User Guide

ManualsBrandsAKIA SCREENS ManualsElectronics120 inch Fixed Frame Projector Screen Wall Mount 16:9 8K 4K Ultra HD 3D Ready Black 120" Projection Screen for Indoor Movie Video Home Theater Cinema Office AK-FF120WH2

Table Of Contents

FIXED FRAME
Thank you for choosing the Akia™ Fixed Frame projection screen! Congratulations on your new Akia Fixed Frame purchase! Please read through this user guide before utilizing the screen. Correct usage and maintenance will ensure a long product life.
Care & Use Instructions
Dust, dirt and scratches on the projection surface will affect the picture quality, please take note of the points below to prevent that from occurring:
1. Do not touch the projection surface with your hands
2. Do not write or draw on the projection surface
3. Do not use fingers or sharp objects to point on the projection surface; this will damage the screen material.
4. Use a soft-damp cloth to clean the projection surface; do not use chemical cleaning agents or alcohol.
5. Use clean water when dampening the cleaning cloth and do not rub against the material to clean it.

092118-BR www.akiascreens.com

FIXED FRAME

Projection Screen Series

User’s Guide

Thank you for choosing the Akia™ Fixed Frame projection screen! Congratulations on your new Akia Fixed Frame purchase! Please

read through this user guide before utilizing the screen. Correct usage and maintenance will ensure a long product life.

Care & Use Instructions

Dust, dirt and scratches on the projection surface will affect the picture quality, please take note of the points below to prevent that

from occurring:

1. Do not touch the projection surface with your hands

2. Do not write or draw on the projection surface

3. Do not use fingers or sharp objects to point on the projection surface; this will damage the screen material.

4. Use a soft-damp cloth to clean the projection surface; do not use chemical cleaning agents or alcohol.

5. Use clean water when dampening the cleaning cloth and do not rub against the material to clean it.

Frame Parts List

A. Vertical Frame x 2pcs

B. ½ Horizontal Frame x 4 pcs

C. ½ Horizontal Frame x 2pcs

Hardware Parts List

C+B

B+C

Summary of content (5 pages)

PAGE 1
FIXED FRAME Projection Screen Series User’s Guide Thank you for choosing the Akia™ Fixed Frame projection screen! Congratulations on your new Akia Fixed Frame purchase! Please read through this user guide before utilizing the screen. Correct usage and maintenance will ensure a long product life. Care & Use Instructions Dust, dirt and scratches on the projection surface will affect the picture quality, please take note of the points below to prevent that from occurring: 1.
PAGE 2
Item Parts List 100” Screen 110” Screen 120” Screen 135” Screen 150” Screen A. Center Joints 2 2 2 2 2 B. Springs 38 42 44 50 54 C. Elbow Joints 8 8 8 8 8 D. Large Hex Screw/Small Hex Screw 4/32 4/32 4/32 4/32 4/32 E. Pull Hook 1 1 1 1 1 F. Wall Bracket 2 2 2 2 2 G. Allen Key 2 2 2 2 2 H. Wood Screws/Anchors 4/4 4/4 4/4 4/4 4/4 I. Tension Rods 6 6 6 6 6 J. Center Support Bar 1 1 1 1 1 Note: Additional spare parts may be included.
PAGE 3
To prevent permanent damage to the screen material, be sure your hands are clean for the next step. Step 5. Carefully unroll the screen material face-down on, top of the assembled frame, from one side of the frame to the other side as shown below. Back Side Step 6. Insert the four horizontal and two vertical Tension Rods (I) into the corresponding sides of the screen material, while keeping the material laying flat.
PAGE 4
Step 9. Two people are suggested for this step. Place the Center Support Bar (J) into the top groove on the back of the frame (not the one where the spring inserts) at the approximate center point of the frame. Carefully pull the bottom horizontal frame outward and place the Center Support Bar (J) at the approximate center point of the frame. Carefully release the frame once the bar is centered. (See illustrations below for details.
PAGE 5
Installation Step 11. Measure the overall length and height of the frame and drill holes for the Brackets (F). Line up the wall brackets with the drilled holes on the installation location and screw them in using a Phillips screwdriver. If not installing into a structural wood stud, use a hollow wall Anchor (H), then screw in the M5x50 Screws (H) with a screwdriver. Make sure the brackets are leveled. Step 12.