AVX665 High Definition Digital Set Top Box Customer Help Line : 0845 293 7698 Website : www.ekey.co.
Contents Safety Information .................................................. 2 Safety Instructions .................................................. 3 Digital Switchover ................................................... 3 Accessories ............................................................ 4 User Controls.......................................................... 4 Remote Control ...................................................... 5 Connections.....................................................
Safety Information The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of un-insulated “dangerous voltage” within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to the persons. The exclamation point within an equilateral triangle is intend to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Safety Instructions CAUTION. PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS GIVEN IN THIS USER MANUAL AND MARKED ON THE APPLIANCE. RETAIN THIS BOOKLET FOR FUTURE USE. This set has been designed and manufactured to assure your personal safety. Improper use can result in Electric shock or Fire hazard. The safeguards in this appliance will protect you if you observe the correct procedures for installation, servicing and operation. There are NO user parts inside.
Accessories Please check the contents of the TV before you continue. If any item is missing please contact your point of purchase. Remote Control User Manual HDMI Lead User Controls 1. Power. Turns STB On from standby. Also returns STB to standby 2. CH - Reduces channel selection by 1 with each press. In menu mode will shift the selection 3. CH + Increases channel selection by 1 with each press. In menu mode will shift the selection upwards 4. LED. Displays STB status.
Remote Control 1. INFRA RED WINDOW. Transmits optical signal to receiver box 3. COLOURED BUTTONS. Access to Interactive services. 5. MENU. Press to display “On screen Menu 7. NAVIGATION BUTTONS. Allows navigation of menus. 9. SUBT. Switches the subtitle mode On and Off. 11. LANG/(AD). Selects Audio Languages “if transmitted”, Selects Subtitle language “if transmitted”. 13. MUTE. Press once to Mute sound, Press again to restore sound 15. GUIDE. Selects the EPG “Electronic Programme Guide”. 17. V+/V-.
Battery Fitting and Disposal 1. 2. 3. 4. Open the battery cover Fit two “AAA” batteries. Ensure the battery polarities are correct i.e + to + and – to -. Replace the battery cover To prevent injury, do NOT break open or throw exhausted batteries in a fire. Do not mix batteries, old and new, Carbon or Alkaline. Do not use re chargeable batteries. Remove batteries if not using the remote control for long periods to prevent leakage.
Connections IMPORTANT. When making connections ensure the STB is disconnected from the DC supply input, and that the appliance being connected is also disconnected from the mains supply. ANTENNA INPUT. RF input from TV aerial or cable source.( 1 m/V @ 75 ) typical. RF LOOP THROUGH. RF Loop through to other apparatus (TV) ETHERNET. Input from Internet. (Firmware upgrades only) Not for general use HDMI OUTPUT. Connects to HD Display (TV) SCART. Audio /Video output. (General quality). OPTICAL AUDIO.
TV Loop Through. Connect to Aerial input of TV, Female to Male lead. (not supplied) Ethernet Connection. This connection is used ONLY for Service Technician Upgrade use. DO NOT CONNECT TO ANY ETHERNET CONNECTION Digital Audio (Optical Connection). (not supplied) Connect to a suitable Audio Amplifier Power On - Off After plugging the Mains Adaptor and connecting to the Mains supply, a Red light will be seen on the front panel (Standby Mode). Wait a few moments (60 seconds) while the box is initialised.
First Time Installation IMPORTANT: Ensure that the aerial is connected before switching on the set top box for the first installation. • When the set-top-box is operated for the first time, installation wizard will guide you through the process.
Volume Up / Down • You can increase or decrease the volume by using V+ / V- buttons. • To exit from a menu screen, you can press MENU button. • The following items are located in the main menu screen: • The volume level selected will remain set, even when the receiver is turned off and on again, until you change volume again. • The audio volume adjustment for the receiver is independent of the volume control on your TV set.
