IT82A(869) Indoor Monitor Admin Guide
About this manual Thank you for choosing Akuvox’s IT82A(869) indoor monitor. This manual is intended for end users, who need to properly configure the indoor monitor. It provides all functions and configurations of the product, the information detailed in this manual applicable to firmware version 82.228.2.533.rom or lower version. Please verify the packaging content and network status beforesetting. The old firmware may be a little different from 82.228.2.533.rom about some configurations.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Thisdevice complieswithpart15oftheFCCRules.Operationissubjecttothefollowingtwoconditions:(1)Thisdevicemaynotcauseharmfulinterference,and(2) this device must accept any interference received, including interference that may cause undesiredoperation.
Content 1. ProductOverview ........................................................................................................................................................................... 6 1.1. ProductDescription ............................................................................................................................................................... 6 1.2. ConnectorIntroduction ..................................................................................................
4.1.1. Device Wi-Fisettings........................................................................................................................................................ 30 4.2. Accountsettings .................................................................................................................................................................. 31 4.3. Armingsettings...........................................................................................................................
1. ProductOverview 1.1. ProductDescription IT82A(869)isanAndroidSIP-basedwithsmoothtouch-screen Indoor monitor. It can be connected with Akuvox door phone for unlock andmonitor. Residents can communicate with visitors via audio and video call, and support remote unlock the door. It is moreconvenient and safe for residents to check the visitor identity through its video previewfunction. IT82A(869) is often applicable in villas , apartments, building and so on.
1.2. ConnectorIntroduction 8 PIN connector: For power supply and RS485 terminal. 10 PIN connector: For 8 security connectors. Network Interface(POE): Network Interface(POE) connector which can provide both power and network connection. RJ45 Interface: RJ45 Interface connector which can provide network connection. It can share the network access from Network Interface(POE) port to other equipment or PC connection. Note： 12V/1A dc from LPS or POE.
1.3.
2. DailyUse 2.1. Making acall There are 4 ways to make a call from the indoor monitor to other units, which can be another indoor monitor or an intercom app. 2.1.1. Calling from digitalkeypad ①Taptheicontoenterthecallinterface.Alsoyoucanpressthe intercom button . ②Enter the number to call on the digital keypad. ③Tapthedialkey,youcanchooseaudiocallorvideocalltodial out.
2.1.2. Calling fromphonebook ④Tap the icon to enter the phonebook. ⑤Search the list by number or alphabet. IT82A(869) supports fuzzy matching query. ⑥ Scroll up or down the pre-imported contact list to select contact. ⑦Tap the dial key next to the contact found to dial out. Note: If the contact has multiple numbers, after clicking the dial key, you need to choose the number you want to call. 2.1.3. Calling from calllog ①Press the icon to enter the call log interface.
②③You can directly slide up and down to choose the number from the call history. ④Tap the dial key, you can choose audio call or video call to dial out. ⑤Click to modify the log. Users can create a new contact, send the message or delete to this call log, or add this call log into Black Lists. 2.1.4. CallingCenter Press manage center button to make a call out, if you want to call management center (SDMC system). This function only can be used when IT82A(869) has registered fromSDMC.
2.2. Receiving aCall 2.2.1. Receive a incomingcall ①There will be a video preview in this window, when you receive a incoming call. ②Press this icon to pick up the incoming call as an video call. ③Press this icon to pick up the incoming call as a audio call. ④Press this icon to reject the incoming call. ⑤Press this icon to adjust the ring tone volume. 2.2.2. During the session ①The call video will be showed in this window. ②To adjust the volume here.
⑤Press this icon to mute the call. ⑥Press this icon to switch the call to another call mode(audio or video). ⑦Press this icon to hang up the current call. 2.3. Contact 2.3.1. Group ①Press the icon to enter the contact interface. ②Press the icon to check the groups IT82A(869) has. ③IT82A(869) has two groups-Default group and Black List. You can press the corresponding group to check the contacts. 2.3.2. Add a contact ④Select a group. Press the icon to add a contact. ⑤Type in the contact name.
