User's Manual

ManualsBrandsAL Tech ManualsElectronicsUSB Memory Device

FCC Information

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15

of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the

following measures :

- Reorient of relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

CAUTION : Changes or modifications not expressly approved by the manufacturer responsible for

compliance could void the user’ s authority to operate the equipment.

Summary of content (6 pages)

PAGE 1
FCC Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
PAGE 2
■ In the package 1. AnyDrive 1EA 2. USB extension cable 1EA 3. Driver CD 1EA 4. Neckless line 1EA 5. User manual and warranty card ■ Specification 1. Size and weight : 85× 20× 10mm, 21g 2. A Kind : 32MB 3. Interface : Supported USB 1.1 standard(12Mbps), USB 2.0 compatible ■ Using environment 1. Notebook, desktop or Macintosh with USB port 2. Windows 98, ME, 2000, XP, Linux 2.4.X and Mac OS 9.0 ■ Special feature 1. Wide compatible : Windows 98, ME, 2000, XP, Linux and Mac OS compatible.
PAGE 3
■ Install product (1) Install driver 1. Windows ME upper, Mac – OS Automatically install by OS. 2. Windows 98(SE) 1) When AnyDrive connect USB port, appear ‘Find new hardware’ message and follow window. 2) Select ‘Search for the best driver for your drive. (Recommended)’ and click ‘Next’.
PAGE 4
3) Check ‘Specify a location’, click ‘Browse..’ and select driver folder of driver CD. 4) After search driver, click ‘Next’.
PAGE 5
) After install driver, follow windows appear, USB Mass Storage Drive. 6) If driver is install normally, three factors are added as follow image.
PAGE 6
(2) Connect computer 1. When using USB extension cable – First connect USB extension cable to USB port, And connect USB drive to USB extension cable. 2. When directly connect – Connect directly USB drive to USB port. ■ Product performance 1. Read rate : Avg. 1MB/sec 2. Write rate : Avg. 642KB/sec *. Read/Write rate is different according to using OS and specification of computer. ■ Caution 1. Do not disconnect when red LED light rapidly up. Red LED means data are transferring now.