Quick Start Guide

5
GETTING TO KNOW YOU DEVICE
Package contents

Customer Premise Equipment-ONT AOT-4221SR unit
 12V2A power supply

Quick Installation Guide
 RJ45 Ethernet cable
 RJ11 Telephone cable
 Fiber cable
Device outlook
LED indicators
LED Status
White Solid Internet up with active connection
White Dim Internet up with no active connection
Green Blinking User connecting to Router
Pink Blinking Starting WPS function
Red Solid Internet Down
SETTING UP THE CUSTOMER PREMISE EQUIPMENT-ONT
 Check the device and note the Wi�i SSID/password information from the label
on the back of unit.
Position the Customer Premise Equipment-ONT on a desktop. Make sure you leave
enough space around the unit for ventilation and access to the cables.

 Ensure the connectivity as shown in the picture below.

After power up, the System LED lights up as Amber color.
CONFIGURING THE DEVICE
 On the computer, launch the web browser (e.g. Internet Explorer) and enter the
following IP address in the URL bar:
https://192.168.225.1
 When prompted, enter the default Username (admin) and Password (admin) and
press Login to access to

Connect the device to your computer.
Quick start Guide
5
DECLARATION OF CONFORMITY
This product must not be disposed of as normal household waste, in accordance with the EU
directive for waste electrical and electronic equipment (WEEE2 - 2012/19/EU). Instead, it should be
disposed of by returning it to the point of sale, or to a designated recycling collection point.
TECHNICAL SPECIFICATION
Environmental
Conditions
Temperature: -5°C to 45°C
Humidity: 5% to 95%
The product does not contain any Hazardous substances as listed in
2011/65/EU+(EU)2015/863 RoHS Directive.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of
the following
measures:
· Reorient or relocate the receiving antenna.
·Increase the separation between the equipment and receiver.
·Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
·Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modi�ications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
957DFV00AD