Instructions / Assembly

REPLACEMENT PARTS

Please do not contact the company purchased from as we can help you faster.

Order replacement parts and hardware at"boltonfurniture.com"

www.boltonfurniture.com

ASSEMBLY INSTRUCTIONS

Tool Included

27"W x 29"H Wall Mounted Bathroom Storage Cabinet with 2 Doors and

Towel Rod

. Use of power tool to assemble

this product will invalidate any

claim and damage this product

making it unsafe!!!

. Please assemble on a clean soft

surface to avoid damage.

50 minutes

Page1 27"Wx29"H WALL MOUNTED BATHROOM STORAGE CABINET WITH 2 DOORS AND TOWEL ROD2020/11/17

PAGE 1
ASSEMBLY INSTRUCTIONS 27"W x 29"H Wall Mounted Bathroom Storage Cabinet with 2 Doors and Towel Rod REPLACEMENT PARTS Please do not contact the company purchased from as we can help you faster. Order replacement parts and hardware at"boltonfurniture.com" Tool Included ! . Use of power tool to assemble this product will invalidate any claim and damage this product making it unsafe!!! . Please assemble on a clean soft surface to avoid damage. 11 12 1 2 10 3 9 4 8 7 6 5 50 minutes www.
PAGE 2
Part List-27"W x 29"H Wall Mounted Bathroom Storage Cabinet with 2 Doors and Towel Rod Identifying the hardware-Identify the hardware using the illustrations below. www.boltonfurniture.
PAGE 3
Step 1 Remove the French Cleat (B) from the back of the Bath Storage Cabinet (A) by unscrewing 2 pre-installed Wood Screws (E) from the top of the cabinet. Locate studs behind drywall in desired location. Attach French Cleat (B) to Wall Studs in at least 2 locations with Wood Screws (E) Step 2 If hole locations do not align with stud in wall, install the EZ Anchor(F) in to drywall by tapping it in to the predrilled pilot holes up to the thread, and then screwing the EZ Anchor in to the drywall.
PAGE 4
Step 3 Step 4 Page4 www.boltonfurniture.
PAGE 5
Step 5 Set Bath Storage Cabinet (A) on French Cleat (B). Secure Bath Storage Cabinet (A) to French Cleat (B) by installing 2 Wood Screws (E). www.boltonfurniture.