User's Manual

ManualsBrandsAirtech Information & Communication ManualsElectronicsVHF TRANSCEIVER

CONTENTS

GENERAL FEATURES .................................................1

UNPACKING..................................................................2

OPTIONAL ACCESSORIES.........................................2

GETTING READY..........................................................2

DESCRIPTION...............................................................2

LCD PANEL ...................................................................4

OPERATION ..................................................................5

ADDITIONAL FUNCTION .............................................6

CHARGER AND BATTERY ..........................................7

SPECIFICATIONS .........................................................7

General Features

1. Ultra compact design & size

(102 x 50 x 36mm, 310g with high capable battery)

2. Heavy durable construction

3. 90 channels

4. Alphanumeric LCD display up to 6 characters

5. 38 CTCSS/ 83 CDCSS

6. PC Programmable, transferable by cloning

7. Time-out timer (TOT)

8. Busy channel lock-out (BCLO)

9. Battery saving mode

10. Low battery alert

11. 2/5 tones programmable

12. 12.5KHz/25KHz channel spacing programmable

13. DTMF PTT-ID

14. Button lockable

15. Talking range to 5 miles

16. Transmit output power High/Low

17. DC7.5V Ni-MH battery

Summary of content (8 pages)

PAGE 1
CONTENTS General Features 1. GENERAL FEATURES .................................................1 UNPACKING..................................................................2 OPTIONAL ACCESSORIES .........................................2 GETTING READY..........................................................2 DESCRIPTION...............................................................2 LCD PANEL ...................................................................4 OPERATION ..................................
PAGE 2
Unpacking Getting Ready Unpack and check that all items have been enclosed. Packing contents: radio antenna battery pack (1,350 mAH) belt clip hand strap charger user’s manual 1. Installation, Removal Belt Clip Installation: align the belt clip with the plastic slots of the battery pack. Slide the belt clip onto the battery pack, pushing firmly until a click heard. Removal: hold up the belt clip release tab with a fingernail or a coin (or like instrument).
PAGE 3
Select the desired channel with pressing Up and Down button, pressing and holding down more than 1 second makes the channel moving fast. And you can choose On or Off in function mode. PTT(Push To Talk) Button Hold down to transmit, release to receive. Function Button Refer to “OPERATION” page 7. Monitor Button Press to monitor. Holding down over 2 seconds keeps monitoring function on, and press shortly again or PTT Button to stop. LCD Display Panel Refer to next page.
PAGE 4
LCD Panel Abnormal Abnormal DISPLAY FUNCTION T SCN H L Sub-tone Program Scanning Transmitt output power Clone Beep sound ! Button lock Cloning finished Channel Cloning rightward) On Off PTT-ID processing (moves
PAGE 5
Operation 1. Power Turn on / off and Volume Control Rotate the Power on/off and Volume Control Switch clockwise to turn power on, then the LED lights orange and power–up tone is generated after about on second, indicating the transceiver has passed the self–diagnostic. When you turn on the transceiver, it comes same channel and function with your last using. Rotate this switch clockwise to increase the volume or counterclockwise to reduce the volume. Rotate it counterclockwise fully to turn power off. 2.
PAGE 6
9. 10. 11. 12. When you press Function Button once sign on LCD blinks. (in case of being selected button lock function on blinks) Press Channel Select Button to select the beep sound on or off. Press PTT Button to finish selection. Button Lock on / off When you press Function Button twice, sign on LCD blinks. Press Channel Select Button to select the button lock on or off. Press PTT Button to finish selection.
PAGE 7
Charger and Battery 1. Battery (Ni-MH) Voltage DC 7.5V Duty time HM-1350 Over 8 hrs (5-5-90) HM-720 Over 4 hrs 2. Charger Input power Free voltage (AC90~250V) Charging time HM-1350 Appr. 100min HM-720 Appr. 60min Operating temperature 0ºC~55ºC Connect the charger to electric power supply (free voltage AC 90~250 V). Turn the transceiver power off and put into front socket of the charger. The red light turns on during charging and the green light turns on when finished.
PAGE 8
Land Mobile Radio (LMR) Model: AT-100 A/B AT-200 AT-400 A/B Airtech Information & Communication Co., Ltd.