USER MANUAL Contents PREFACE Trademarks FCC Compliance Copyright Statement ID-R400 Introduction Features Hardware LED Indicators Data Connections Antennas Environmental Limits CUSTOMER SUPPORT airPointe Customer Support
USER MANUAL PREFACE Trademarks airPointe of New Hampshire and the airPointe of New Hampshire logo are trademarks of airPointe of new Hampshire. All other product names are copyright and registered trademarks or trade names of their respective owners. Information in this document is provided solely to enable system and software implementers to use the airPointe of New Hampshire system.
USER MANUAL “WARNING! FCC Radiation Exposure Statement: This equipment complies with FCC’s RF radiation exposure limits set forth for an uncontrolled environment under the following conditions: 1. This equipment should be installed and operated such that a minimum separation distance of 20cm is maintained between the radiator (antenna) & user’s/nearby person’s body at all times 2. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
USER MANUAL PREFACE COPYRIGHT STATEMENT Copyright © 2007 airPointe of New Hampshire. All Rights Reserved. This document, as well as the hardware and firmware described therein, are furnished under license and may only be used or copied in accordance with the terms of such license.
USER MANUAL ID-R400 INTRODUCTION airPointe delivers software and hardware solutions that enable healthcare organizations to streamline operations, improve quality-of-care, reduce costs and generate additional revenue. airPointe develops an innovative next generation Intelligent Real-Time Location System (i-RTLS) which can gather data on high-value assets within an organization, including medical equipment, clinical staff, patients and visitors.
USER MANUAL ID-R400 HARDWARE The tags are incased in a 3 3/16” x 2 5/16” x 5/16 (8cm x 5.8cm x .8cm) UL rated ABS Cellcore plastic housing and contain the internal components of a RF transmitter and battery source. LED Indicators There are 8 LEDs on the front of the ID-R400. As you look at the front of the device starting on the left the LEDs represent as follows: -Power- LED signifies that the device has power applied through an external power supply.
USER MANUAL -CF- (Option) LED signifies that a compact flash card has been inserted into compact flash slot. LED will remain constant if compact flash card is present. ID-R400 Data Connections There are three inputs as you look at the top of the device. As the router lay on its back (the flat side) the inputs are as follows: -LAN Port- This RJ-45 jack is for the option of setting up a sub network using the router as a gateway.
USER MANUAL Temperatures: 0° C to 70°C If device is exposed to temperatures or humidity levels outside of the parameters above, it may cause the device to not function properly. CUSTOMER SUPPORT AIRPOINTE CUSTOMER SUPPORT airPointe gives the ability to intended parties to contact airPointe directly if any problems should arise. -Customer Support Via Phone: 603.994.2200 Via Email: support@airpointe.com Via the Web: www.airpointe.