Users’ manual GAMING TABLE MANAGEMENT SYSTEM (GTMS)
Contents Caution Chapter 1 Introduction Overview Product Description Checklist Drawing of Modules Chapter 2 Installation Drawing of interconnection Chapter 3 Operation Technical Specifications
Caution Circuit devices are sensitive to static electricity, which can damage their delicate electronics. Dry weather conditions or walking across a carpeted floor may cause you to acquire a static electrical charge. To protect your device, always l Touch the metal chassis of your computer before you pick up the circuit device. This grounds the static electrical charge. l Pick up the device by holding it on the left and right edges only.
Checklist The GTMS should contain the following items. l 1 TM l 1 PM l 1 Battery l 1 Power adaptor for PM l 1 RS-232C serial cable l 1 Floppy Disk l 1 Battery cable Drawing of Modules 1.
2. PM Chapter 2 Installation Please follow these steps to install GTMS: 1. Verify that voltage of AC power supply is correct before plugging in power cable 2. Attach one end of the serial cable to the RS-232C port on the computer, and the other end to PM port. RS-232C 3. Copy PC program “com-test.exe” from floppy disk to PC. 4. Power on PM with power adaptor.
5. Power on TM with battery. 6. Execute com-test.exe on Window 95/98 operation system (O/S). 7. Select com port that is connected with PM. 8. Check Hex menu. 9. Click Port Set Chapter 3 Operation When keys in TM are pressed, key data are displayed on PC program.
2 1 3 4 5 7 6 8 9 key key data power on 79 04 00 00 00 00 7d 4 79 04 00 00 12 01 01 6f or 79 04 00 00 92 01 01 ef 5 79 04 00 00 12 01 20 4e or 79 04 00 00 92 01 20 ce 7 79 04 00 00 12 01 08 66 or 79 04 00 00 92 01 08 e6 8 79 04 00 00 12 01 02 6c or 79 04 00 00 92 01 02 ec 9 79 04 00 00 12 01 10 7e or 79 04 00 00 92 01 10 fe Note: When the key 1,2, or 3 is pushed without dropped chip(s), then it make a beep to notice that it is a wrong sequence.
Wireless Transfer Rate : 1Kbps (kilobits per second) RS-232C Trnasfer Rate: 9600bps (bits per second) AC Line Voltage : 110/240 ~ AC DC 7.5V Frequency 50/60 Hz Battery Voltage : DC 7.
Caution: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment. Information to User: This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
