KDC100 USER MANUAL Rev0.
오류! 스타일이 정의되어 있지 않습니다. KDC100 Introduction The AISOLUTION data collector KDC100 is a compact, light and powerful reader with a rechargeable battery, OLED display, large memory and connections to PC, PDA and cellphone using serial and USB cable. KDC100 is well suited for a variety of portable applications. It can be used as an accessory to a PDA or cellphone as well as an independent data collector.
Installation and Operation Installation Prior to installing the included software on your PC, verify that your system meets the minimum system requirements. 1. Microsoft Windows operating system: 2000 or XP 2. Free space on hard drive of 512 MB. 3. Accessible USB port for connecting the KDC100 to your computer 4. 256M byte memory or larger.
오류! 스타일이 정의되어 있지 않습니다. Basic Operation Reading barcodes Point the KDC100 to the barcode and press the trigger key. A High beeper tone will be heard upon a successful scan. The front panel LED will illuminate in green. The scanned barcode will be displayed, along with barcode type and time stamp. 0123456789012 Code39 20061231:235959 When the barcode cannot be read, try the following: z Check that the width of barcode label does not exceed the width of the light beam.
Level 1 Level 2 Note View Data Delete Review and delete stored data EAN13 Enable/Disable Symbology EAN8 Enable/Disable Symbology UPCA Enable/Disable Symbology UPCE Enable/Disable Symbology CODE39 Enable/Disable Symbology ITF14 Enable/Disable Symbology CODE128 Enable/Disable Symbology I2of5 Enable/Disable Symbology CODABAR Enable/Disable Symbology EAN128 Enable/Disable Symbology CODE93 Enable/Disable Symbology CODE35 Enable/Disable Symbology BooklandEAN Enable/Disable Symbology
오류! 스타일이 정의되어 있지 않습니다. EAN13_ReturnCheckDigit Scan Angle Narrow/Wide Filter Normal/High Time Out 100..10000msec Minimum Barcode Length 2..36 Security Level 1..4 Memory Status # of stored barcode, amount of remaining memory Sleep Timeout 1sec..10sec Date & Time YYYY:MM:DD, HH:MM:SS Battery % left Version FW version.
Synchronization KTSync has two major functions – Synchronization and Keyboard Emulation. AISOLUTION Synchronization provides data upload functions to any Windows XP application. Keyboard Emulator enters scanned data directly into any XP application programs as if it was manually typed on the keyboard. KTSync also provides the following additional functions: z Prefixes, suffixes add function which further eliminates the need for manual data entry z Symbology and Scan Option selector z Barcode Wedging.
오류! 스타일이 정의되어 있지 않습니다. Synchronization The AISOLUTION KDC100 provides several synchronization options with hosts such as PC, PDA and Cellphone. The standard package includes the software for Windows XP synchronization. If you need cellphone or PDA integration, please contact your local representative. The user can configure various Synchronization and Keyboard Emulation function in the “Synchronization Settings” option.
Barcode Selection The user can configure barcode options in the Scan Module Settings menu.
CAUTION: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.