery) ..... 5 Charging the lithium battery ....................................... 7 Preparing the battery pack for use (Alkaline battery) .... 8 Basic operation........ ...
Parts of the Handheld TV Antenna LCD panel Power LED When the unit operates, the LED will glow green. Infrared remote sensor Allow remote controller to navigate this unit. Menu/Exit button OK/Mute button Multi selector (CH+(p )/CH-(q )/VOL+(u )/VOL-(t )) Speaker v y z { : Please refer to the page 12 for more detailed description.
Battery connector Eyelet for TV strap Earphone/Audio out connector Output the stereo audio signal. Video out connector Output the video signal. DC power connector Connect with the AC/DC power adapter or the car cigarette lighter power adapter.
Remote Control Operations (1) (13) (1) SOURCE: no function (14) (2) (2) POWER: power-on/stand-by selection (3) (15) (3) Channel selection up or move the (4) (16) cursor up (5) (17) (4) MENU: enter the setup menu (6) (18) (5) OK: select the highlight item (7) (19) (8) (20) (6) Volume down or move the cursor left (7) Channel selection down or move the (21) cursor down (9) (8) EXIT: exit the current setup (22) (9) Digital keys (10)RECALL: return to the last selected channel (23) (11)Red button : sub-title ke
Remote Control Battery Installation Before attempting to operate your remote control, install the battery as described below. (1) Turn the remote control face down. (2) Press down on the ridged area of the battery cover and slide it off. (3) Slide another battery in. General Operating Instructions Turning the unit ON or OFF To turn on the system, slide the Power switch of the unit to the position labeled “ON”. To turn off the system, slide the Power switch of the unit to the position labeled “OFF”.
Preparing the battery pack for use (Lithium battery) !T he handheld DTV with a battery pack to allow play back without any AC power adapter. !Make sure the lithium battery pack is properly attached to the unit and fully charged when use. Charging LED DC INPUT Attaching the battery pack (1) Matching the battery pack into the back of the Handheld DTV. (2) Press the battery pack downward until the battery pack locks onto the Handheld DTV.
IMPORTANT The Handheld DTV will turn off automatically when the battery is getting low . In this time, according the correct method to recharge your battery pack. !Charge your battery pack for a minimum of 4 hours to get fully charged. !When the battery pack is being charged, the LED will glow red. !After successfully charging the battery pack, the LED will glow green. !Please un-pack the battery when the battery is not working.
Charging the lithium battery Use Handheld TV and charge Battery simultaneously (1)Connect the large power adaptor into AC power outlet and the small plug of the DC cable into the charging plug on the side of the battery pack. (2)Charging time will be about 4 hours, but may increase if TV set is operated at the same time together with charging.
Preparing the battery pack for use (Alkaline battery) !T he handheld TV with a battery pack allows play back without any AC power adapter. !Make sure the alkaline battery pack is properly attached to the unit and has sufficiant capacity. Attaching the battery pack (1)According to the diagram, insert the batteries correctly according to the plus and minus markings. (2)Please use only high quality alkaline type batteries (6 pcs AA size) in the battery pack.
Detaching the battery pack !Detach the battery pack from the unit if you will be storing the unit for an extended period of time. !Ensure the unit is turned off before detaching the battery pack. !Detaching the battery pack from the unit as below steps. (1)Press the battery locker on the back of the unit. (2)Push out the battery pack upward until the battery pack unlock onto the unit. (3)Take out alkaline battery from the battery pack.
Basic Operation This section details the basic TV operations. KEY FUNCTION Channel selection Press [CH+] button or [CH-] button to select the TV/Radio channel in VHF and UHF Band Menu Press this button to enter or exit the menu mode . - + OK Mu t e + - Volume adustment Press [VOL-] button or [VOL+] button to adjust the volume. Mute control Press this button to mute or restore the volume.
MENU There are two pages of the menu, including program and system. You can use [VOL-] button to select each page. In the program page of the menu, you can highlight the service type, program list, preview, audio channel, subtitle language, program info, automatic search, or manual search to perform TV program related operation. And in the system page of the menu, you can highlight the brightness, TV system, regional setting, OSD language, time zone to adjust the system setting.
