Quickstart Guide English ( 3 – 8 ) Guía de inicio rápido Español ( 9 – 15 ) Guide d’utilisation rapide Français ( 16 – 22 ) Guida rapida Italiano ( 23 – 29 ) Schnellstart-Anleitung Deutsch ( 30 – 36 ) Appendix English ( 38 )
Quickstart Guide (English) Introduction Features: • Standalone MPC—no computer required • 7” (177 mm) full-color multi-touch display • Also acts as a control surface for MPC software • Full-size MIDI input and output Box Contents MPC One Power Adapter USB Cable • • • • 2 GB of user storage, 2 GB pre-installed content included 2 GB of RAM Full-size SD card slot USB-A 2.
Features Top Panel 12 13 1 7 6 8 9 15 16 17 18 19 30 14 5 10 2 3 4 31 20 21 22 23 24 11 25 26 27 28 29 Navigation & Data Entry Controls 1. Display: This full-color multi-touch display shows information relevant to MPC One’s current operation. Touch the display (and use the hardware controls) to control the MPC interface. See Operation to learn how to use some basic functions. Important: Remember to remove the protective film from the MPC One touchscreen! 2.
Pad & Q-Link Controls 6. Pads: Use these pads to trigger drum hits or other samples. The pads are velocity-sensitive and pressure-sensitive, which makes them very responsive and intuitive to play. The pads will light up different colors, depending on how hard you play them (ranging from yellow at a low velocity to red at the highest velocity). You can also customize their colors. 7. Pad Bank Buttons: Press any of these buttons to access Pad Banks A–D.
18. Track Mute / Pad Mute: Press this button to view Track Mute Mode where you can easily mute tracks within a sequence or set mute groups for each track. Press and hold Shift and press this button to view Pad Mute Mode where you can easily mute pads within a program or set mute groups for each pad within a program. 19. Next Seq / XYFX: Press this button to view Next Sequence Mode where you can trigger different sequences simply by playing the pads.
Front Panel 1. SD Card Slot: Insert a standard SD, SDHC or SDXC card into this slot to access its files directly using MPC One. 1 2 2. Phones (1/8” / 3.5 mm): Connect standard 1/8” (3.5 mm) stereo headphones to this output. Rear Panel 9 10 8 7 12 11 13 14 2 5 4 6 1 3 1. Power Input: Use the included power adapter to connect MPC One to a power outlet. 2. Power Adapter Restraint: Secure the power adapter cable to this restraint to prevent it from accidentally unplugging. 3.
Operation Here is some general information about how to use the MPC One display: x2 Tap a button or option to select it. Use the Double-tap a button to access advanced data dial or –/+ buttons to change its setting editing options. In some cases, this will show a numeric keypad that you can use to enter a or value value (an alternative to the data dial or –/+ buttons). Tap the upper-left part of the display to return to the previous view.