Orig Ran Series System Installation Manual Ga Ald r'W. A 1 kK CEU abo fe 7. Ru, Sub SCOFF 8. Bet Rx Main ATT 9. Get Rx Sub ATT AD. Sel Tx All 41. HOV Status 12. showXewAliGain 0. Exit Select input Number Step 3 Enter the following: Select putrid Number =5 1 {f choosing 1 will take you td the below main, ALPHA © interchange Num [00 1: 1800] [1175] FO: Exit==> Step 4 From the above many, type the new channel desired (COMA channels from 1a 1500) and Dib exit.
One Ran Series System installation Manual i) Al Walk REF communications: 7} Check foray visible shipment damage to the equipment pistol ic transportation installation if any damage is observed, then notify the Carrier or responsible party ry resolve any Insurance: inspection suppression to handling or opening the packages. 8) Determine whets the IP-RAN equipment is to be installed. Obtain and review site: documentation blinding diagrams, Hook plans.
Orangutan Series System Installation: Manual ETE SE RAN.main unit and the RU amplifier stent be connected 10 6 common Site ground using ground straps provided with the system: The soundbite system must be independently tested and verified far low resistance fo ground 8.1.4 Verify location of LAN facilities and connection points 1} Locate the customer provided LAN connection points, This child be dedicatory Theme switch, ora offset Ethemetsonnectionipoints on an IP transport system terminal.
On Gran Series System Installation Manual a, A i war rent B46 Verify physical mounting racks are present and suitable 1 Racketeered IRAN systems must be mounted in a'suitable. 19° BAL standard rack system they san support the weight 'of the IP-RAN analysand provide adequate rear support for the power supply. Toning height requirements are as follows: A. Mai Unit 4 Rucksack Unities RY = 1.76" {4dmm])] b. RU System B RU{Rack Units} [3 Secateurs RU System] ©. PSHAW 2 MAURIAC modality] d.