8C-CHE-932-01 CD STEREO RADIO CASSETTE RECORDER CSD-FD88 CSD-FD99 Owner’s Record The model number is located at the bottom and the serial number is located on the rear. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Aiwa dealer regarding this product. Model No. © 2003 Sony Corporation Serial No.
WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN “CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
INSTRUCTIONS Object and Liquid Entry – Never push objects of any kind into this unit through the cabinet slots as they may touch dangerous voltage points or short-circuit parts that could result in a fire or electric shock. Never spill liquid of any kind on the unit. Electric Power Power Sources – This unit should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company.
Power supply Using on batteries Open the lid of the battery compartment on the rear and insert eight R14 (size C) batteries, not supplied, as illustrated below. Then close the lid. To switch from AC power supply to battery supply, disconnect the AC cord from the AC inlet. OPE/BATT The OPE/BATT indicator lights up while the power is on. R14 (C) Using on AC house current Connect the AC cord as illustrated below.
Remote control Specifications Insert two R6 (size AA) batteries. Radio section Frequency range, antenna – FM: 87.5 - 108.0 MHz Rod antenna, AM: 530/531 - 1,710/1,602 kHz (10/9 kHz step) Ferrite bar antenna Deck section R6 (AA) When the reach of the remote control signal is less than 5 meters (16 feet), replace the batteries.
A 1 RADIO OPERATION Press RADIO BAND * repeatedly to select the desired band. FM AM The power is turned on and the previously tuned station is received. * or BAND on the remote control (applicable when the AC cord is connected) 2 Press f, g (TUNING -, +) to select a station. During FM stereo reception, is displayed. After listening, press POWER 6 STANDBY/ON to turn the power off.
SOUND ADJUSTMENT Volume or tone adjustment does not affect recording. VOLUME (VOL) Turn VOLUME on the unit or press VOL i or k on the remote control. The volume level is displayed as a number from 0 to 25. • The volume level is automatically set to 14 if the power is turned off when the volume level is set to 15 or more. • Pressing DISPLAY on the remote control displays the adjusted volume level. 3-MODE EQ * (equalizer) PRESETTING STATIONS You can preset up to 15 stations in each band.
B 1 CD OPERATION Press CD. The power is turned on. 2 Press PUSH OPEN to open the disc compartment. Place a disc with the printed side up and close the disc compartment. PUSH OPEN To select a track directly with the remote control, press the numbered buttons 0-9 and +10. CD play starts from the selected track and continues to the last track. Example: To select number 25, press +10, +10 and 5. To select number 10, press +10 and 0. After listening, press POWER 6 STANDBY/ON to turn the power off.
PROGRAMMED PLAY Up to 30 tracks can be programmed from the disc. 1 In stop mode, hold down s STOP/SET/ CLEAR * until “M” flashes in the display. The program number, “P-01” is also displayed. * or s STOP on the remote control 2 Press f or g to select a track, then press s to store it. Selected track number Total playing time of the selected tracks NOTE The total playing time of the selected tracks will be displayed as “ ”: - When it exceeds “99:59”. - When a track number 31 or higher is selected.
C TAPE OPERATION • Use Type I (normal) tapes only. • The unit plays (records on) the side facing up. PLAYBACK 1 Press TAPE. The power is turned on. 2 Press PUSH EJECT to open the cassette holder and insert a tape with the side to be played facing up and the exposed side facing forward. RECORDING 1 Insert a tape with the side to be recorded on facing up and the exposed side facing forward. 2 Get ready to record from the source. To record from a CD, press CD and load the disc.
SETTING THE SLEEP TIMER The unit can be turned off automatically at a specified time. 1 Hold down REPEAT/MODE/SLEEP * until “SLEEP” flashes in the display. 2 Within 4 seconds, press f or g to specify the time until the power is turned off. * or MODE on the remote control Each time it is pressed, the time changes between 10 and 180 minutes in 10-minute steps. Specified time While the sleep timer works, “SLEEP” is displayed.
NOTE REMARQUE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.