A I R V E L O C I T Y 2700 5G S U B -6H Z 4T4R INDOOR RADIO UNIT Installation Guide Document Part Number: DUG01251 Document Revision: A3 Published: April 2021 © Copyright by Airspan Networks Ltd., 2021. All rights reserved worldwide.
AirVelocity 2700 5G Sub-6Hz 4T4R Indoor Radio Unit – Installation Guide © Copyright by Airspan Networks Ltd., 2021. All rights reserved worldwide. Legal Notices The information contained within this document is proprietary, privileged and intended only for the recipient. As such, the information is subject to all relevant copyright, patent and other laws protecting intellectual property, as well as any specific agreements protecting Airspan Networks Ltd. rights in the aforesaid information.
AirVelocity 2700 5G Sub-6Hz 4T4R Indoor Radio Unit – Installation Guide TABLE OF CONTENTS Document Information................................................................................................................ 1 Revision History ............................................................................................................................1 Warnings and Cautions ...............................................................................................................
AirVelocity 2700 5G Sub-6Hz 4T4R Indoor Radio Unit – Installation Guide FIGURES Figure 1: AirVelocity 2700 5G ........................................................................................................................6 Figure 2: AirVelocity 2700 5G Sub-6 Physical Dimensions ....................................................................... 10 Figure 3: Assemble Ceiling Clip ..................................................................................................................
AirVelocity 2700 5G Sub-6Hz 4T4R Indoor Radio Unit – Installation Guide Document Information This document details procedures for installing the Airspan’s AirVelocity 2700 5G Sub-6Hz, RU aimed as part of the 5G NR standard and its place in the Airspan product suite. This document is intended for qualified personnel with a working knowledge of 5G. Revision History Revision Date Rev 0.1 December 2020 Rev 0.2 + 0.
AirVelocity 2700 5G Sub-6Hz 4T4R Indoor Radio Unit – Installation Guide Warnings and Cautions Human Exposure to Radio Frequencies The AirVelocity 2700 5G Sub-6 should be operated from a minimum safe distance of 20 cm (7.87 in.) during normal operation. Radio Interference The AirVelocity 2700 5G Sub-6 generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
AirVelocity 2700 5G Sub-6Hz 4T4R Indoor Radio Unit – Installation Guide General Only qualified personnel should be allowed to install, replace, and service the equipment. The device cannot be sold retail, to the general public or by mail order. It must be sold to operators. Installation must be controlled. Installation must be performed by licensed professionals. Installation requires special training.
AirVelocity 2700 5G Sub-6Hz 4T4R Indoor Radio Unit – Installation Guide Airspan products do not contain hazardous substances (as defined in UK Control of Substances Hazardous to Health Regulations 1989 and the Dangerous Substances Regulations 1990). At the end of any Airspan products life cycle, the customer should consult with Airspan to ensure that the product is disposed of in conformance with the relevant regulatory requirements.
AirVelocity 2700 5G Sub-6Hz 4T4R Indoor Radio Unit – Installation Guide Purpose This guide provides the workflow and step-by-step procedures for installing the Airspan’s AirVelocity 2700 a high performing RU variant.
AirVelocity 2700 5G Sub-6Hz 4T4R Indoor Radio Unit – Installation Guide 1 Introduction This section provides a descriptive overview of the Airspan’s AirVelocity 2700 and its place in the Airspan product suite. This document is intended for readers with 5G working knowledge. All information in this document is for general information only, and is subject for change without notice. 1.1 AirVelocity 2700 5G Sub-6Hz The AirVelocity 2700 RU is a Radio Unit (RU) for 5G Radio Access Network (RAN).
AirVelocity 2700 5G Sub-6Hz 4T4R Indoor Radio Unit – Installation Guide 2 Getting Started 2.1 AirVelocity 2700 Job Sheet Plan the installation of the AirVelocity 2700 by using the Job Sheet, which you can find as a removable job aid in Appendix A for this guide. 7 © Copyright Airspan Networks Ltd., 2021 P/N: DUG01251 Rev.
AirVelocity 2700 5G Sub-6Hz 4T4R Indoor Radio Unit – Installation Guide 3 Verifying Prerequisites Prior to installing the AirVelocity 2700 5G Sub-6Hz, verify the required safety, power, tools, parts and components. This chapter includes the hardware, software, and client requirements for installation. Important: Set up requirements for the installation is detailed in the Job Sheet, see Appendix A. 3.
AirVelocity 2700 5G Sub-6Hz 4T4R Indoor Radio Unit – Installation Guide Installation Kit / Part Airspan No. Part No. AirVelocity 2700 5G Sub-6 Mounting Kit AV27-WCMK-ID-1 AirVelocity External AC to DC Power Supply (EU) AV27-PSU-ID-AC-EU-1 AirVelocity External AC to DC Power Supply (US) AV27-PSU-ID-AC-US-1 903-03-049 Consisting of: Image Mounting Kit is included in the packaging: Mounting Bracket Suspended Ceiling clip Hardware – 5 M3X6 screws AC ADAPTER,150W, IN 100240VAC,OUT 56VDC/2.
AirVelocity 2700 5G Sub-6Hz 4T4R Indoor Radio Unit – Installation Guide 3.2.3 Physical Dimensions AirVelocity 2700 5G Sub-6 is in an indoor enclosure. Table 4: AirVelocity 2700 5G Sub-6 Physical Dimensions Dimensions (H x W x D) Volume Weight 225 x 225 x 44mm / 8.8 x 8.8 x 1.7” 2.22l 1.65Kg / 3.6 Lbs. Figure 2: AirVelocity 2700 5G Sub-6 Physical Dimensions 10 © Copyright Airspan Networks Ltd., 2021 P/N: DUG01251 Rev.