PROGRAM PAGE Service Type Selection of either TV or Radio programs Program List To show the information of all of the available channels Preview To preview up to 9 selected channels Audio Channel Selection of either master or secondary language Subtitle language To select a subtitle language available from service providers Program info To provide the TV program information about the system parameters and signal information Automatic Search To search the program channels automatically Manual Search To sea
SYSTEM PAGE Brightness To adjust the brightness of the screen TV System To select the TV display format Regional Setting To select the region where you are located in OSD Language Selection of the OSD language Time Zone To set the time zone SUBTITLE If the system operator provides multi-language subtitle. You can use [CH+] button and [CH-] button to select language and press [OK] button.
PROGRAM LIST (EPG, Electronic Program Guide) It shows the information of all of the available channels. You can use [CH+] button and [CH-] button to choose any channel, while [VOL-] button and [VOL+] button are the keys to show the details of the channel. Current program name Program List TV scene Next on program name PREVIEW Preview up to 9 selected channels. AUDIO Master/secondary language selection. You can use [VOL-] button and [VOL+] button to select the language you like to listen.
MANUAL SEARCH You can use [VOL-] button and [VOL+] button to select the desired channel and press [OK] button to perform program searching. The found programs will be appended to the program list. Selected channel Channel information Signal information PROGRAM INFORMATION It provides you the TV program information about the system parameters and signal information. Press [MENU] button to exit the screen.
First Time to Setup When the first time this unit is turned on, please follow the following steps to finish the initialization. 1 2 Press [MENU] button first and then press [VOL-] button to enter the menu for system configuration selection. Press [VOL+] button to adjust the brightness level of the display and press [OK] button. 3 4 Press [VOL+] button and highlight your TV system output and press [OK] button. Press [VOL+] button and highlight your OSD language and press [OK] button.
7 8 Back to the top of menu and press [VOL-] button to enter program menu screen. 9 Highlight the automatic search item and press [OK] button. 10 Highlight the OK item and press [OK] button. Channel searching will take a few minutes. 11 12 When the channel searching is over, press [CH+] button or [CH-] button to select the program. You could press [VOL+] button or [VOL-] button to adjust the volume.
Automatic Channel Searching Steps When you move to a new region that the system provider is different from the one before, you need to re-search the program channel. Please follow the following steps to do the channel searching. 1 2 - + OK Mute + - Press the [Menu] button to enter the menu screen. Press [VOL-] button and highlight your region and press [OK] button. 3 4 Highlight the automatic search item and press [OK] button. Highlight the OK item and press [OK] button.
Connection to TV Set When you want to connect the unit to a television, please refer to the manual of the equipment to be connected as well. Before connecting the Handheld DTV to other equipments, please turn power off and unplug all equipments from the wall outlet. Audio (GREEN) Video (Yellow) NOTICE DO NOT connect unit through your video cassette recorder when setting up your home entertainment system, because the picture may not be played correctly due to the copy guard.
Trouble Shooting Q&A Before requesting service for this unit, check the table for a possible cause of the problem. You are may eliminate problems and restore the proper operation after you check out the following table and do some minor adjustment on your part. Problem No picture, no audio The number of DVB-T channels is not as many as we expected.
Specification 3.5” COLOR TFT-LCD with 480 dots x 234 lines resolution Display Brightness: 230 nits; Contrast ratio: 250:1 View angle: 90° (Horizontal) / 50°(Vertical) Antenna Built-in telescopic antenna for VHF and UHF band reception Speaker Built-in 0.5W/8 speaker Output 3.5mm Audio/Video connector Interfaces LED 3.
This TV receiver does not contain hazardous material and is RoHS conform. It complies to all relevant requirements of European Directives, like EMC, LVD, RoHS and WEEE and carries the CE marking. Please take care that defective electronic items will not be disposed into normal household trash. Specialized collecting points will accept Your electronic waste free of charge and will take care for effective recycling of all electronic products.
