802.
STATEMENT FOR MODUAL APPROVAL This product is sold to OEM integrators only. The manual for the OEM integrators must include some instructions to be followed by the end users in the user manual. For example: The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. The OEM integrators must be instructed about the end product labeling ("Contains TX FCC ID: QDWWM168GI") etc.
No part of this documentation may be reproduced in any form or by any means or used to make any derivative work (such as translation, transformation, or adaptation) without written permission from the copyright owner. All the other trademarks and registered trademarks are the property of their respective owners. Statement of Conditions We may make improvements or changes in the product described in this documentation at any time.
R&TTE Compliance Statement This equipment complies with all the requirements of the Directive 1999/5/EC of the European Parliament and the Council of 9 March 1999 on radio equipment and telecommunication terminal equipment (R&TTE)and the mutual recognition of their conformity.The R&TTE Directive repeals and replaces in the directive 98/13/EEC. As of April 8, 2000.
Norwegian Dette produktet er i henhold til bestemmelsene i det europeiske direktivet 1999/5/CE. Portuguese Este produto cump re com as normas da Diretiva Européia 1999/5/CE. Spanish Este producto cumple con las normas del Directivo Europeo 1999/5/CE. Swedish Denna produkt har tillverkats i enlighet med EG-direktiv 1999/ 5/EG. European Economic Area Restrictions Local Restriction of 802.
Canada IC Compliance Statement Low Power License-Exempt Radio communication Devices (RSS-210) 1. Warning Note: operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. 2. Operation in 2.
ARIB STD T33/T66 Compliance Statement: In the frequency bandwidth of this equipment, industrial device, scientific device, medical device like microwave ovens, licensed premises radio station and non-licensed specified low power radio station for mobile object identification system (RF-ID)that is used in product line of factories are used. 1. Please make sure before using this equipment that no premises radio station and no specified low-power radio of RF-ID are used in the neighborhood. 2.
DGT LP0002 Compliance Statement: 依據中華民國交通部電信總局低功率電波輻射性電機管理辦法; 第十四條 經型式認證合格之低功率射頻電機,非經許可,公司、商號或使用者均不得擅自變更頻率、加大 功率或變更原設計之特性及功能。 第十七條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信;經發現有干擾現象時,應立即停用, 並改善至無干擾時方得繼續使用。 前項合法通信,指依電信法規定作業之無線電通信。 低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。 8
Table of Contents Introduction........................................................................................................................................................... 10 Features ....................................................................................................................10 Package Contents .....................................................................................................10 System Requirements......................................................
I n t r o d u c t io n Being five times faster than the speed of 802.11b network standard devices, the innovative 802.11g standard lets the wireless network become incredibly easier and faster (up to 54Mbps) than ever. Your 802.11g WLAN USB Module surely will bring you into such a high-speed network sphere. This document describes how to install your 802.11g WLAN USB Module, which aims to let your computer communicate with 802.11 networks quickly and seamlessly.
System Requirements To properly operate your 802.
I n st a l la t in g 8 0 2 . 1 1 g W LA N U SB M o d u le To have the 802.11g WLAN USB Module operated appropriately, please read and go along with the instructions below carefully. Here we take Windows XP as an example. Installation Procedures 1. 2. Make sure that your 802.11 g WLAN USB Module has inserted to your PC. Before installation, the device can be found as a yellow question mark named Network Controller under expanded submenu of Other devices in Device Manager display window.
my wireless network settings checkbox. 3. Click OK to activate the settings and close the dialog box. 4. Double click the WLAN-G Configuration Tool tray icon to open the Wireless Settings dialog box. 5. In the prompted Wireless Settings dialog box, you may freely monitor and configure the network via contained tabs. Verifying a Successful Installation To confirm that your 802.11 g WLAN USB Module is properly installed, please go along with the procedures below. 1.