AirVelocity 2700 5G Sub-6Hz 4T4R Indoor Radio Unit – Installation Guide 4 AirVelocity 2700 5G Sub-6 Installation AirVelocity 2700 supports ceiling (suspended ceiling and conventional ceiling) and wall mounting by using these elements. AirVelocity 2700 Mounting Kit: Mounting plate – used for mounting on either a suspended ceiling, a conventional ceiling or on the wall. Ceiling Clip – used for mounting on a suspended ceiling – provided with screws, (M3x 6mm x5), (M3x6 for locking). 4.
AirVelocity 2700 5G Sub-6Hz 4T4R Indoor Radio Unit – Installation Guide 4. Fasten the Mounting bracket ceiling clip onto the suspended ceiling’s keel/T-bar. Figure 5: Assemble the Mounting Bracket with the Clip onto the Keel/T-bar 5. Slide together the clip onto the suspended ceiling’s T-bar, as shown below: Figure 6: Tighten Clip to T-bar 6. Fasten the clip with the 4 – M3x6 screws, as shown below: Figure 7: Tighten the Screws 12 © Copyright Airspan Networks Ltd., 2021 P/N: DUG01251 Rev.
AirVelocity 2700 5G Sub-6Hz 4T4R Indoor Radio Unit – Installation Guide 7. Lift the AirVelocity 2700 5G Sub-6 into position and align the mounting screws (supplied) into the key-holes on the underside of the mounting bracket, as shown below: 8. Slide unit to engage the key-hole slots. Figure 8: View from the Bottom 9. Insert the M3X6 screw to lock the unit onto the Mounting bracket. Figure 9: M3X6 Locking Screw 13 © Copyright Airspan Networks Ltd., 2021 P/N: DUG01251 Rev.
AirVelocity 2700 5G Sub-6Hz 4T4R Indoor Radio Unit – Installation Guide 10. After installation is completed install the Kensington Security lock, this is used both for anti-theft and anti-drop purposes. Loop the other end of the Security cable to a secure riser. Figure 10: Install Security Lock 11. Connect the necessary cables to the relevant ports, see Cable Connections.
AirVelocity 2700 5G Sub-6Hz 4T4R Indoor Radio Unit – Installation Guide 4.1.2 Conventional Ceiling Assembly 1. Determine the optimal position where the AirVelocity unit is to be installed. 2. Set aside the Ceiling clip (it is not needed for conventional ceiling assembly). 3. Position the mounting bracket on the ceiling. Be sure to position the mounting bracket straight to ensure the unit sits as required. 4.
AirVelocity 2700 5G Sub-6Hz 4T4R Indoor Radio Unit – Installation Guide Figure 13: Mounting AirVelocity Unit on the Mounting Bracket 8. Insert the M3X6 screw to lock the unit onto the Mounting bracket. as shown below: Figure 14: Locking Screw M3X6 9. After installation is completed install the Kensington Security lock, this is used both for anti-theft and anti-drop purposes. Fasten the other end of the Security cable to the ceiling using a screw & plug into a secure area of the ceiling. 10.
AirVelocity 2700 5G Sub-6Hz 4T4R Indoor Radio Unit – Installation Guide 4.2 Wall Mount The following describes the Wall mounting procedure: 1. Select the required location where the AirVelocity unit is to be installed on the wall. 2. Utilize the mounting bracket and position it against the wall where the unit is to be mounted. Position with the Arrow symbol pointing up. Be sure to position the mounting bracket straight and level mounting to ensure the unit sits level. 3.
AirVelocity 2700 5G Sub-6Hz 4T4R Indoor Radio Unit – Installation Guide 7. Push down slightly to engage the heads of the screws onto the slots. 8. Insert the M3X6 screw to lock the unit onto the Mounting bracket. as shown below: Figure 17: Fasten Unit on Mounting Bracket 9. Optionally after installation is completed install the Kensington Security lock, this is used both for anti-theft and anti-drop purposes. Fasten the other end of the Security cable to a secure connection on the wall. 10.
AirVelocity 2700 5G Sub-6Hz 4T4R Indoor Radio Unit – Installation Guide 4.3.3 Copper Ethernet Cable Connection Insert RJ45 connection (when applicable), as shown in figure below. Figure 18: Cable Connections 4.4 LED Display The two LEDs on the unit panel, provide unit status indication.
AirVelocity 2700 5G Sub-6Hz 4T4R Indoor Radio Unit – Installation Guide Job Sheet This job sheet enables the users to keep track of their installation. It covers all the prerequisites required for accomplishing the AirVelocity 2700 installation.
AirVelocity 2700 5G Sub-6Hz 4T4R Indoor Radio Unit – Installation Guide Table 8: Acronyms, Abbreviations, and Definitions Term LED NR 5G RU UE Expansion Light Emitting Diode New Radio Long Term Evolution Radio Unit User Equipment. The end user in 5G 21 © Copyright Airspan Networks Ltd., 2021 P/N: DUG01251 Rev.
AirVelocity 2700 5G Sub-6Hz 4T4R Indoor Radio Unit – Installation Guide Customer Service Help Desk Airspan’s Customer Care Help Desk offers prompt and efficient customer support services. To take advantage of Airspan’s Customer Care Help Desk support, you must be a registered user and must have a valid support contract. To register, click here and fill the Registration form. To create and update issue logs, send e-mails to Customer Care Help Desk.
Federal Communications Commission (FCC) Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generate, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.