⑥Type in the number 1, it can be a SIP number or IPnumber. ⑦Type in the number 2, it can be a SIP number or IPnumber. ⑧Type in the number 3, it can be a SIP number or IPnumber. ⑨Type in the RTSP URL of Door Phone, like rtsp://DoorPhone’s IP/live/ch00_0. ⑩Press this icon to save the contact. ⑪Press this icon to cancel the operations. 2.3.3. ManageContact Enter the contacts interface, ①select a group, ②select a contact. ③Press the icon to modify the selectedcontact.
⑧Press this icon to confirm to move the contacts to Black Lists. ⑨Press this icon to cancel the operations. 2.4. Status 2.4.1. BasicStatus To check IT82A(869)'s status by ①②pressing this icon. After entering the status interface, ③you can press the icon to check the check the basic status. You can check Software version, Firmware version, Firmware Model, Hardwareversion and soon. 2.4.2. NetworkStatus ④Press the icon to check the network status.
2.4.3. Account Status Afterenteringthestatusinterface,itshowstheaccountstatusas default. You can check the account number and status here, registered means it works normally. 2.5. Liveview ①Press the icon to check the live video via RTSP URL from predefined doorphone station or IPC which you set under the path "Settings-More-Live View". After entering the Live view configuring interface, ②you can press the icon to ③④add new RTSP URL of doorphone station or IPC, or click existed RTSP URL to edit.
2.6. Message(s) ①Press the icon to enter the message interface. There will be a notification here if there is any unread message. Or ② press this icon to enter the message interface. 2.6.1. Createmessage ③Press this line to add a new message for existed contacts directly. ④Press this icon to create a newmessage. ⑤Press the icon to add a contactmanually. ⑥Press the icon to select existedcontacts. ⑦Press this line to enter the content of the message. ⑧Press the icon to send the message.
2.6.2. Deletemessage ③Long press this icon to editmessages. ⑨ Tick the needed messages. Or ⑩you can select all messages. ⑪Press this icon to delete messages. ⑫Press the icon to cancel the operations. 2.7. Arming ①Press the icon to enter the Arming interface. ②IT82A(869) supports 4 mode, they are Home mode, Night mode, Away mode and Disarm mode. 2.7.1. ArmingMode ③Press this icon to enter the arming mode settings interface.
④You can see all of the 8 zones and corresponding sensor types(slide down to check more information) in this interface. ⑤Press this icon to set the defence delay time. It meanswhen you change to the arming mode from other modes, there will be 30 seconds delaytime. ⑥Press this icon to set the alarm delay. It means when the sensor triggered, there will be 30 seconds delay time to announce the notification. ⑦Tick/untick to enable/disable the corresponding zone under the selected mode.
2.7.2. Disarm Code ①Press this icon to enter the disarm code settings interface. You can modify the disarm code here. ②Enter the original disarm code first, it is 0000 as default. ③Enter the new disarm code. ④Enter the new disarm code again for confirming. ⑤Press save icon to save the modification.
2.7.3. Alarm Log ①Press this icon to enter the alarm log interface.You can see the alarm log here including location, zone, zone type and alarm time. ② Long press this line to edit alarm logs. Tick the selected alarm log. Or ③Press this icon to select all alarm logs. ④Press this icon to delete alarm logs. ⑤Press this icon to cancel the operations. 2.7.4. ZoneStatus ⑥Press the icon to enter the zone status interface.
2.8. Capture ① Press the icon to enter the capture interface. Or ② press this icon to enter folder interface, and then click Capture to enter capture interface. IT82A(869) supports capture the visitors photo when incoming preview. IT82A(869) can auto capture if ringing for 3 seconds without answer. 2.9. Assistance ①Press the icon to call out the emergency number in case of emergency. IT82A(869) will call out for three predefined numbers in a loop, each number will be called for 60s (by default).
