User Manual Please read user manual carefully before using
Important Notes 1)Please keep the device away from high temperature (50 ℃ above), low temperature (-10 ℃ ) 2)Do not severely hit the equipment, and do not put heavy objects on the equipment. 3)Do not use accessories not provided by the manufacturer. 4)Keep away from benzene, diluents or other chemicals. 5)Keep away from water. 6)Non-professionals are not allowed to open the back cover of equipment for self-maintenance. 7)If you do not use the machine for a long time, please unplug the power.
FCC WARNING: Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Packaging Content (21.
Packaging Content (10.
Installation for 10.1 inch wall mount 1.Drill holes on the wall of the 2.Insert the rubber plug 3.Use screws to fix the correct position into the hole in the wall wall bracket on the wall 4. Align the four holes and 5. The installation is complete. hook to the plate Installation for 10.1 inch hand sanitizer free stand 1.Take out the ground base and floor stand, fix the stand to the ground base 2.Take out the shorter floor stand strut.Place the shorter strut on the longer strut.
4. Align the four holes and 5. Put the power cable through 6. The installation is complete hook to the plate the column and lead out from the base Installation for 21.5 inch wall mount 1.Drill holes on the wall of 2.Insert the rubber plug into 3.Use screws to fix the the correct position the hole in the wall wall bracket on the wall 4.Install screws on the back 5.Put the machine onto the 6.The installation is complete of the machine.
Installation for 21.5 inch Floor Stand 1. Take out the ground base 2. Put the AC power cable 3. Fix the hanging plate and stand, and fix them with through the column and lead with screws screws from the bottom out from B at the base 4. Lock 4pcs screws on the 5. Snap the screw on the back of the machine back of the machine into 6.The installation is complete. the hole of the stand Change Pump/Nozzle 1.Remove the U-shaped 2.Upward to take out the 3.
4. Install the new nozzle 5.Put the tank back inside 6.Fix the container with a the machine U-shaped card Refill the hand sanitizer You can refill the tank with hand sanitizer. you need to select the right nozzle according to the type of the hand sanitizer , such as: gel/liquid/foam,Do not add liquid with impurities. Otherwise, or otherwise the nozzle will be blocked. 1. Take out the U-plate 2.Upward to take out the 6.Fix the container with a tank . U-shaped card 4. Add hand sanitizer to 5.
Power On 1)Connect the AC cable/power adapter 2)Press the switch to power on the machine 3)The start up icon will be displayed on the screen. 4)Wait for about 30 seconds and enter into main interface. Power Off 1)Shutdown: press the power switch to off 2)Remove the AC cable/power adapter Access to The Application 1) In the main menu， click icon to go to APPS menu screen.
Wireless Internet 1)Enter into the settings and turn on the Wlan, connect to the available networks. 2)Enter into the APPS and click the ‘browser’, then you will get into the google homepage. 3)You can type in the url at the top of the browser, and access to the interesting news and videos. Install APK 1) Copy the fle in apk format to the device or usb flash drive. 2) Click Application program and find the APK ,open it and install.
Uninstall APK Follow below steps to uninstall the APK Setting-APPS¬ifications-See all 18 apps-choose the application uninstall Factory Reset If your device is infected with a virus or accidentally works by installing a third-party application,you can remove all data from the device by resetting the tablet.
