H External Antennas Specifications This appendix provides specifications for optional third-party external antennas for WipLL devices operating in the 900 MHz and 700 MHz bands. H.1. WipLL 900 MHz H.1.1. BSR (at Base Station) Airspan offers the following optional third-party external antennas for BSR devices operating in the 900 MHz band: Panel 35°/ 18.
E x t e r n a l An t e n n a s S p e c i f i c a t i o n s System Description H.1.1.1. Panel 35°/ 18.6 dBi The Panel 35°/ 18.6 dBi antenna’s radiation pattern and physical design is shown in the figure below. Figure H-1: Panel 35°/ 18.6 dBi antenna radiation pattern The table below lists the Panel 35°/ 18.6 dBi antenna specifications. Table H-1: Panel 35°/ 18.6 dBi antenna specifications Electrical specifications Frequency range 870 – 960 MHz Polarization Vertical Gain (dBd/dBi) 16.5/18.
System Description E x t e r n a l An t e n n a s S p e c i f i c a t i o n s Electrical specifications IM Suppression – Two 20 Watt Carriers -150 dBc Impedance 50 Ω Max. Input Power 500 Watts Lightening Protection DC Ground Mechanical specifications Weight 17.5 lbs (7.9 kg) Dimensions (LxWxD) 48.5 x 18.5 x 5 in. (1232 x 470 x 127 mm) Max. Wind Area 5.3 ft2 (0.49 m2) Max. Wind Load (at 100 mph) 213 lbf (947 N) Max.
E x t e r n a l An t e n n a s S p e c i f i c a t i o n s System Description Figure H-2: Panel 120°/16 dBi antenna radiation pattern (at mid-band) The table below lists the Panel 120°/16 dBi antenna specifications. Table H-2: Panel 120°/16 dBi antenna specifications Electrical specifications Frequency range 806 – 960 MHz Polarization Vertical Gain 16 dBi Half-power beam width • H-plane: 120° • E-plane: 7° Impedance 50Ω VSWR <1.4:1 Max. Power 500 W (limited by connector only) Lobe Tilt 1.
System Description E x t e r n a l An t e n n a s S p e c i f i c a t i o n s Electrical specifications Wind area 0.73 m2 (7.87 ft2) Weight 14 kg (31 lbs) Wind load at 50 m/s 1140 N (256 lbs) Depth 160 mm (6.3 in.) Width 295 mm (11.6 in.) Length 2450 mm (96.5 in.) H.1.1.3. Panel 62°/16 dBi The Panel 62°/16 dBi antenna’s radiation pattern and physical design is shown in the figure below. Figure H-3: Panel 62°/16 dBi antenna radiation pattern (at mid-band) 25030311-08 Airspan Networks Inc.
E x t e r n a l An t e n n a s S p e c i f i c a t i o n s System Description The table below lists the Panel 62°/16 dBi antenna specifications. Table H-3: Panel 62°/16 dBi antenna specifications Electrical specifications Frequency range 806 – 960 MHz Polarization Vertical Gain 16 dBi Half-power beam width • H-plane: 62° • E-plane: 14° Impedance 50Ω VSWR <1.4:1 Max. Power 500 W (limited by connector only) Lobe Tilt 1.
System Description E x t e r n a l An t e n n a s S p e c i f i c a t i o n s H.1.1.4. Panel 90°/17 dBi The Panel 90°/17 dBi antenna’s radiation pattern and physical design is shown in the figure below. Figure H-4: Panel 90°/17 dBi antenna radiation pattern (at mid-band) 25030311-08 Airspan Networks Inc.
E x t e r n a l An t e n n a s S p e c i f i c a t i o n s System Description The table below lists the Panel 90°/17 dBi antenna specifications. Table H-4: Panel 90°/17 dBi antenna specifications Electrical specifications Frequency range 806 – 960 MHz Polarization Vertical Gain 17 dBi Half-power beam width • H-plane: 90° • E-plane: 7° Impedance 50Ω VSWR <1.4:1 Max. Power 500 W (limited by connector only) Lobe Tilt 1.
System Description E x t e r n a l An t e n n a s S p e c i f i c a t i o n s H.1.1.5. Omni-Directional 360°/12 dBi (3° Lobe Tilt) The Omni-Directional 360°/12 dBi (3° Lobe Tilt) antenna’s radiation pattern and physical design is shown in the figure below. Figure H-5: Omni-Directional 360°/12 dBi (3° Lobe Tilt) radiation pattern (at mid-band) 25030311-08 Airspan Networks Inc.
E x t e r n a l An t e n n a s S p e c i f i c a t i o n s System Description The table below lists the Omni-Directional 360°/12 dBi (3° Lobe Tilt) antenna specifications. Table H-5: Omni-Directional 360°/12 dBi (3° Lobe Tilt) antenna specifications Electrical specifications Frequency range 870 – 960 MHz Polarization Vertical Gain 12 dBi Half-power beam width • H-plane: 360° • E-plane: 7° Impedance 50Ω VSWR <1.43:1 Max.
System Description E x t e r n a l An t e n n a s S p e c i f i c a t i o n s H.1.1.6. Omni-Directional 360°/12 dBi (5° Lobe Tilt) The Omni-Directional 360°/12 dBi (5° Lobe Tilt) antenna’s radiation pattern and physical design is shown in the figure below. Figure H-6: Omni-Directional 360°/12 dBi (5° Lobe Tilt) radiation pattern (at mid-band) 25030311-08 Airspan Networks Inc.