3. Settings ① Press the icon to enter the basic settings interface. 3.1. Displaysettings ②Press this icon to enter display settings interface. ③To adjust the brightness here, it is 145 as default. There are 255 totally, the bigger value means the lighter screen. ④To configure the sleep mode delay, it is 1 minute as default. Afterthedelaytimewithoutanyoperation,thephonewillblack screen. Touch it to wakeup. ⑤ When it is in screen saver mode, to configure the time to make it display black screen.
⑧To select which size of words to display in the IT82A(869)'s screen. 3.2. Soundsettings ①Press this icon to enter the sound settings interface. ②You can set Ring Volume, Ring Tones for incoming call, and set the Talk Volume and Tone Volume(When IT82A(869) dials out a call, it will prompt the ‘du’ sound), or set the Notification Sound(When IT82A(869) receives messages, it will prompt).
3.3. Timesettings ①By pressing this icon to enter the time settings interface. ② Automatic Data Time(NTP,Network Time Protocol) is enabledasdefault,thenIT82A(869)willgettheDateandTime automatically.AlsouserscandisabletheAutomaticDataTime, andsettheDateandTimemanually.Anduserscanalsosetup NTP server. Setup a suitable Time Zone, Time format and DateFormat.
3.4. Language ①Press this icon to enter language setting interface. ②To select a suitable language. 3.5. Reboot ③Press the icon to reboot IT82A(869), click Confirm when you see the prompt. The phone will reboot.
3.6. Call Featuresettings ①Press this icon to enter call feature setting interface. ② To select all accounts or needed account to have the call feature. ③④⑤Therearethreetypesofforward:AlwaysForward,Busy Forward and No answerForward. Always Forward: Any incoming call will be forwarded in any situation. Busy Forward: Any incoming call will be forwarded if IT82A(869) is busy. No Answer Forward: Any incoming call will be forwarded if IT82A(869) do not answer the call after a specific time.
⑦Click the icon to save the modified. 3.7. Applications ①Press this icon to enter application interface. You can install 3rd party app from here. Please consult your administrator for more information. 3.8. Folder ①Press this icon to enter folder interface. To check the local and SD card files. IT82A(869) supports external SD card.
4. AdvanceSettings ① Press the icon in settings interface, enter the password(123456 by default) and press Confirm to enter the advance settings interface. 4.1. Networksettings ② Press this icon to enter network settings interface. IT82A(869) use DHCP mode to obtain IP address by default. ③ Tick the DHCP option to select DHCP network of IT82A(869). ④ Uncheck the DHCP option to select Static IP network of IT82A(869).
⑦Click icon to save the modified. 4.1.1. Device Wi-Fisettings In addition to wired connection, the device also supports Wi-Fi connection. You can set the Wi-Fi on device screen More > Setting > Advance >WLAN.
4.2. Accountsettings ① Press this icon to enter account settings interface. IT82A(869) only support one SIP account in this firmware version. ②Tick to active account 1 of IT82A(869). ③Configure the label of the account 1. When the account 1 is registered, the label will show in the account status interface. ④ Configure the display name of the account 1. When IT82A(869)dialoutacalltootherdevice,thedisplaynamewill show in otherdevice.
4.3. Device Bluetooth Setting After IT82A(869) series indoor monitors turn on the Bluetooth on the device Settings> Bluetooth screen, it can be paired with other devices via Bluetooth. Turn on the function and press the device you want to pair, then IT82A(869) and the pairing device will both show a Bluetooth pairing code. Press “PAIR” on the two devices to pair.
Note: SIP account is provided by SIP server. Please consult your administrator for SIP Server information. 4.4. Armingsettings ①Press this icon to enter zone settings interface. ② To choose a zone to set corresponding parameters. IT82A(869) support up to 8 zones, you can connect up to 8 alarm sensors to IT82A(869). ③Configure the location of the alarm sensor, including Gate, Door, Bedroom, Guest room, Hall, Window, Balcony, Kitchen, Study and Bathroom.
