Proprietary of Aitek Inc Aitek Miner Plus Model: AMP-500-01 USER MANUAL 080-00001-00 AITEK USER MANUAL 1
Proprietary of Aitek Inc Table of Contents 1. PACKAGE CONTENT ..................................................................................................... 3 2. PRODUCT SPECIFICATIONS ...................................................................................... 4 3. INTRODUCTION ................................................................................................................ 4 4. NETWORK SYSTEMS ........................................................................
Proprietary of Aitek Inc 1.
Proprietary of Aitek Inc 2. PRODUCT SPECIFICATIONS Aitek Miner Plus Product Specifications CPU RAM Quad-core A55 2GB LPDDR4/ LPDDR4X Flash WIFI Bluetooth RF Connectivity Frequency Band Frequency 64GB eMMC 5.1 802.11 b/g/n WLAN BT5.
Proprietary of Aitek Inc 4. NETWORK SYSTEMS Aitek Miner Plus hotspot gateway integrates LongFi packets with Helium Miner. The hotspot sends the received LoRa terminal data packets to Helium Miner, then forwards them to the Console (Network Server) via the Miner. After that, pushes it to the application platform via the API interface. Ethernet Helium Blockchain Helium Network WiFi BT RF Aitek Miner Plus Gateway/Hotspot LoRa RF Devices or RF Sensors 5.
Proprietary of Aitek Inc 6. LED INDICATOR DESCRIPTION The different colors of the LEDs represent different working states of the device. Status LED Color Indicator Status Description The gateway is configured and operating normally. The network connection is normal.
Proprietary of Aitek Inc 7. USER INSTRUCTION 7.1 Download the mobile app. Download the app using Apple iPhone: o o o o Go to Apple app store button, search for Helium app. Download and install the Helium app Run the Helium app Continue to step 7.2 Apple app store Helium app Download the app using Android phone: Go to Google Play store, o Go to Google Play Store, search for Helium app. o Download and install the Helium app o Run the Helium app o Continue to step 7.2 Google play store Helium app 7.
Proprietary of Aitek Inc 7.2.2 Set up distribution network – Using WiFi, Ethernet or Bluetooth Open the Helium App from your phone, register to enter and select "Set up Hotspot". Select Aitek Miner Plus, read the “network configuration instructions” if you haven’t read it, or bypass the “network configuration instructions” by select "Skip" to follow the on-boarding step by step prompts on the app.
Proprietary of Aitek Inc Bluetooth button 3. Ethernet Cable Connection Ethernet connection requires connecting an Ethernet cable from Aitek’s Miner Plus to the network router equipment (the Ethernet cable is provided by the customer). Suggest to use CAT 6 or better rated Ethernet cable when possible. Please note that the Ethernet connection currently only supports automatic IP acquisition. Follow the app’s step by step process. Once on-boarding is successful, the LED light will turn green.
Proprietary of Aitek Inc 8.
Proprietary of Aitek Inc 9. MOUNTING GUIDE Aitek’s Miner Plus hotspot gateway can be mounted in the following methods. ➢ Desktop: Place the gateway on a horizontal surface. ➢ Wall-mount: Hang the gateway on the wall using proper wall mounting screws to fully secure the device. RF Antenna placement – best practice for strong signal: • • • • • Place the antenna in an open space where possible. Place the antenna at highest part of the house or structure where possible.
Proprietary of Aitek Inc APPENDIX – A FCC ID: 2A5L2AMP500 Important Safety Information - Read First Before installing, configuring, or operating any equipment, Aitek recommend user to access and read all relevant technical documentation. Aitek technical documentation can be found at Aiteks.com. Read and understand all safety instructions, cautions, and warnings in this d ocu me n t and the labels on the equipment.
Proprietary of Aitek Inc FCC Regulations This device complies wi th part 15 o f the FCC Rules. Operation is subject to the following tw o conditions: 1. This device may no t cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply w i th the requirements for CLASS B digital devices, pursuant to Part 15 o f FCC Rules.
