User's Manual

User Manual
Gamepad S2
https://www.aksys.co.kr
CONTROLLER BUTTONS
Start
X
Y
A
B
X B Button
A
Y
Select
D-Pad
L-Stick(3D)
R-Stick(3D)
RT
RB
LT
USB Micro B
LB
BACK HOME
MENU
Product : Gamepad S2
Connectivity : Bluetooth 4.1
Frequency Band : 2400 ~ 2483MHz
Output Power : Class 2
Transmission Range : 7~10 M
Supported Profiles : HID
Operating Time : Max 8h
Charging Time : 1h
Size : 153 mm (W) x 110 mm (L) x 58 mm (H)
Weight : 200 g
CONNECTIBLE DEVICE
Android Smartphone
Android TV Set-top Box
Usage of Android Smartphone and Android TV
Set-top Box
Press button for 3 second
1
Press SELECT + START button for 5 seconds
when 4 LEDs are lit.
2
When All 4 LEDs flash quickly, search for
Bluetooth device on your Android phone
or Android TV.
3
TECHNICAL SPECIFICATIONS
E. info@aksys.co.kr
T. +82-70-7010-7025
F. +82-70-7159-2177
https://www.aksys.co.kr
에이케이시스 (주)
Connect with ‘Gamepad S2 XXXX’.
(XXXX is an arbitrary alphanumeric number)
4
Gamepad S2 XXXX
You can use Gamepad S2 when 1st LED
lights up
5
Press and hold button to turn
on/off.
6
Charge the battery by connecting the supplied
charging cable to a computer or USB power
charging device (5W).
When charging begins, the LEDs will flash slowly.
When charging is complete, the LEDs won’t flash.
If the LED flashes continuously while in use,
Gamepad S2 needs to get recharged.
※ When repair service is needed, this w
arranty card, which shows the date o
f purchase, must be provided.
1. The free warranty for this product is
covered as described in this product
warranty.
2. Since the warranty period is calculat
ed from the date of purchase, the pu
rchase date must be stated.
: The warranty period is calculated ba
sed on the purchase receipt or purch
ase statement. If there is no proof of
purchase, the standard for resolving
the consumer dispute can be applied
based on the production date.
3. Quality assurance product range is lim
ited to basic components such as Gam
epad S2 . Any damage that occurs
under normal use within the warranty
period is free of charge, and repair costs
must be paid by the customer in the
event of failure or damage caused by
user's negligence, even if the warranty
period has expired or is within the
warranty period.
4. If you use this home product as a bu
siness purpose or means, or use it in
an unusual environment, the warran
ty period will be shortened to 50%.
Check out this manual before using Gamepad S2.
Charge Gamepad S2 fully before using it for the
first time.
BEFORE USE
CONTENTS
Gamepad S2
Charging Cable
Bracket
SHAKS
User Manual
Phone No of A/S : +82-70-7542-6699
Model Name : Gamepad S2
Purchase Date :
Product warranty Period:1 year from
the date of purchase
Product Warranty
Address of A/S:
A-706, 53, Seonggogae-ro, Uiwang-si,
Gyeonggi-do, Republic of Korea
5. This warranty cannot be reissued.
6. In the case of supply under a separat
e agreement, the warranty shall be a
pplied in accordance with the main
contract.
BATTERY CHARGE
5W
< Bluetooth
Gamepad S2
1 2
Gamepad S2
3 54 6
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two cond
itions:
1)This device may not cause harmful interference
2)This device must accept any interference re
ceived, including interference that may cau
se undesired Operation.
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate
radio frequency energy and, if not installed and
used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation.
If this equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment off and
on, the user is encouraged to try to correct the
interference by one or more of the following
Measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment
and receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV
technician for help.
Caution : Any changes or modifications not
expressly approved by the party responsible
for compliance could void the user's authority
to operate the equipment.
FCC Statement
Gamepad S2 Gamepad S2 Gamepad S2 Gamepad S2

Summary of content (1 pages)