ALBA - Set Top Box Installation & User Instructions – Please keep for future reference 532/2226 (D) Important – Please read these instructions fully before installing or using These instructions contain important information which will help you get the best from your appliance and ensure safe and correct installation, use and maintenance.
Contents Safety Information 2 Safety warning 2 2-core plug information 2 Functions & Controls 3 Installation 4 Making the connections 4 Connection to a TV 4 Remote control battery installation 4 User Instructions 5-13 Getting started 5 System power ON / OFF 5 Switching between Radio & TV 5 Volume controls 5 Using subtitles 5 Using digital text 5 The info banner 6 Quick station select menu 6 Last program recall 6 Audio & language selection 6 Electronic program guide
Safety Information Important – Please read these instructions fully before installation Safety Warning • • • • • • • • • • • • • • Attempts to repair this will invalidate the warranty. Refer repairs to this CDVB5 to a qualified service personnel only. Do not disassemble this CDVB5. There are dangerous-voltage parts inside that may cause electric shock even after power is disconnected. Store your CDVB5 in a clean, dry environment.
Functions Please familiarize yourself with the parts and accessories listed below Parts included 1 x Main Unit 2 x AAA batteries Features & Functions 1 x Remote Control 1 1 1 3 3 4 4 MAIN UNIT 1. Remote sensor 3 4 2. LED indicator 3. Antenna input 4. Loop output 5. Scart socket 6. Mains cable 2 2 2 5 5 6 6 5 6 REMOTE CONTROL 7. POWER/STANDBY button 8. Numeric keypad 9. FAVOURITE PROGRAM button 10. EPG button 11. SUBTITLE button 12. MENU button 13. ZOOM button 14. SCROLL UP button 15.
If you have damaged or missing parts, call the Customer Helpline: 0870 600 3030 Installation Important – Please read these instructions fully before using Making the connections PVR/VCR TV AERIAL SCART TO SCART CABLE How do I connect the CDVB5 to my TV set? Fitting the batteries in the remote 1. Put the CDVB5 on a firm, level surface with at least 10 centimetres gap around all the sides and close to the TV you are going to connect it to. 1. Remove the battery cover.
User Instructions Getting started 1. The first time you power on the CDVB5 when connected correctly you will see the following screen. 2. Use the and the / / buttons to navigate up or down buttons to change the options. 3. When complete press the ENTER button. You will be asked if you want to complete the installation. Use the / buttons to select YES and then press the ENTER button to finish the installation. 4. A channel search will automatically begin and list all the available stations.
User Instructions The info banner Quick station select menu The info banner can be accessed when your are watching a TV programme. 1. Press the INFO button once to display the current and next program on the current channel. 2. Press the INFO button again to display more detail of the current program in view. NOTE: You can customise the quick select menu further using channel grouping to assign descriptions to channels & also add a favourite mark to filter channels based on your favourites.
User Instructions Audio & language selection 1. Use the / buttons to navigate to the language you wish to hear and press the ENTER button to select. 2. You can also select between STEREO, RIGHT or LEFT channel audio by pressing the / buttons to cycle through the options. Press the ENTER button to select and view the channel. Electronic program guide The EPG (Electronic Program Guide) is an on-screen TV guide. it shows all scheduled programmes seven days in advance for every available channel. 1.
User Instructions Digital TV 2. You will note the key for the coloured button Digital TV 4. Press the EXIT button, select YES from the option menu, then press ENTER to delete the marked channels. Move a channel It is possible to re-arrange the order channels are displayed in the EPG. 1. Use the / buttons to scroll through the list of available channels. commands on the bottom panel of the interface. RED: Favourite, YELLOW: Move, BLUE: Lock & GREEN: Delete. Setting favourite channels 1.
User Instructions Digital TV Digital TV require the 4 digit pass code. Rename a channel 1. Press either / to rename the selected channel. 2. Use the numeric keypad to assign a new name. Press each number repeatedly to cycle through the characters assigned to that number. The on- screen key shows a visible reference. 3. After adding each letter or number wait for a few seconds before adding another. 4. Press the ENTER button to store the new name.
User Instructions Digital TV Digital TV 1. Select the DELETE ALL option from the Channel manager menu. 2. A 4 digit pass code is required to proceed with this function. The default code is ‘0000’. 3. Once the pass code has been entered you will have a choice of “All TV Channels” or “All Radio Channels”. Press ENTER to make the selection. 2. Press the ENTER button and wait for the search to commence.
User Instructions Configuration default is 6 seconds. Use the / through the options 1-6 seconds. Configuration buttons to cycle Saturation: Use the / buttons to enter the Saturation level options. Then use the / buttons to select from 0 to 12. Press ENTER to apply the saturation level setting. System Settings EQ Setup: The sound can be altered with EQ presets. Use the / buttons to cycle through the options of: Standard, Classic, Rock, Jazz & Pop. OSD Trans: Controls the translucency of the interface.
The Setup Menu Configuration Time Settings Timer Mode: When set to AUTO the system’s time settings will be obtained from the transmission signal. To set manually use the / buttons to select MANUAL. Configuration CHANNEL or ON. • Wakeup Channel: Select the channel you wish to view. • Wakeup Date: Use the displayed calendar to 1. Scroll down to the DATE setting using the / buttons.
User Instructions Configuration Configuration program to a PVR or VCR via the scart socket while your out. The selected program is on BBC2 at 3.30pm and lasts for 2 hours. 1. The settings would be as follows: Timer No 1 TImer Mode Once Wakeup Mode Channel Wakeup Channel BBC2 Wakeup Date 11.04.2010 On Time 15:30 Duration 02:00 2. Press the EXIT button a number of times to return to the TV and save the setting you just set. You can now continue to watch the TV or press the STANDBY button. 3.
Care and Maintenance Important: Always unplug the appliance from the power socket during cleaning and maintenance. • • Never use any sharp instruments or abrasive substances, soap, household cleaner, detergent or wax polish for cleaning. Clean the external surfaces with a damp soft cloth only. Never use abrasive products or solvents as it may damage the appliance. Troubleshooting In the unlikely event of difficulties with your appliance please follow the trouble shooting guide below.
Technical Specifications Tuner Input Level Input Impedance -77 ~-20dBm 75Ω Channel Decoding Waveform Demodulation FEC Mode Guard COFDM QPSK,16QAM,64QAM 1/2, 2/3, 3/4, 5/6. 7/8 2K, 8K 1/4, 1/8, 1/16, 1/32 Demultiplexer Standard Input Max. Bit Stream Rate ISO/IEC 13818-1 60Mbps(Serial)/7.
Guarantee PRODUCT GUARANTEE This product is guaranteed against manufacturing defects for a period of Year This product is guaranteed for twelve months from the date of original purchase. Any defect that arises due to faulty materials or workmanship will either be replaced, refunded or repaired free of charge where possible during this period by the dealer from whom you purchased the unit.
