Document Number 640-00084c-01 Airgo Networks AGN0912AR-01 Installation and Configuration Guide Updated 5/24/2005 Airgo Document PN: 640-00084c-01 AGN0912AR-01 BBGW Radio--2.4 GHz MISO Design Details Airgo Networks Inc.
AGN0912AR-01 802.11b/g MISO BBGW Radio Preliminary Product Details Table of Contents Product Description ............................................................................................................ 3 Major Features .................................................................................................................... 4 Applications ........................................................................................................................ 4 Standards Supported ......
AGN0912AR-01 802.11b/g MISO BBGW Radio Preliminary Product Details Product Description Airgo Network’s AGN0912AR-01 product design is based on Airgo’s advanced two- receiver AGN103BB and AGN100RF chipset. The product is designed specifically for Broadband Gateways and other similar Access Point applications. Airgo Network’s patented multi-antenna technology yields enhanced range and provides data rates of up to 10 times the competition at the same range.
AGN0912AR-01 802.11b/g MISO BBGW Radio Preliminary Product Details • Major Features • • • • • • • • Highly integrated chipset for IEEE 802.11b and 802.11g standards provides reduced BOM costs, and seamless roaming between all standards Muti-Antenna MISO OFDM technology yields extreme rate and range advantages over other vendor radio implementations Data rates up to 108 Mbps in the 2.4 GHz band within a single channel yield unprecedented throughput and capacity Radio supports the 2.
AGN0912AR-01 802.11b/g MISO BBGW Radio Preliminary Product Details Noise Figure The following table lists the noise figure for the frequency band: Noise Figure (dB) 4.0 Frequency Band 2.4 GHz Output Power Maximum transmitted power shown in the tables below is limited by EVM and performance. In typical end user product operation, actual maximum transmit power will vary based on regulatory requirements.
AGN0912AR-01 802.11b/g MISO BBGW Radio Preliminary Product Details Typical Receiver Sensitivity The following figures depict Rx Sensitivity in dBm as defined in IEEE 802.11 specification(s) 2.4 GHz CCK (8% PER) Data Rate 2Rx 1 -102.5 2 -101.5 5.5 -100.5 11 -97.5 2.4 GHz OFDM (10% PER) Data Rate 2Rx 6 -99.5 9 -97.5 12 -94.5 18 -93.5 24 -89.5 36 -87.5 48 -82.5 54 -81.
AGN0912AR-01 802.11b/g MISO BBGW Radio Preliminary Product Details External Memory Support • • SEEPROM SDRAM (optional) Additional Hardware Features • • • • • • • Hardware based Multicast address filtering Automatic RTS/CTS generation Independent AGC functions for up to 3 receive chains Enhanced Interference Avoidance Beacon Mode hardware support Programmable defer / detect thresholds Automatic transmit gain control compensates for gain.
AGN0912AR-01 802.11b/g MISO BBGW Radio Preliminary Product Details Clips Notch Figure 2 Radio Module Alignment AGN0912AR-01 Antenna Specifications The AGN0912AR-01 provides support for three antennas per radio module. These antennas are connected by way of Hirose connectors. It must be noted that there are no special requirements for the types of antennas used with Airgo’s MIMO technology.
AGN0912AR-01 802.11b/g MISO BBGW Radio Preliminary Product Details Regulatory Product Labeling The AGN0912AR-01 radio transmitter module is authorized only for use in a device where the antenna may be installed such that 20 cm can be maintained between the antenna and the users. End-user products containing AGN0912AR-01 modules MUST have affixed to their labels the following phrase: This product contains FCC ID: SA3-AGN0912AR0100 modules.
AGN0912AR-01 802.11b/g MISO BBGW Radio Preliminary Product Details Physical Dimensions Airgo Networks Inc.