⑥ Configure the status of alarm feature, including disabled, enabled and 24H. Disabled option: Disable the IT82A(869) alarm feature. Enabled option: When the arming mode enabled and the alarmsensordeviceistriggered,IT82A(869)willgiveanalarm. The alerting can be off by entering the password on the IT82A(869)screen. 24H option: When the alarm sensor device is triggered(No matter the arming mode is enabled or not), IT82A(869) will give an alarm.
Note: After configuring the zone settings, turn back to main interface, to configure the arming mode settings, and enable the corresponding arming mode to enable the arming feature. 4.5. Assistancesettings ①Press this icon to enter assistance settings interface. ②Configure assistance call numbers. IT82A(869) support up to 3 numbers. ③Configure the call timeout. It is 60 seconds as default. ④Configure the loop times. It is 3 times as default. ⑤Click the icon to save the modified.
4.6. Unlock codesettings IT82A(869) use IT82A(869) support to unlock local door lock(Trigger the internal relay) or remote unlock during the call. ①Press this icon to enter unlock code settings interface. ② ③ Configure the unlock type. Softkey means Open Lobby icon which will show during the call. Hardware Key means Unlock button . DTMF: Remote unlock via using DTMF code. Relay: Unlock the local door lock. Auto: The type for Softkey is DTMF, for Hardware Key is Relay.
Note: For unlock, the DTMF code should be the same with the corresponding door phone’s, please consult your administrator for more information. ⑤Click the icon to save the modified. 4.7. System codesettings ⑥Press this icon to enter system code settings interface. ⑦Configure the new system code(When you try to enter the advance settings interface, it will prompt you for the system code) of IT82A(869). ⑧Click the icon to save the modified. 4.8.
②Configure the new settings code(When you try to enter the settings interface, it will prompt you for the settings code) of IT82A(869). The settings code is blank by default. ③Click the icon to save the modified. 4.9. Resetsettings ① Press Reset icon to reset IT82A(869) to factory settings. Choose one option and press confirm when you see the prompt. It will reset to factory settings automatically. Reset to factory setting option: Reset all data(in the directory /data) to factory settings.
application which you installed, contacts which you added, such kind of data will not be reset. 5. Website Web user interface (we will use Web UI for short in the following context) is used for users or administrator to check or change IT82A(869) settings. Click Settings-System Info icon on desktop to check the IT82A(869)’s IP address. Enter the IP address on browser, and enter the default User Name and Password: admin/admin to login the web interface.
5.1. Status-Basic 5.1.1. ProductInformation To display the device’s information such as Model name, MAC address (IP device’s physical address), Firmware version and Hardware firmware. 5.1.2. NetworkInformation To display the device’s Networking status(LAN Port),such as Port Type(which could be DHCP/Static), Link Status, IP Address, Subnet Mask, Gateway, Primary DNS server, Secondary DNS server.
5.1.3. Account Information To display device’s Account information and Registration status (account username, registered server’s address, Register result). 5.2. Account-Basic 5.2.1. SIPAccount To display and configure the specific Account settings. Status: to display the register result. Display Label: Which is displayed on the phone ’ s LCD screen. Display Name: Which is sent to the other call party for displaying.
Register Name: Allocated by SIP server provider, type in the extension number you want to register. User Name: Allocated by your SIP server provide, used for authentication. Password: Used for authorization. 5.2.2. SIP Sever1&2 To display and configure Primary or Secondary SIP server settings. Server IP: SIP server address, it could be an URL or IP address. Registration Period: IT82A(869) will re-register automatically within registration period.
5.2.3. Outbound Proxy Server An outbound proxy server is used to receive all initiating request messages and route them to the designated SIP server. 5.2.4. TransportType To display and configure Transport type for SIP message. UDP: UDP is an unreliable but very efficient transport layer protocol. TCP: Reliable but less-efficient transport layer protocol. TLS: Secured and Reliable transport layer protocol. DNS-SRV: A DNS RR for specifying the location of services. 5.2.5.
