C315W Indoor Monitor User Manual
About This Manual Thank you for choosing Akuvox’s C315W indoor monitor. This manual is intended for end users, who need to use and configure the indoor monitor. It provides an overview of the most essential functions and features of the product. The document is suitable for 115.1.2.2xx version. Please visit our forum or consult technical support for any new information or latest firmware.
FCC Caution: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Content 1. Product overview ........................................................................................................................................................................... 1 1.1. Product Description ................................................................................................................................................................ 1 1.2. Power connection ....................................................................................................
2.5.1. Arming Mode ............................................................................................................................................................... 11 2.5.2. Disarm Code................................................................................................................................................................ 12 2.5.3. Alarm Log ...................................................................................................................................
C315W User Manual 1. Product overview 1.1. Product Description C315W is a Android-based IP indoor monitor with a touch screen. It incorporates audio communications, access control sensor arming and obtaining video stream from door phone or IP camera. Figure 1.1-1 Its finely-tuned Android OS allows for better suit the habit of usage of local people.
C315W User Manual 1.2. Power connection Ethernet(POE): Ethernet(POE) connector which can provide both power and network connection. RJ45(PON): This is a special connector to provide power and Figure 1.2-1 interface network for E10 series. 12V/GND: External power supply terminal if POE is not available. RS485-A/B: RS485 terminal. Bell/GND: Connect a simple two-wire door bell. RelayA/B (NO/COM/NC): Relay control terminal. IO1-IO8/GND: Connect with different alarm detector for 8 security zones.
C315W User Manual 2. Daily use 2.1. Making a call There are two ways to make a call from the indoor monitor to other units. Call from Intercom, Contact or Call log. Figure 2.1-1 Call method 2.1.1. Calling from digital keypad Press Intercom in home page to enter the dial interface to dial the number directly. Choose a suitable phone account ① for the outgoing call. Note: C315W support 2 accounts. Please refer to admin guide for more account settings.
C315W User Manual 2.1.2. Calling from phonebook Enter the contact interface to make a call. C315W supports fuzzy matching query ①.To search the list by number or alphabet. Scroll up or down the pre-imported contact list ② to choose the contact you want to call. Select the right phone number ③ from the contact. Click Audio or Video mode ④ ⑤ to call out. Figure 2.1.
C315W User Manual 2.1.3. Calling from call log Press the Miss Call note ① to enter the call log interface. You can also enter Intercom interface to check call log ②. Then choose audio or video call to dial out. Figure 2.1.3-1 Miss call note Figure 2.1.
C315W User Manual 2.2. Receiving a call 2.2.1. Receiving a incoming call There will be a video preview in this window, when you receive a incoming call. Press Video or Audio key to pick up the incoming call. Press Cancel to reject the incoming call. Press + or - to adjust the ring tone volume in the right side. Figure 2.2.1-1 Receive call 2.2.2. During the session The call video will be showed in this window. Press Mute key to mute the current call.
C315W User Manual 2.3. Live view Live view feature is used to monitor the real-time video from the IPC or door phone anytime. Click Live View in home page. Figure 2.
C315W User Manual 2.3.1. Checking the monitor Choose the outdoor devices from the list . The real-time video from the door phone or IPC will show in the screen . Press Unlock to open the door which connected with door phone. Press Capture to take a photo from the outdoor devices. Press Cancel to exit the monitor. Press List button in the bottom right corner to switch the Figure 2.3.1-1 Live view list different outdoor videos.
C315W User Manual 2.4. Message(s) Press Message ① to enter the message interface. Or there will be a notification if there is any new message, click the New Message notification ② to check directly. 2.4.1. Text Message Figure 2.4-1 Message By entering the message interface, it is text message list. Users can check the message you received or what you sent here. Select a message to check the content. Hold the one of existed messages ①, it will show up delete prompt.
C315W User Manual 2.4.2. Creating a message Press New key ① to create a new message. Choose the contact from the contact list ② or enter the destination number manually ③. Choose the frequently-used message ④, such as “Hello”, “Help”. Or input the message content you want to send ⑤. Select line 1 or line 2 account ⑥ to send out. Figure 2.4.2-1 Create message Note: C315W support 2 accounts. Please refer to admin guide for more account settings. Press Send key ⑦ to send. Figure 2.4.
C315W User Manual 2.5. Arming Tap Arming to enter the Arming interface. C315W supports 4 mode, they are Home mode, Night mode, Away mode and disarm mode. 2.5.1. Arming Mode Figure 2.5-1 Arming Go to the path Arming - Arming mode. Users can see all of the 8 zones and corresponding sensor types. Slide down to check more information in this interface. Adjust Defence delay time. It means when you change to the arming mode from other modes, there will be 30 seconds delay time. To setup the Alarm delay.
C315W User Manual The Status the corresponding zone means whether the zone is available or not. Press Save in the top right corner to save the modification. 2.5.2. Disarm Code Go to the path Arming - Disarm Code to enter the disarm code settings interface. Users can modify the disarm code here. Enter the original disarm code ① first, it is 0000 as default. Enter the new disarm code ②. Enter the new disarm code again ③ for confirming. Press Save to save the modification. Figure 2.5.
C315W User Manual 2.5.3. Alarm Log Go to the path Arming - Alarm Log to enter the alarm log interface. Users can see the alarm log here including location, zone, zone type and alarm time. Hold a alarm log ①,it will show up delete prompt. Press Select All ② and click Delete ③ to delete all alarm log. Figure 2.5.3-1 Alarm log Press Cancel ④ to cancel to delete. Figure 2.5.
C315W User Manual 2.5.4. Status Go to the path Arming - Zone status to enter the zone status interface. Users can check the status of every zone, including location, zone type, trigger mode and status. Figure2.5.
C315W User Manual Abbreviations ACS: Auto Configuration Server DNS-SRV: Service record in the Domain Name System Auto: Automatically FTP: File Transfer Protocol AEC: Configurable Acoustic and Line Echo Cancelers GND: Ground ACD: Automatic Call Distribution HTTP: Hypertext Transfer Protocol Autop: Automatical Provisioning HTTPS: Hypertext Transfer Protocol Secure AES: Advanced Encryption Standard IP: Internet Protocol BLF: Busy Lamp Field ID: Identification COM: Common IR: Infrared CPE: Cust
C315W User Manual PCAP: Packet Capture SIP: Session Initiation Protocol PNP: Plug and Play SNMP: Simple Network Management Protocol RFID: Radio Frequency Identification STUN: Session Traversal Utilities for NAT RTP: Real-time Transport Protocol SNMP: Simple Mail Transfer Protocol RTSP: Real Time Streaming Protocol SDMC: SIP Devices Management Center MPEG: Moving Picture Experts Group TR069: Technical Report069 MWI: Message Waiting Indicator TCP: Transmission Control Protocol NO: Normal Opened
C315W User Manual Contact us For more information about the product, please visit us at www.akuvox.com or feel free to contact us by Sales email: sales@akuvox.com Technical support email: techsupport@akuvox.com Telephone: +86-592-2133061 ext.7694/8162 We highly appreciate your feedback about our products.
