User's Manual

ManualsBrandsAlarm.com ManualsElectronicsMotion Sensor which Generates Images of the Motion

Rhein Tech Laboratories, Inc. Client: Alarm.com

360 Herndon Parkway Model: ADC-IS-220-GC

Suite 1400 Standards: FCC 15.247/IC RSS-210

Herndon, VA 20170 ID’s: YL6-143220ISGC/9111A-143220ISGC

http://www.rheintech.com Report #: 2015124

Page 37 of 49

Appendix K: Manual

Please refer to the following pages.

Summary of content (4 pages)

PAGE 1
Rhein Tech Laboratories, Inc. 360 Herndon Parkway Suite 1400 Herndon, VA 20170 http://www.rheintech.com Appendix K: Client: Alarm.com Model: ADC-IS-220-GC Standards: FCC 15.247/IC RSS-210 ID’s: YL6-143220ISGC/9111A-143220ISGC Report #: 2015124 Manual Please refer to the following pages.
PAGE 2
GIG part number: 2GIG-IMAGE1 Alarm.com part number: ADC-IS-220-GC Alarm.com Image Sensor for 2GIG Go!Control Installation Guide o. Perform a cell phone test to ensure that the updated equipment list is sent to Alarm.com. The sensor is now learned into the panel. After enrollment, be sure to keep the sensor and panel powered so the sensor can complete an initialization process with the Alarm.com Network Operations Center. This process will take several minutes.
PAGE 3
Alarm.com Image Sensor Installation Guide upload quota. Test images can also be requested via www.alarm.com/imagesetup without needing a Dealer website login. If possible, installers should also test night vision captures to ensure sensor infrared flash is not reflecting off surfaces and washing out images. To access the Mobile Tech website, go to www.alarm.com/MobileTech and login with an Alarm.com Dealer website login name and password.
PAGE 4
Alarm.com Image Sensor Installation Guide Attempting to Rejoin Network Figure 4. Removing Sensor for Battery Replacement *The operation of the sensor with alkaline batteries has not been verified for compliance with UL standards. OTHER FEATURE COMPATIBILITY Two-Way Voice Compatibility Images cannot be transmitted while a Two-Way Voice call is in session.