• If the selected channel is password protected, parental lock password will be asked. If the correct code is entered, selected channel can be watched. Operating the Channel List • Press “ ”/“ ” button to select the channel that will be processed. • Press “ ”/“ ” button to select a function on Channel List menu. • Use P+/P- buttons to move page up or down. • Press BLUE button to view filtering options. current character, i.e., ‘b’ character becomes ‘a’ by pressing “ ” and ‘c’ by pressing “ ”.
Viewing Electronic Programme Guide (EPG) Event Options In EPG menu, press the OK button to enter the “Programme Options” menu. You can view the electronic programme guide (EPG) to view information about available programmes. Select Programme Guide from the main menu by using “ ”/“ ” buttons. Press OK to continue. HINT: You can also press GUIDE button to view the EPG menu. • Press “ ”/“ ” buttons to navigate through channels. • Press “ ”/“ ” buttons to navigate through the programme list.
Active channels • You can select broadcasts to be listed in the channel list. To display specific types of broadcast, you should use Active channel list setting. • Select Active Channels by using “ ”/“ ” button. • You can select a broadcast type option from the list by using “ ”/“ ” button. Available modes are: TV Only, Radio Only, Text Only, Favourites or Show All (if available). • Press the MENU button to save the recent changes and exit.
• The STB automatically powers up at 3.00 A.M. every day and searches for any new software that may be broadcast. If found, the box will download new software automatically. This operation will normally take approximately 30 minutes. • You can enable or disable automatic upgrade by setting Automatic Scanning option. • You can manually search for new software by selecting Scan for upgrade. • To upgrade software via USB, you can use USB Upgrade setting.
• In order for the ethernet host to work correctly with your internet connection it needs to have a unique IP address. In most cases all of the parameters can be provided by the DHCP server in their router. In this case you should use the “Dynamic” option. • In the unlikely event that you dou not have a DHCP server in your router or if you prefer to assign your own IP address, then the “Static” option can be used. You will need to enter a unique IP address along with the default gateway and DNS server.
• In both manual and auto search, any existing channel in the database is not re-stored to avoid duplicates of that channel. First Time Installation • If you want to load default settings of your set-topbox, you can perform first time installation. • Select First Time Installation by using “ ” or “ ” button and press OK button. • The following message, asking you whether or not to delete all channels and settings, will be displayed.
Trouble Shooting Guide No Red or Blue panel light lit. Check DC Mains adaptor is connected and power is turned on. TV Shows no picture or sound. The STB output may not have been selected by the TV. Check your TV user guide. If using HDMI, select HDMI Input on the TV. Otherwise use the SCART connection and select SCART. If you are still having difficulty please call the Technical help line. Ring 0845 293 7698 (Normal rates apply). Opening hours Mon-Fri 8 am – 8pm. Sat 9 am – 4pm.
General Characteristics Supply Voltage for set-top box: 12 V DC Supply Voltage for DC Adaptor : 220 - 240 V AC ~ 50Hz Input Frequency 470Mhz-862Mhz Maximum Power consumption 15 W Typical Power consumption 8W Standby Low Power Consumption <1 W USB (optional) Current Limit 500mA Operating temperature 5ºC to +40ºC Storage temperature -20ºC to +70ºC Humidity 25 to 75 % rel Physical dimensions 295 x 170 x 40 mm Weight 900 g Hardware Configuration Main Processor MPEG Decoder NEC EMMA3SL/H
Audio Output 2 Vrms, 0 dBfs / Z = 10 kohm Digital Audio Output Optical SPDIF A / V & Data In / Out Scart TV scart RGB Video Output TV scart CVBS Video Output TV scart Analog Audio Output TV scart Digital Audio Output Optical output HDMI Output HDMI USB Input USB 2.0 High Speed (Optional) (For service use only.) NOTE: The USB port is used for software upgrading only. USB connector does not have any other functions such as playing audio or picture files.