Stun:ShortforSimpleTraversalofUDPoverNATS,asolution to solve NATissues. 5.3. Account-Advanced 5.3.1. SIPAccount Account: IT82A(869) support single SIP account in this version. 5.3.2. Audio Codecs To display and configure available/unavailable codecs list. Codec means coder-decoder which is used to transfer analog signal to digital signal or vice versa. Familiar codecs are PCMU(G711U), PCMA(G711A), G722(wide-band codecs), G729 and so on.
5.3.3. VideoCodecs IT82A(869) support H263, H264 and H265 video codec. 5.3.4. VideoCodec To configure the video codec parameters. Codec Resolution: IT82A(869) supports the resolutions: QCIF,CIF, VGA, 4CIF and720P. Codec Bitrate: To configure bit rates of video stream. Codec Payload: To configure RTP audio video profile. 5.3.5. Subscribe To display and configure MWI, subscription settings. MWI: Message Waiting Indicator which is used to indicate whether there is unread new voice messages.
ACD: Automatic Call Distribution is often used in offices for customer service, such as call center. The setting here is to negotiate with the server about expire time of ACD subscription. 5.3.6. DTMF To configure RTP audio video profile for DTMF and its payload type. Type: Support Inband, Info, RFC2833 or their combination. How to Notify DTMF: Only available when DTMF Type is Info. DTMF Payload: To configure payload type for DTMF. 5.3.7. Call To display and configure call-related features.
Caller ID Header: To configure which Caller ID format to fetch for displaying on IT82A(869)’sUI. Auto Answer: If enabled, IT82A(869) will be auto-answered when there is an incoming call for designated account. Provisioning Response ACK: 100% reliability for all provisional message, this means it will send ACK every time the IT82A(869) receive a provisional SIP message from SIP server. Register/ Invite User=phone: If enabled, IT82A(869) will send user=phone within SIP message.
Missed Call Log: To display the miss call log. Prevent SIP Hacking: Enable or disable to prevent SIP from hacking. 5.3.8. Session Timer Active: If enabled, the ongoing call will be disconnected automatically once the session expired unless it’s been refreshed by UAC or UAS. Session Expire: Configure session expire time. Session Refresher: To configure who should be response for refreshing a session. 5.3.9.
5.3.10. NAT UDP Keep Alive Message: If enabled, IT82A(869) will send UDP keep alive message periodically to router to keep NAT port alive. UDP Alive Msg Interval: Keep alive message interval. RPort: Remote Port, if enabled, it will add Remote Port in to outgoing SIP message for designated account. 5.3.11. Conference Type: To select desired conference type. Conference URI: If network conference is selected, a network conference URI is needed to be input. 5.3.12.
information from SIP message. If user agent is not set by default,usercouldseethecompanyname,modelnumberand firmware version from SIPmessage. 5.4. Network-Basic To display and configure LAN Port settings. DHCP: If selected, IP phone will get IP address, SubnetMask, Default Gateway and DNS server address from DHCP server automatically. StaticIP:Ifselected,youhavetosetIPaddress,SubnetMask, Default Gateway and DNS server manually. 5.5. Network-Advanced To display and configure Local RTP settings.
Max RTP Port: Determine the maximum port that RTP stream can use. Starting RTP Port: Determine the minimum port that RTP stream can use. 5.6. Phone-Time/Lang To display and configure Time/Language. 5.6.1. WebLanguage To choose the web language. 5.6.2. NTP To configure NTP server related settings. Time Zone: To select local Time Zone for NTP server. Primary Server: To configure primary NTP server address.
5.7. Phone-CallFeature 5.7.1. Mode To enable or disable feature key sync. Feature Key Sync: To enable or disable feature key sync. Mode: Select the desired mode. 5.7.2. ForwardTransfer To display and configure Forward setting. Always Forward: Any incoming call will be forwarded in any situation. Busy Forward: Any incoming call will be forwarded if IT82A(869) is busy. No answer Forward: Any incoming call will be forwarded if it’s no answer after a specific time.
