Instruction manual Thank you for purchasing our voice recorder. Customer satisfaction is our priority. If you have questions or problems, please feel free to contact to us.
Package Content Main unit (L82) A USB Cable 2 Pen Refills One Earphone One instruction manual 1
Notice before use Please do not 1:Do not scratch, rotate the pen, speak too close to the microphone , or write while recording, as it would capture noise. 2:If the sound is loud, do not record close to the sound source. 3:Do not delete the file unless the file has a backup. 4:Do not press any buttons while connected to the computer. 5:Do not use voice-activated features unless necessary. It may not record some low decibel voice you want recorded.
Basic operation of the pen 1 2 3 4 1 2 3 4 Power button:Record,Play,Save,Stop Battery charge indicator light Pen clip Refill 3
0% 75% 2 1 2 3 4 5 3 4 25% 100% 1 VOR 5 Battery level indicator VOR activated recording switch Next / Volume + Previous / VolumeUSB / headphone interface 4
Indicator light state explanation: Power ON Red and blue lights illuminate Power OFF The red and blue lights flash simul taneously and go off. Recording Red light flashing. Playback Blue light stays on long。 Low battery The blue and red lights flash simultaneously and shut down. Charging Red light turns on while charging. Red light turns off when fully charged The remaining battery capacity The battery level indicator 25%, 50%, 75% and 100% respectively.
100% 75% 25% 50% VOR 2) connect to PC via supplied USB cable. You may also connect the enclosed cable with our voice recorder and other USB socket for charging (USB wall charger, or USB charge adapter) 25% 100% 75% 3)Charging:While charging,the indicator will flash and the indicator light has four different stages (25% 50% 75% 100% respectively) 50% RECORD VOR How to set time 1:Please connect to a PC and set the correct time first when using for the first time.
Turn on voice recorder and start recording button Feature Description Power button: Record save,Play Stop Operation explanation Press the power button to record.Then the red light will flash to indicate that recording has started Press the power button again to save the record How to play recording Twist the pen body, insert the included earphone, and press the power button to play.
How to increase or decrease volume during playback + 75% 25% 50% 100% 75% 25% 50% VOR VOR 100% - How to pause during playback:Press the tpower button to pause recording and press the power button again to continue playback. 1.In playing status 2.Press the button back, Means paused playback RECORD 75% 25% 50% 100% 75% 25% 50% VOR VOR 100% Notes: 1. If the device is paused and doesn't respond within 30 seconds, the device will automatically turn off 2.
How to delete recordings 25% 100% 50% 25% 100% 75% 50% 2)Double click “ + “ key to enter delete mode. Then double click “ + ” again to confirm deleting current file. 75% 1)Pause the file while playing.
How to connect computer 2)A removable disk named 1)Connect the pen to computer via usb cable,when “L82(D:)” will be shown in file. connected Successfully,you will see the connection icon After we successfully connect to a computer, we may delete, or transfer files in and out from the recorder like normal flash drive. L82(D:) How to Play Recordings on PC or MAC 1.For Mac users, please download the free VLC Media Player and play the recording. (Website: http://www.videolan.org/) 2.
Record Setting 1.1The indicator light is built behind the pen clip, you may need to pay attention to it Twist off the pen body, there is VOR (voice activated recording) switch inside the pen. Just push it aside according to the arrow direction, the VOR is turned on. When voice activated recording is on, the recorder will only capture loud enough voice, for too low decibel voice, it would not record 1.2Voice Activated Recording NOTICE: When voice decibel is lower than 70db, the sound will not be recorded.
Failed Connecting to a computer Here are some suggestions for fixing this problem: A.Do not swing the Micro-USB cable when connecting to a computer in case of unstable connection B.Sometimes failed connection is due to a broken Micro-USB cable or a loose USB socket Contact seller for a new cableor connect to another USB socket, or simply reboot your computerIf the issue still exists after all the actions above,please contact us ,we will be always here to assist you.
Playback format MP3:32Kbps~384Kbps WMA: 32Kbps~192Kbps Recording sound quality 192Kbps Recording format WAV Headphone output two-channel output Headphone output 48KHz Recording sampling rate FAT32 File system -5℃~40℃ Operatingtemperature 3.5MM Micro-USB Cable Connectionmethod USB 2.0 Transferinterface 8GB:6 hours 16GB:12 hours 32GB: 24 hours Supporte dinterfaces WINDOWS XP VISTA/WINDOWS 10 Play time About 5 hours Product weight 40 grams (Please refer to the real item.
questions answer questions answer questions answer questions answer 2)Can't find the recording on the recorder? This is mainly because the file was not saved properly or you cannot connect to your computer to find the recording. 1. The recorded file was not saved properly: Press the power button to start recording and save the recording 2. Connect the pen to the computer, find the removable disk, click the entire disk and select "Format"。 3)Press the power button to record, but failed. 1.
TROUBLE SHOOTING GUIDE 1) How to use the pen and replace the ink refill ? Right twist, push out pen nib and can write ; Left twist , push back nib; Continue left twist to open the pen nib , and left twist the refill to take out of it , then put in a new refill. 2) How to charge the device? Unscrew the two halves of pen and you will see buttons and 3.5 mm earphone jack. Plug in the enclosed 3.
8) Turn on / Turn off Voice Activated Function The VOR switch is set to the direction of the arrow , red and orange indicator alternating flashing , VOR mode turned on ; Switch back , turn off the VOR mode. You can choose to turn on / turn off Voice Activated as your needs. Important Notice for Using This Device DOs - When you received the recorder, we recommend that you push the power button to turn on the device,plug in the earphone and listen to a test file on the device to check sound levels .