Users Manual

Quick Start Guide
Aiwa Prodigy Air Max
Aiwa Prodigy Air Max
US: [e-mail] | 888-982-8561
Europe: [e-mail]
Aiwa Corporation
PACKING LIST DIAGRAM FINDING THE RIGHT FIT
Because fit is crucial for the enjoyment and comfort of an
earphone, the Prodigy Air Max was designed in close
consultation with audiologists. Designed not just to fit into
the ear canal with different sized silicon tips, but also to
comfortably and securely fit the Concha.
The Prodigy Air Max does this not only with interchangeable
ear tips, but also interchangeable silicon wings. The earbuds
come installed with medium sizes of both. If you find the fit is
not perfect, you may wish to remove the wing accessory and
experiment with the other included eartips, followed by
trying different sizes of wings.
The correct size wing should fill the ear’s Concha and be held
securely in place by the Antihelix and Antitragus
POWER ON
1. The earphones will automatically turn on and start
pairing when you open the charging case. If they have
been previously paired, they will reconnect with the
most recently connected device.
2. If the earphones have gone to sleep outside of the case
(after ten minutes without use) they can be turned on by
simultaneously pressing and holding the MFB of both
earbuds for 2 seconds.
POWER OFF
1. Option #1: Put the earphones back in the charging case
and close the case to turn them off.
2. Option #2: If the earphones are not in the charging case,
just press and hold the MFB of both earbuds for 5
seconds to power them off. (Music must be stopped and
calls ended to power off.)
PAIRING
1. When the charging case is opened, they will
automatically enter pairing mode. The LED light will flash
white and red.
2. From your phone’s Bluetooth menu, select “Aiwa Prodigy
Air Max.”
For convenience, the Prodigy Air Max earphones are
designed to automatically reconnect to the most
recently paired device. To pair to a new device,
disconnect the Bluetooth from the last device. The
earbuds will automatically enter pairing mode.
INCOMING CALL
1. Answer / Hang Up
• Double touch the MFB of either earbud.
2. Reject
• Press and hold the MFB of either earbud for 1 second.
DIGITAL ASSISTANT
1. Triple-touch the MFB of either earbud to initiate Google
Assistant or Siri
Miscellaneous Notes/Troubleshooting
-When you return the earbuds to the charging case the MFB
LED should illuminate (red if charging, white if fully charged)
and they should disconnect from the phone automatically. if
they do not, then either they are not well seated in the case
or the case is fully discharged.
FCC STATEMENT
Any Changes or modifications not expressly approved by
the party responsible for compliance could void the user’s
authority to operate the equipment.
This device complies with part 15 of the FCC Rules.
Operations is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits
set forth for an uncontrolled environment.
RESET
While in the charging case, simultaneously press and hold
the MFB of both earbuds for 5 seconds. When the LED light
flashes red, the device has reset and cleared the previous
device connections.
CHARGING
-The color of the LED on front of the case will show how
much charge in the case remains:
Red: less than 35% charge remaining
Pink: between 35% and 75% charged
Blue: greater than 75% charge remains
-Do not put the earbuds in the charging case when the
earbuds are wet.
MUSIC
1. Volume Up / Down
• Volume + : press and hold the MFB button of Right
earbud to turn up the volume
• Volume - : press and hold the MFB button of Left earbud
to turn down the volume
2. Next / Previous Track
• Next Track : double touch the MFB of Right earbud.
• Previous Track : double touch the MFB of Left earbud.
3. Play / Pause
• Touch the MFB of either earbud once.
Microphones
Antihelix
Antitragus