Welcome to Airgraft We care deeply about your health and wellbeing. That’s why we’ve worked tirelessly to design and engineer our evolutionary vaporizer and pods. No off-gassing. No heavy metals. No estrogenic reactions. Just complete control, total transparency and clean vapor. Enjoy your Airgraft responsibly.
Product Configuration Reading the LED diagrams There are three LEDs on your device represented as such: Left Centre Right
Getting started By default, your device will be in standby mode. To wake up your device from standby mode, insert a compatible pod (purchased separately) into the device. Note: if this is the first time you’re using your device, you may need to charge it. When the pod is properly inserted, the indicator light will pulse Beige, meaning the device is ready for use. If you don’t see this behavior, take out the pod and re-insert it.
Then, make sure your phone is connected to the internet and its Bluetooth is turned on and discoverable. Activate the pairing function in your app (see above). Then, ensure your device is charged and bring your device out of standby mode by inserting a pod. If your device is not paired to any app, it will automatically look for an app, the center LED light will blink Blue as your device is looking for the app. -> -> -> When successfully paired, all three LED lights will show Blue.
Controlling your dose Your device is designed with your safety in mind and will inform you when your draw contains a very heavy dose. The indicator light will transition from Amber to Red in these cases. -> -> -> If you’ve set up Dosage Control within the mobile app, the indicator light will also transition to Red when your Dose Limit has been reached. At this time, your device will turn off and no longer produce vapor.
The indicator light will inform you of your battery level in White every time your device enters and exits standby mode. Battery Level = 67% - 100%; High Battery Level = 33% - 66%; Medium Battery Level = 11% - 32%; Low Battery Level = 1% - 10%; Critical The indicator light will also display your battery level outside of the above conditions should your device enter critical battery zone (less than 10% remaining) during a session. We highly recommend that you charge your device at this time.
Updating your firmware The firmware is software used to control your device. The firmware will need to be updated from time to time using your app. When your app detects that a firmware update is available, it will prompt you to update the firmware to the latest version. Please ensure that your device is charged as you initiate the firmware update and be sure to keep your device in range of your app until the process is completed. During the firmware update process, the LED lights will blink Beige.
CURRENT COPY WARNING Keep your Airgraft Clean Vaporizer and all its components out of the reach of children and pets. Do not disassemble or tamper with your Airgraft Clean Vaporizer. Any inappropriate, incorrect or irresponsible use will void any warranty and can result in serious injury. Do not use your Airgraft Clean Vaporizer if it appears to be damaged, broken or is operating in an unusual manner. Do not use your Airgraft Clean Vaporizer if it is unusually hot to touch.
EU Conformity Notice WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. EN Test Regulation Version ETSI EN 300 328 V2.1.1 (2016-11) ETSI EN 301 489-1 V2.1.1 (2017-02) ETSI EN 301 489-17 V3.1.1 (2017-02) EN 62311:2008 EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013 Industry Canada Statements This device complies with Industry Canada’s licence-exempt RSS’s.
Dimensions (WxDxH): 22x76.86x12(With Pod), 22.0x75.12x12.0 (Without Pod) Weight: 39.7g(With Pod), 36g(Without Pod) Battery Type : 3.7V 330mA rechargeable Li-polymer battery Operating Temperature : -5 - 45°C Supported OS: As of April 2019, we support iOS 12 and higher / Android 6.0 or higher Bluetooth Specification Version: Bluetooth 5.0 LE RF Frequency Band: 2402 ~ 2480MHz (40 channel) Max Output Power: 0 dBm Manufacturer Airgraft Inc. 300-218 St. Paul W. Montréal QC H2Y 1Z9 CANADA contact@airgraft.
