User Guide

the DEL button at device's right side, quickly delete the
selected recording, or delete All recordings.
Play a Recording: by pressing PLAY button turn on the
device, press REW/FF button to choose the recording you
wish to hear -> press PLAY.
Play Next / Previous Recording: press the REW/FF button.
Fast Forward / Rewind: press and hold the REW/FF button.
Important Notice for Using This Device
DOs
●Listen to a test file on the device to check sound levels.
●Backup data as frequently as possible.
●Charge the device via its USB cable to a computer or wall
charger (charger input less than 5V 1A).
●When battery is low (battery bar empty), save recordings
and recharge immediately.
●The device supports charging and recording at the same
time.
●Remember to hit STOP and save your recording each time.
●Device won't make any noise during recording. It will flash
the Record LED light (this function can be turned off).
●Keep this booklet for future reference.
●
For any issues, problems, or questions, contact us
[e-mail]
9
Confirm the package contains an authentic, new device from
The original package comes film wrapped and has bar code
information.
Package List
1 x E36 Device
1 x Earphone
1 x LINE IN Cable
1 x External Microphone
1 x USB Cable (for data transfer and
charging)
1 x VIP Card
Product Warranty
1 year warranty unless registered
with VIP.
2
3
4
1. Check the TF card direction, correct
direction like picture shows
2. insert the TF card softly, push it in, the
card will locked in the device
3. Push the TF card, the card will jump out
5
UP/DOWN (+/-): Selects Menu Options. Adjust speaker
volume when playback.
Speaker: Device has a built-in speaker. You can hear the
playback without earphones.
REW/FF : Selects left/right, hold it for rewind / fast forward
when playback
Learn how to operate the buttons in the product sketch.
Built-in Mic: Captures the voice and records. Do not click
on buttons when device is recording.
Earphone: You may plug in earphones to hear the
playback.
LINE-IN: Connect for LINE IN cable / external microphone
USB: For charging or to download recordings to a
compute
r.
PLAY/PAUSE:
Play recordings or turn on/off the device
REC: Button for recording.
STOP: Save recording, stop playback.
M: Menu options. Use up/down to select, use PLAY to
confirm. Press Stop to return to main menu
Product Sketch
NO.
Function
1
2
3
4
5
6
7
Battery Bar (when battery bar is empty,
battery needs recharging)
Length of Recording in minutes/seconds
Recording format & bit rate
Remaining Recording Time (remaining
capacity)
Recording Status
L / R Channel meter
Total Recording File Count
6
7
8
Quick Start Guide
QUICK Delete: by pressing PLAY button turn on the device,
press REW/FF button to select a recording, and then press
Turn ON device: Press PLAY button for two seconds to turn
on the device.
Recording: press REC button to begin recording.
Save Recording: press STOP button to save recording
Delete Recording: press Menu button. Select -> Delete ->
select Delete One. This deletes a single recording. To
delete all files,Use +/- button to choose Delete All -> Select
Yes -> Use PLAY button to confirm your choice.
●Contact customer service with Order ID or System
Firmware Version Information, or Bar Code on the package
for a more effective reply.
●Register for VIP service within 30 days to receive
effective customer service and extend your recorder's
warranty to 18months.
DON'Ts
●Do not scratch the recorder body.
●If typing or writing near the device while record function is
on, it will capture the noise.
●Do not format the device unless the files have been backed
up.
●Do not delete a file unless the file has been backed up.
●Do not press any buttons when device is connected to a
computer.
●Do not use non-original micro USB cable to transfer data
from device to computer. Not all micro USB cables support
data transfer.
●Do not use the Voice Activated Function unless needed. It
may not record some low decibel voice you want recorded.
●Do not pause the device for a long time, as the device will
automatically shut down when there is no operation such as
playing or recording.
10
Operational Explanations:
Hit: a short press of the button.
Press and hold: press the button a few seconds until the
screen shows the information.
These instructions will say “hit” or “press and hold.”
Basic Operation Guide
1)Charging the device
Use the USB cable provided. Connect to a computer, USB
socket, or USB Adapter. The battery can be fully charged in 3
hours, single full charge can work up to 70 hours.
2) Download file to computer
Use the USB cable provided to connect to your computer.
Find the file (E36) on your computer. Drag & Drop or Copy
and Paste the recordings from the recorder file to your
computer and share with friends.
11
3) Turn on the recorder
Press PLAY button to turn
ON/OFF the recording
device.
4) Recording
Hit REC button to begin recording.