5.7.3. DND(Do NotDisturb) DND allows IT82A(869) to ignore any incoming calls. DND Emergency: Calls from the Authorized number can still be received after enable this function. DND Authorized Number: Setup authorized numbers for DND Emergency. DND Priority: Disable by default. Account: Select an account for DND. DND: Enable or disable this function. Return Code when DND: Determine what response code should be sent back to server when there is an incoming call if DND on.
DND Off Code: The Code used to turn off DND on server’s side, if configured, IT82A(869) will send a SIP message to server to turn off DND on server side if you press DND when DND is on. 5.7.4. Intercom Intercom allow user to establish a call directly with the callee Active: To enable or disable Intercom feature. Intercom Mute: If enabled, once the call established, the callee will be muted. Intercom Preview: If enabled, IT82A(869) can preview before the call. 5.7.5.
could be answering an incoming call, hangup an ongoing call and so on. Allowed Access IP List: To configure the allowed host address. 5.7.6. UACSTA Using CSTA for SIP phone user agents. It can control some features of calling. UACSTA is used to send ECMA-323(CSTA XML) information during SIP calling. The default status is disabled. 5.7.7. OpenLobby User can choose which types you need for each key. IT82A(869) supports 2 types to unlock, DTMF and Relay.
Softkey Type: To configure the OpenLobbyicon which will show during thecall. Hardware Key Type: To configure the Unlock hardware key button. DTMF: To configure the DTMF code when you choose DTMF code for one key. 5.7.8. DoorPhone To configure the delay time of auto answer the call from doorphone when disable the auto answer feature 5.7.9. Others To configure the DTMF code which can trigger the local relay or remote relay.
Auto Answer Delay: To configure delay time before an incoming call is automatically answered. Answer Mode: To configure the incoming call is answered via audio mode or video mode. Early DTMF: To enable or disable early DTMF. DTMF Pause Time: To configure the delay time to send out the DTMF code. Direct IP: To enable or disable direct IP call. 5.8. Phone-Audio 5.8.1. Echo Canceller To remove acoustic echo from a voice communication in order to improve the voice quality.
CNG (Comfort Noise Generation): Allow IT82A(869) to generate comfortable background noise during periods of silence in a conversation. 5.8.2. Automatical Generation Control To remove acoustic echo from a voice communication in order to improve the voice quality. Automatic Gain Control(Sending-side)/ (Receiving-side): Disabled by default. Automatic Gain Control Target: Range from 1 to 20 dB. 3dB by default. 5.8.3.
5.8.4. DoorbellSound To configure the sound for doorbell feature. 5.9. Phone-Video 5.9.1. MediaFeedback NACK: Enabled it to filter mosaic. Tmmbr: Send the maximum temporary rate request. Disabled by default. 5.9.2. H264Settings H264Profile: Thereare4modes-Base 、 Main 、 High 、 Extend profile. Different profiles makes different coding function and videoquality. H264 Level: Different profiles has corresponding Level value.
IDR Interval: IDR means Instantaneous Decoding Refresh. It is used to control the process of coding and decoding. Rate Control: Choose one H264 video rate. 5.9.3. Others Hardware Endec Acceleration: This function is used to solve the image issue. User can enable the Hardware Endec Acceleration when you need. Hardware Decodec Acceleration: Disabled by default. Color Enhancement: To increase the phone display color. Enabled by default. Image Quality: User can select Low, Middle or High mode.
5.10. Phone-Key/Display 5.10.1. SenseKey Allows user to assign specific feature to the designated sense keys. 5.10.2. InterfaceDisplay Allows user to assign specific feature to the main interface icon. 5.11. Phone-Key/Display 5.11.1. Contact All Contacts: To display or edit all local contacts. Black List: To display black list contacts.
