Quick Start Guide

1 2 3 4 5
WELCOME
TO THE LTE CPE
Please insert your SIM card as following:
The figure is for reference only
Connect the hardware
according to your requirements.
When you are using the AirSpot, you can adjust its
position and
to get stronger LTE signal
he Signal ndicator .
The figures provided in this document are for
reference only
Make sure the CPE is turned off before you insert or
remove your SIM card. Otherwise, the CPE and SIM
card may be damaged.
Additional information
Optional methods or shortcuts for an action
Potential problems or conventions that need to be
specified
Package Contents
Please check the package contents before installation:
>
> Power Adapter
> Ethernet Cable
>
If you find any missing or damaged , please contact your
local
> Quick Start Guide
> Warranty Card
GETTING STARTED
Equipment Appearance
1
2
3
4
5
6
7
8
POWER Indicator
Internet Indicator
2.4G WiFi Indicator
5G WiFi Indicator
LED INDICATION
SET UP THE HARDWARE
Insert SIM Card
HARDWARE CONNECTION
·You can connect your computer or classic Switch via
Ethernet cable to LAN port.
·You can connect your laptop via Wi-Fi.
Step 1 Connect the supplied power adapter to the CPE.
Step 2 Connect other devices.
Step 3 Power on AirSpot.
INTERFACES AND BUTTONS
Interface & button Description
DC power input port
Connects computer, switches (non PoE
devices) or other LAN devices
Press 1s to reboot device.
Press 10s and more, AirSpot will restore to factory mode.
You will lose user defined settings when you reset
the AirSpot. Be cautious when clicking Reset Button.
USIM slot
Voice port
Power Port
9
TEL Port(optional)
LAN1 LAN2 RESET DC IN
LAN1 LAN2 RESET TEL DC IN
1
2
3
4
5
6
7
8
9
POWER
Indicator Status Description
Steady on
Off
Off
Off
Power On
No Power Supply
INTERNET
Steady on Internet Available
Internet Unavailable
Blinking
(500ms interval)
Data Transmission
Steady on 2.4G WiFi Available
2.4G WiFi unavailable
Blinking
(500ms interval)
Data Transmission
Blinking
(1sec interval)
Off
Steady on
Blinking
(500ms interval)
Blinking
(1sec interval)
Setting up WPS connection
5G WiFi Available
5G WiFi unavailable
Data Transmission
Setting up WPS connection
TEL
WIFI
Steady on
Display the current LTE network signal, the stronger
signal, the more bars on
Off No Signal
Blinking one by one Firmware upgrade
2.4G WiFi
5G WiFi
SIGNAL
Signal Indicator
LAN Port
Reset Button
SIM
TEL
Steady on
Off
Blinking
(500ms intervel)
Blinking
(1sec intervel)
2.4G or 5G or both WIFI avaiable
Both 2.4G and 5G WIFI unavaiable
Data in transit
WPS is connecting
Steady on
Off
Blinking
(500ms intervel)
Registered to SIP server
Unregistered
In call
TYPE A
TYPE B
TYPE A
TYPE B
DC IN
LAN1-LAN2
RESET
AirSpot 4G CPE
Quick Start Guide
Ge�ng started with your device.
PN: 6061A4453323