Press STOP to automatically save
recording.
12
5) Pause / Resume Recording
During recording, hit PLAY button
to pause recording.
Hit PLAY button again to resume
recording.
6) Play Recording
Once you have saved a recording,
hit PLAY button and play back what
was just recorded.
7) Adjust Speaker Volume
During playback, use + / - to adjust
speaker volume.
During playback, press and hold FF
to use fast forward.
During playback, press and hold
REW to rewind.
8) Fast Forward / Rewind
13
9) Previous / Next
Tap REW or FF to select, move to
previous / next recording file (or
music track).
10) Play Music (use as MP3 Player)
Attach device to computer. Transfer
music file from computer to recorder.
Detach device from computer and
turn on.
Press down MENU button and switch
to music folder.
Note: the songs do not put inside the
RECORD folder, you could create a
new folder for it.
11) Delete Recording
Turn on the device by pressing Play.
Press REW/FF to select a file to
delete -> press DEL button, directly
enter delete option
14
Delete
Delete All
Delete one
yes
2017-0302
No
NOTE: When turning on the device, we can press REW / FF
button to select file to Delete, in default, it reads the latest
file, so if we will directly go to delete option, it will delete the
latest file.
Menu Options
The PLAY button works as OK/Confirm in menu options
1.Save Position
Press Play (turn on device)-> tap M -> Save Position -> Hit
PLAY Use +/- to select save position, TF (need insert TF
card), Flash (built-in storage)
Note: press PLAY to confirm selection, if we didn't insert TF
card correctly, when selected at TF, it will show “removed TF
card”
2.Record Settings
Press Play (turn on device) -> hit M -> use +/- to Record
Settings -> hit PLAY
15
.1Recordings library
Shows all files recorded on device.
.2Record Format
We could choose to record at WAV or MP3 format
.3Set rec bit rate
Below the bit rate chat
Format
WAV
MP3
256kpbs
32kpbs
Bit Rate
512kpbs
64kpbs
1536kpbs
128kpbs
2.4AVR Mode
AVR Switch: turn on / off Activated Voice Record Mode
AVR Level: select the voice activated recorder sensitivity
level
At AVR mode, we still need to press STOP to save
recordings when we complete a recording task.
Voice Activated Sensitive Level
From Level 1 to Level 5: Level 1 only picks up voice or sound
above 70db, a very loud sound. Level 5 is very sensitive, so
any quiet sound will be recorded. (i.e. normal
environmental noise will activate recording).
Note: do not turn on this function for important lectures or
meetings. It may skip or lose some very important se
ntences
16
at low decibels. Use regular on/record/stop for meetings.
2.5 Record LED
ON: default. LED indicator light is ON. OFF: turn off the LED
indicator light.
2.6 Noise Cancellation
OFF: default. When it is ON, it could help to reduce noise
interference.
Note: when noise cancellation is ON, it will record at mono
2.7 Record Monitor
OFF: default. When it is ON, use earphones to hear what it is
recording.
3.Play Settings
Press Play (turn on device)-> tap M -> use +/- to Play Setting
-> hit PLAY
Use +/- to select Repeat.
Repeat one: repeats single file again and again.
Repeat all: repeats al
l files in directory from A-Z again and
again.
Shuffle: plays back files in random order. To stop shuffle,
select at repeat one or repeat all
4.Variable Playback Speed
Press Play (turn on device) -> hit M -> use +/- to Variable
Playback Speed -> hit PLAY
17
18
Time settings:
Set time format: we can set at 12/24
Set Time: press +/- to adjust hour, minute. Press REW/FF to
move to next
Press PLAY to confirm and finish setting
Date Settings:
Set date format: we can set at 3 different date display style
Set date: Press +/- to adjust year, month, or day. Press
REW/FF to move to next.
Press M to confirm and save setting.
Password Set:
Password switch: OFF default. When turn it on, we need to
set password for the device Password set: input a 6 digits
password. Press +/- to set the numbers. Press REW/FF to
Use +/- to adjust playback speed from -8 to +8; the normal
speed is 0, r
emember to press PLAY confirm settings
5.System Settings
Press Play (turn on device) -> hit M -> use +/- to System Set -
> hit PLAY
Language:
English default. We could select for other
language of the device. If, unfortunately, the device is set to
the wrong language, please contact customer service.
[e-mail]
Date and time:
move to next.
