Compact Disc Stereo System XR-X7 U C For assistance and information (United States and Puerto Rico) 8B-CL2-903-21 010620CYK-H-M OPERATING INSTRUCTIONS En (English) MANUAL DE INSTRUCCIONES E (Español) MODE D'EMPLOI F (Français)
PRECAUTIONS WARNING To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN En “CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Outdoor Antenna 1 Power lines — When connecting an outdoor antenna, make sure it is located away from power lines. 2 Outdoor antenna grounding — Be sure the antenna system is properly grounded to provide protection against unexpected voltage surges or static electricity build-up.
PREPARATIONS Connection Plug in the AC power cord to the AC power outlet after all other connections are made. 1 Connect the speaker cords to the speakers. Connect the amber cords to the + terminals and the silver cords to the – terminals. En 3 Connect the supplied antennas. Connect the FM antenna to the FM 75 Ω terminals and the AM antenna to the AM LOOP terminals. FM antenna AM antenna 4 Connect the AC power cord to an AC power outlet.
PARTS AND CONTROLS Main unit: rear 1 4 2 3 5 67 1 DIGITAL OUT (OPTICAL) jack CD digital sound signals can be output through this jack. Use an optical cable to connect digital audio equipment. Remove the dust cap from the DIGITAL OUT (OPTICAL) jack. Then connect an optical cable plug to the DIGITAL OUT (OPTICAL) jack. 2 AM LOOP and FM 75 Ω terminals Connect the supplied AM and FM antennas. 3 SPEAKERS3 terminals Connect the supplied speakers using the supplied speaker cords.
Main unit: front 3 1 2 TUNER/BAND Selects radio function and the radio band. 2 4 5 3 VIDEO/AUX Selects the function of external equipment connected to the VIDEO/AUX IN jacks. En 4 CD Selects CD function. 5 zOPEN/CLOSE Opens or closes the disc compartment. 6 7 9 ! 8 0 @ $ # 6 PHONES jack Plug in optional headphones set with a stereo mini plug (ø3.5 mm, 1/8 in.). Speaker output is canceled. 7 POWER 6STANDBY/ON Switches the unit on and off (standby). 1 aSET CD: pauses playback.
Remote control 2 The numbered buttons take on these functions when pressed with SHIFT held down: 1,2 3 4 7 8 9 RANDOM/REPEAT Selects random or repeat CD playback mode. PROGRAM Selects programmed CD playback mode. DISPLAY 5 6 0 TIMER Selects timer playback setting mode. SLEEP Selects sleep-timer setting mode. Buttons with the same or similar names on the main unit basically have the same function. 1 0–9, +10 CD: selects a track of the specified number.
ADJUSTMENTS BEFORE OPERATION DEMO TUNER/BAND VIDEO/AUX f,g CD If the clock has not been set, "DEMO" appears on the display when the unit is turned off. CLOCK En SHIFT f,g aSET POWER TUNER/BAND, AUX, CD To deactivate the DEMO While "DEMO" is displayed, press DEMO/ECO. The clock flashes. For setting the clock, see page 9. ENTER ECO mode Reduces power consumption with the following operations.
Changing the display color Select color mode Setting the clock You can preset up to 3 of your favorite colors you adjusted. The display color can be changed to 12 different colors and 3 adjusted preset colors (select color mode). You can also select 12 different colors and 3 adjusted preset colors for each function (function color mode). You can select between select color mode and function color mode. 1 Press COLOR to display "SELECT CL" while the power is on.
CD OPERATIONS cPRESET sCLEAR zOPEN/CLOSE f,g aSET CD RANDOM/ REPEAT DISPLAY En PROGRAM 0-9,+10 CD SHIFT f,g DISPLAY VOLUME/MULTI JOG This unit plays back finalized CD-R/RW discs as well as audio CDs. Playing a CD 1 Press CD to select the CD function. 2 Press z OPEN/CLOSE to open the disc compartment. Place a disc with the label side up. Then close the disc compartment. cPRESET aSET sCLEAR VOLUME (N,M) 3 Press c to start play. To stop play Press s. To pause play Press a. Press again to resume play.
Random/Repeat play Programmed play In random play mode the unit plays all the tracks in random order. In repeat play mode it plays repeatedly all the tracks or the track being played. You can select random and repeat all play at the same time. Plays back up to 30 selected tracks in programmed order. 1 Hold down SHIFT and press RANDOM/REPEAT repeatedly to select one of the following modes: 2 Press the numbered buttons on the remote control to program a track.
RADIO OPERATIONS Tuning in preset stations 1 Select the band. cPRESET sCLEAR f,g TUNING UP/DOWN aSET TUNER/BAND 2 Press c repeatedly. 0-9,+10 En MONO TUNER TUNER/ BAND SHIFT f,g cPRESET sCLEAR aSET POWER 6STANDBY/ON With each press, the station with the succeeding preset number is tuned in. You can tune in the desired preset station directly by pressing the numbered buttons on the remote control. - To select preset number 10, press +10 and 0. - To select preset number 15, press +10 and 5.
SOUND ADJUSTMENTS T-BASS Emphasizes low frequencies for a powerful sound. On the main unit 1 Press MODE repeatedly so that "T-BASS" is displayed. T-BASS EQ 2 Within 7 seconds, turn VOLUME/MULTI JOG to select one of the three emphases levels or the off position. VOLUME (N,M) On the remote control Press T-BASS repeatedly to select one of the three emphasis levels or the off position. •If the sound becomes distorted with the T-BASS effect, cancel the effect.
TIMER OPERATIONS aSET Timer playback TUNER/BAND VIDEO/AUX f,g CD Turns on the unit at a specified time for the specified duration. Make sure the clock is set correctly. SLEEP TIMER En SHIFT f,g POWER MODE ENTER VOLUME/MULTI JOG POWER 6STANDBY/ON Sleep timer Turns off the unit automatically after a specified time. 1 Press MODE repeatedly (hold down SHIFT and press SLEEP on the remote control). "SLEEP" is displayed. 2 Press f or g repeatedly to set the sleep timer duration.
6 Adjust the volume and tone for timer playback. If the volume level is set to 21 or higher, it is automatically turned down to 20 when the unit is turned on by the timer. 7 Prepare the source. To play CD, insert a disc. To play the radio, select the band and tune in the desired station. To play external equipment connected to the VIDEO/AUX IN jacks, set an external timer for the equipment so that playback begins at the same time. 8 Press POWER 6STANDBY/ON to turn the unit off.
REFERENCE Care and maintenance Occasional care and maintenance of the unit and the software are needed to optimize the performance of your unit. En To clean the cabinet Use a soft and dry cloth. If the unit surfaces are extremely dirty, use a soft cloth lightly moistened with mild detergent solution. Do not use strong solvents such as alcohol, benzene or thinner. Care of CDs When a CD becomes dirty, wipe it from the center out with a cleaning cloth. After playing a CD, store it in its case.
GENERAL Specifications Power requirements Power consumption MAIN UNIT CX-LX7 TUNER FM tuning range FM usable sensitivity (IHF) FM antenna terminals AM tuning range AM usable sensitivity AM antenna 87.5 MHz to 108 MHz 13.2 dBf 75 ohms (unbalanced) 530 kHz to 1710 kHz (10 kHz step) 531 kHz to 1602 kHz (9 kHz step) 350 µV/m Loop antenna AMPLIFIER Power output Total harmonic distortion Input Outputs 16 W + 16 W (150 Hz - 16 kHz, THD less than 1%, 6 ohms) 20 W + 20 W (1 kHz, THD less than 10%, 6 ohms) 0.
NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
