Technical Specifications
CONCRETE / MASONRY
2025 Centre Pointe Blvd, Suite 300, Mendota Heights, MN 55120 | P 651.688.9116 | F 651.688.9164 | www.tccmaterials.com
Concrete and masonry maintenance product
©AKONA MANUFACTURING, LLC, A TCC MATERIALS COMPANY • June 2016 • Version 3.0
RESTORATION CLEANER
MIXING
Shake Concrete/Masonry Restoration
Cleaner bottle to ensure a uniform
solution before application.
APPLICATION
Always wet surface just prior to
application. Apply Concrete/Masonry
Restoration Cleaner with a non-metallic
sprayer or watering can. Let the cleaner
stand for 3-5 minutes. Scrub area with
bristle brush as necessary. Do not allow
product to dry on surface. Rinse
thoroughly with clean water. If necessary,
repeat process to achieve desired result.
On larger areas, work small sections at a
time.
CLEAN UP
Typically water will satisfactorily clean
tools after using Concrete/Masonry
Restoration Cleaner.
Proper application and installation of all
AKONA products are the responsibility of
the end user.
WARNING
Always read the product SDS and
cautionary statements on product
container prior to application. Wear proper
protective gear as advised on the label
and/or SDS. Wash hands thoroughly with
warm, soapy water after handling or
before eating. Do not take internally.
KEEP OUT OF REACH OF CHILDREN
WARRANTY
Seller warrants that its product will
conform to and perform in accordance
with the product specifications. The
foregoing warranty is in lieu of all other
warranties, expressed or implied,
including, but not limited to those
concerning merchantability and fitness for
a particular purpose. Because of the
difficulty in ascertaining and measuring
damages hereunder, it is agreed that,
Seller’s liability to the Buyer shall not
exceed the total amount billed and billable
to the Buyer for the product hereunder.
PRODUCT DESCRIPTION
Akona
®
Concrete / Masonry Restoration
Cleaner is a mild, acidic product that
dissolves and removes efflorescence
(white mineral deposits) and rust stains
from concrete surfaces, masonry units,
pavers, brick, etc. This product is
recommended to be used before applying
a sealer to the surface of concrete or
masonry. This cleaning enables the sealer
to penetrate and seal more effectively.
Concrete / Masonry Restoration Cleaner
may be used to prepare the surface of
concrete or masonry prior to using Akona
Repair Products.
WHERE TO USE
Pavers
Brick
Masonry
Concrete
ADVANTAGES
Cleans and restores
Dissolves mineral deposits
Surface preparation product
Ready to use
AVAILABLE SIZE
1 gal. (3.8 L) bottle (BOM #102652)
COVERAGE
150 - 250 sq. ft. (13.9-23 m
2
) per gallon
SURFACE PREPARATION
Read all directions before starting work.
Always remove all loose and unsound
materials. Protect surrounding vegetation
or metal equipment from possible
damage. Wear eye protection and rubber
gloves when applying restoration
products. For removing oil or other stains,
it is advisable to use a concrete cleaner
and degreaser prior to using this product.
BEFORE
AFTER
Helpful Items:
WARNING: INJURIOUS TO EYES
KEEP OUT OF REACH OF CHILDREN
KEEP FROM FREEZING