Note
1.If forgot password, please enter 18 18 18, and then hold
STOP button more than 3 seconds to reset the device
2.If password function is ON, when connect to computer, we
need to input correct password, otherwise, it will fail connect
to computer
Player Information:
Device shows the firmware version and the release date.
Disk space:
Device shows the free space and total space.
Format Device:
This will format the disk and erase all data on the device,
so remember to back up important files before doing.
Select Yes, press PLAY confirm. Device will start to reformat
and erase all data. Wait until the device reboots and
completes the process.
Note:
Do not turn off power when formatting device. If,
unfortunately, the devise is mistakenly cut off, it will show as
disk error.
To correct disk error.
Push down the power button from ON to OFF position.
Connect the device to a Windows computer, and format the
disk from the computer to return to normal state.
19
Note: If you are using a MAC computer, please contact our
customer support. Reformatting on a MAC computer needs
different options.
Factory Setting:
Restores to factory default. Very helpful if confusion arises
when creating settings.
Select Yes, press PLAY to confirm. Device will start to restore
factory settings.
20
Note: This form shows the maximum recording file time that
can be stored in the device, not the battery time, Device
capacity is subject to the entity.
Recording Parameter
WAV
Mp3
Recording
Quality
1536kpbs
512kpbs
256kpbs
128kpbs
64kpbs
32kpbs
145 hours
290 hours
580 hours
290 hours
580 hours
1160 hours
580 hours
1160 hours
2320 hours
8GB
16GB 32GB
12 hours
24 hours
48 hours
Recording Parameter
Product
Dimension
Screen Size
USB Socket
Charging
Record Bit Rate
Support System
Earphone Output
Memory
Battery
Music Playback
Battery Time
Max Recording
Battery Time
Support Music
Format
3.82 X 1.26 X 0.51 inch (95X31X12MM)
128 x 64 LCD
USB 2.0 High Speed (Charging and
Data Transfer)
Input < 1A 5V
1536kpbs, 512kpbs, 256kpbs, 128kpbs,
64kpbs, 32kpbs
Windows98 and later version, XP,
Windows 7 /8 /10
Max 10mW+ (30Ohm), Freq 20Hz - 20KHz,
S/N ratio > 90db, Distortion factor 0.05%
8G / 16G / 32G (Subject to the device)
3.7V 800mAH Lion Polymer
12 hours (single full charged with
earbud, screensaver)
Full charged, recording at 32kpbs could
work 47 hours
MP3 / WAV / FLAC / APE / OGG / WMA
21
正面
反面
展开尺寸:525* 300m m ,折叠尺寸：１０５m m * 1 5 0 m m
双面两色印刷
To Ensure Product Warranty
Headphone
jack
Lock
Button
Reset
Menu
Delete
/A-B
Lanyard
hole
Line in jack
USB port
TF card
socket
36 hours 72 hours 144 hours
72 hours 144 hours 288 hours
RECORD
17-04-24-06-33-55.
17-04-24-06-33-55.
17-04-24-06-33-55.
17-04-24-06-33-55.
(3)
(4)
(8)
(5-6)
(9-10)
(11)
(11)
V2
How to Insert TF Card
Built-in Mic
Vol+ / Up
Stop/
Return/Save
Play / Pause
/ ON/OFF
Rewind /
Previous
VOL-/Down
Screen
Record
Fast
Forward
/ Next
Speaker
RESET: when device in error status, push RESET button quick
to fix it
2
2
2
1) Device Frozen
When device was frozen, we can push the RESET button to
reset the device, it will not delete files on device
2) Restore to Factory Setting
Restore to factory setting, very helpful if confusions arises when
creating settings
3) Format Device
Format device, it will delete all data on the device. Device also
can format on Windows computer or MAC computer. If format on
MAC computer, Contact customer service support-us@evis-
tr.com to get tutorials
4) Forgot Password
If forgot password, enter 18 18 18 and hold the STOP button 3
seconds.
5) Failed connect to computer
Need using the original USB cable. If failed connecting to
computer, we could try below solutions or contact customer
service [e-mail]
A. If set password, need enter correct password when connect-
ing to computer
B. If cable damaged, try with android phone cable
C. Computer socket loose, try with another socket
D. Computer didn’t connect to internet, for some computer, they
need use internet to recognize the device, so just reboot
computer and connect device again
E. Don’t press buttons when connecting to computer, in case of
entering charging only mode
F. Don’t interrupt connection unexpectedly, in case of file lost or
damaged
Frequently Asked Question
22
E36 User Manual
Aiworth.