User’s Manual FM HANDHELD TRANSCEIVER Model: AQ-40B
APPROVAL 1. FCC Approval FCC ID : 1) Safety Training Information Your FM Handheld Transceiver generates RF electromagnetic energy during transmit mode. This radio is designed for and classified as “Controlled Exposure / Occupation Environment”, meaning it must be used only during the course of employment by individuals aware of the hazards, and the ways to minimize such hazards. This radio is NOT intended for use by the “General Population / Uncontrolled Environment.
CONTENTS General Features GENERAL FEATURES.................................................2 UNPACKING.................................................................3 OPTIONAL ACCESSORIES.........................................4 GETTING READY.........................................................4 DESCRIPTION..............................................................5 OPERATION .................................................................5 CHARGER AND BATTERY...................................
Unpacking Unpack and check that all items have been enclosed. Packing contents: ±radio ↑antenna →battery pack (1,650 mAH) ↓belt clip °hand strap ±charger ″user’s manual Optional Accessories External speaker/microphone 1. Additional battery pack Getting Ready 1. Installation and Removal, Belt Clip Installation: Align the belt clip with the plastic slots of the battery pack. Slide the belt clip onto the battery pack, pushing firmly until a click heard.
4 2. Audio Volume Control Audio volume is increasedwhen rotating volume switch clockwise. Audio volume is decreased when rotating the volume switch counter-clock. 3. Channel Selection: Possible to channel selection when rotating volume knob clockwise or counter clock wise while holding down Function switch. Description Operation 1. Power on / off On : Holding down on/off switch for 2 seconds, LED lamp would be flashed red and green alternately. When LCD window is lighted, it is Okay.
can be configured for several different types of decode operation. If a channel is selected that has Selcall activated the radio will be muted until the proper signal is received. When this occurs the radio can sound a ringing type alert signal or a voice message maybe heard. Depending upon the initial programming, pressing the PTT may cause an automatic identifier to be sent.