Remote Control Extender AUDIO / VIDEO DEVICES EXTENDING SYSTEM MODEL NO.
Remote Control Extender AUDIO / VIDEO DEVICES EXTENDING SYSTEM MODEL NO.
INTRODUCTION Your Wireless Infrared Extender Kit consists of a transmitter base unit which receives the IR signal from your infrared controller, and a receiver unit which transmits the IR control signal to your household appliances such as LD and/or VCR systems in another room without cable. The main function of IR extender is to convert the infrared signal into a radio frequency signal, which can extend the effective range of the existing infrared controller through walls, ceiling, or floor.
SAFETY INSTRUCTIONS 1. Read Instructions - All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions - The safety and operating instructions should be kept for future reference. 3. Heed Warnings - All warnings on the product and in the operating instructions should be adhered to. 4. Follow Instructions - All operating and use instructions should be followed. 5. Cleaning - Unplug this product from the wall outlet before cleaning.
10. Ventilation - Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer‘s instructions have been adhered to. 11.
17. Damage Requiring Service - Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: 18. When the power-supply cord or plug is damaged, 19. If liquid has been spilled, or objects have fallen into the product, 20. If the product has been exposed to rain or water, 21. If the product does not operate normally by following the operating instructions.
Installation of IR Extender: 1. Power Supply of IR Extender: 1.1. Transmitter unit: The transmitter unit can operate by using a power adapter : 1.1.1. Using Power Adapter: 1.1.1.1. Plug the input port (AC 110/220V) of Power Adapter into an AC outlet. 1.1.1.2. Plug the output port (DC 12/9V) of Power Adapter into the input jack on the rear of the transmitter. (antenna) (DC input jack) (IR OUT) option (back view of the transmitter) (power adapter) 1.2.
2. Installation Process of IR Extender system: 2.1. Connect power supply for transmitter and receiver as per step in item A. 2.2. Insert the attached antenna into the socket on the top of the transmitter and receiver unit individually. (The antenna is optional not for standard Accessories.) 2.3. Set up the receiver unit in front of your electronic appliances (TV, VCR, ...) to be remotely controlled and arrange the unit so that its purple semitransparent window faces the electronic appliances. 2.4.
If You Want To Use Video Sender Together With Remote Control Extender Same installation process as item B) of the paragraph of Installation, but follow a different procedure to install power supply : Use 2 DC cables: 1. Plug the male ends of DC cables into the Output Port of Video Sender, 2. Plug the female ends separately into the DC IN Ports of the IR Extender transmitter & receiver unit.
Trouble Shooting 1. Transmitter unit does not follow the commands from infrared controller 1.1. Check the power supply of transmitter first, 1.2. For batteries power only Check the batteries and be sure the “+, - ” ends are correct and double check if the batteries still work. 1.3. Check the distance between your infrared controller and the transmitter unit of IR Extender - its effective transmitting range is within 10 meters. 2.
3.2. Check the batteries power of the remote controller of your electronic appliance - be sure the batteries are still able to work, 3.3. Check the distance between the receiver unit of IR Extender and your household appliance to control - the distance can not be over 10 meters, 3.4.
DOC0000-0167
AWX701 SPECIFICATIONS AWX701 SPECIFICATIONS General Operate frequency range 418±0.1MHz(USA) Power ON indicater LED(Red) IR operating indicate LED(Red) Antenna type dipole IR RF Operating distance 30M Line sight Supply voltage DC 9V Operation temperature 0℃-50℃ Indoor use only Storage temperature -20℃-70℃ 418MHz±100kHz 65mm×147mm×57mm 50g Weight Transmitter Transmission measure level 82.
˙ IR Extender Transmitter: the unit Transmitter the data from IR signals and converts the data to 418 MHz ASK RF signals, then transmits data by RF signal. The unit consists of (1) Power Supply, (2) IR Receiver, (3 )Oscillator, (4) ASK Mixer, (5) TX Amp. & (6) Low Pass Filter. (1) Power Supply : Using one 78L05 regulator to convert the 9V DC to 5V DC. (2) IR Receiver : the unit converts the infrared ray signal of the remote controller to digital data for ASK modulator to do the ASK modulation.