E x t e r n a l An t e n n a s S p e c i f i c a t i o n s System Description The table below lists the Omni-Directional 360°/12 dBi (5° Lobe Tilt) antenna specifications. Table H-6: Omni-Directional 360°/12 dBi (5° Lobe Tilt) antenna specifications Electrical specifications Frequency range 870 – 960 MHz Polarization Vertical Gain 12 dBi Half-power beam width • H-plane: 360° • E-plane: 7° Impedance 50Ω VSWR <1.43:1 Max.
System Description E x t e r n a l An t e n n a s S p e c i f i c a t i o n s H.1.1.7. Sector Antenna (65°/15.5 dBi) This antenna is designed for best non-line of sight performance with Airspan’s BSR operating in the 900 MHz band. Advanced features include: high gain and mechanical down tilt. Figure H-7: Sector antenna radiation pattern 25030311-08 Airspan Networks Inc.
E x t e r n a l An t e n n a s S p e c i f i c a t i o n s System Description The table below lists the Sector antenna specifications. Table H-7: Sector antenna specifications Electrical specifications Frequency range 870 –960 MHz Polarization Vertical Gain 15.5 dBi Half-power beam width • H-plane: 65° • E-plane: 13° Front-to-back ratio >25 dB Impedance 50 . VSWR <1.3 Intermodulation IM3 (2 x 43 dBm carrier) <–150 dBc Max.
System Description E x t e r n a l An t e n n a s S p e c i f i c a t i o n s H.1.1.8. Omni-Directional Antenna (11 dBi) This antenna is designed for best non-line of sight performance with Airspan’s BSR operating in the 900 MHz band. Figure H-8: Omni-directional antenna radiation pattern 25030311-08 Airspan Networks Inc.
E x t e r n a l An t e n n a s S p e c i f i c a t i o n s System Description The table below lists the Omni-directional antenna specifications. Table H-8: Omni-directional antenna specifications Electrical specifications Frequency range 870 – 960 MHz Polarization Vertical Gain 11 dBi Impedance 50Ω VSWR <1.5 Intermodulation IM3 (2 x 43 dBm carrier) <–150 dBc Max.
System Description E x t e r n a l An t e n n a s S p e c i f i c a t i o n s H.1.2.1. 10 dBi Panel The following table lists the 10-dBi Panel antenna specifications. Table H-9: 10 dBi Panel antenna specifications Electrical Frequency range 902 - 928 MHz Gain 10 dBi (min) VSWR 1.
E x t e r n a l An t e n n a s S p e c i f i c a t i o n s System Description Shock mechanical IEC 60721-3-4 - - 4M3 Humidity ETSI EN300-2-4 T4.1E 144 h - 95% Water tightness IEC 529 - - IP67 Solar radiation ASTM G53 1000 h - - Flammability UL 94 - - CLASS HB Salt spray IEC 68-2-11 Ka 500 h - - Ice and snow - - - 25mm radial Wind speed survival - - - 220 Km/h 160 Km/h Operation Wind load (survival): - - - • Front thrust • 26.8 kg • Side thrust • 2.2 kg H.1.
System Description E x t e r n a l An t e n n a s S p e c i f i c a t i o n s Mechanical Dimensions (LxWxD) 190x190x30 mm (max) Weight 0.7kg (max) Connector N-Type Female Radome Plastic Base plate Aluminum with chemical conversion coating Outline drawing RD41245600C Mounting kit MT-120018/A Environmental Test Standard Duration Temperature Notes Low temperature IEC 68-2-1 72 h -55°C - High temperature IEC 68-2-2 72 h +71°C - Temp.
E x t e r n a l An t e n n a s S p e c i f i c a t i o n s System Description H.2. WipLL 700 MHz The built-in antennas of all WipLL radios, except for WipLL 700 MHz, cover all frequencies in their respective frequency band. WipLL 700 MHz built-in antenna covers only Band C (i.e. 710 to 716 MHz, and 740 to 746 MHz) frequency band. Therefore, Airspan provides an external antenna for WipLL 700, allowing coverage of the entire 700 MHz band (698 to 746 MHz), including the licensed A and B bands used in USA.
System Description E x t e r n a l An t e n n a s S p e c i f i c a t i o n s External antenna type Parameter Value Beam Width H X V (degrees) 360 x 20 Polarization Vertical VSWR 1.5 Impedance (ohm) 50 Table H-12:: SPR 700 MHz external yagi antenna Parameter SPR 700 MHz Frequency Range (MHz) 698 - 746 Gain (dBi) 13 Beam Width H X V (degrees) 32 x 32 Polarization Vertical/horizontal VSWR < 1.8 Impedance (ohm) 50 Front-to-Back Ratio (dB) > 15 H.2.2.
E x t e r n a l An t e n n a s S p e c i f i c a t i o n s System Description Figure H-9: Frequency allocation in a four-sector Base Station Radio interference may occur between the BSRs operating in the upper frequency range (i.e., 742 MHz and 744 MHz) and the lower frequency range (i.e., 712 MHz and 714 MHz). To overcome this interference, a 1-meter vertical separation is recommended between the BSRs operating in the upper frequency and the BSRs operating in the lower frequency.