5.11.2. Search To search a special contact. 5.11.3. Dial To dial out a call or hangup an ongoing call from Web UI. Note: For this feature, you need to have the remote control privilege to control IP phone via Web UI. Please refer to section“RemoteControl”intheWebUI->Phone->CallFeature page. 5.11.4. Contact Setting To add a new contact. Name: To set a name for the newcontact. Number1/ 2/ 3:Toset the number for the new contact.The number can be SIP number or IPnumber.
Group：You can set a group for the new contact. 5.11.5. Import/Export A easywayto manage mass of contacts. To import/export contacts with a XML file or CSV file. 5.12. Phonebook-CallLog 5.12.1. CallHistory To display call history records. Available call history types are All calls, Dialed calls, Received calls, Missed calls, Forwarded calls.
5.13. Upgrade-Basic 5.13.1. Upgrade-Basic GFirmware Version: To display the current firmware version. Hardware Version: To display the current hardware version. Upgrade: To select upgrading rom file from your PC manually, then click the submit to begin update. Note: Please make sure it is right file format for right model. Reset to factory setting option: Reset all data(in the directory /data) to factorysettings.
Reboot: To reboot IP phone remotely from Web UI. 5.14. Upgrade-Advanced 5.14.1. PNPOption PNP:PlugandPlay,oncePNPisenabled,thephonewillsend SIP subscription message to PNP server automatically to get Auto Provisioning server’saddress. By default, this SIP message is sent to multicast address 224.0.1.75(PNP server address by standard). 5.14.2. DHCPOption DHCP option: If configured, IT82A(869) will use designated DHCP option to get Auto Provisioning server’s address via DHCP.
Note:This setting require DHCP server to support correspondingoption. 5.14.3. ManualAutop To display and configure manual update server’s settings. URL: Auto provisioning server address. Username:Configureifserverneedsanusernametoaccess, otherwise leftblank. Password: Configure if server needs a password to access, otherwise leftblank. Common AES Key: Used for IP phone to decipher common Auto Provisioning configuration file.
Note: AES is one of many encryption, it should be configured only when configure file is ciphered with AES, otherwise left blank. 5.14.4. AutomaticAutoP To display and configure Auto Provisioning mode settings. This Auto Provisioning mode is actually self-explanatory. For example, mode “Power on” means IP phone will go to do Provisioning every time it powers on. 5.14.5. System Log To display system log level and export system log file. System log level: From level 0~7.
Remote System Log: To enable or disable Remote System Log. Remote System Server: To input the syslog server address. 5.14.6. Reboot Schedule Mode: To enable or disable IT82A(869) reboot in a specific time. Schedule: To configure a specific time for rebooting. 5.14.7. PCAP To start,stop packets capturing or to export captured Packet file. Start:To start capturing all the packets file sent or received from IP phone. Stop:To stop capturing packets.
Note:IP phone will save captured packets file to a temporary file, this file maximum size is 1M(mega bytes), and will top capturing once reaching this maximum size. 5.14.8. Others To export current config file or import new config file. 5.15. Security-Basic 5.15.1. Web PasswordModify To Modify the password for web GUI. User Name: Choose admin account or user account to modify corresponding password. Current Password: To type in the current password for authentication.
New Password: To set a new password. Confirm Password: To type in new password again for confirmation. 5.15.2. Session Time Out Session Time Out Value: To modify the session time out value, it is 300 by default. That means if it has been 300 seconds since you operated last time, you need to login again. 5.16. Security-Advanced 5.16.1. Web Server Certificate To display or delete Certificate which is used whenIT82A(869) is connected from any incoming HTTPsrequest.
Note: The default certificate could not be deleted. 5.16.2. Web Server CertificateUpload To upload a certificate file which will be used as server certificate. 5.16.3. Client Certificate To display or delete Certificates which is used when IP phone is connecting to any HTTPs server. 5.16.4. Client CertificateUpload To upload certificate files, this is used as client certificate. Only Accept trusted Certificates: If this option is enabled, only trusted certificates will beaccepted.
