HyperPen USB Tablet Installation Guide 1
C ontents FCC Statement.........................................................................3 EEC Statement.........................................................................4 System Requirements...............................................................5 Contents Checklist.....................................................................6 Tablet Installation HyperPen USB Driver.......................................................7 Software Installation Cadix CyberSign screen saver.......
F CC Statement This equipment generates and uses radio frequency energy and if not installed and used in accordance with the manufacturer’s instructions, it may cause interference to radio and television reception. This equipment has been tested and certified to comply with the limits for a Class B computing device, pursuant to sub-part J of part 15 of FCC Regulation, which are designed to provide reasonable protection against such interference in a residential installation.
E EC Statement This device complies with requirement of EEC directive 89/336/EEC with regard to Electromagnetic Compatibility. Dieses Gerät entspricht den Anforderungen der EEC-Richtlinie 89/336/EEC für elektromagnetische Verträglichkeit. Cet appareil est conforme aux exigences de la directive de la Communauté européenne 89/336/EEC sur la compatibilité électromagnétique. Questo apparecchio è conforme alla direttiva comunitaria 89/336/ CEE relativa alla compatibilità elettromagnetica.
S ystem Requirements IBM compatible PC with 200MHz Pentium processor or higher An available USB port Microsoft Windows 98 32MB RAM CD-ROM Drive Color monitor 5
C ontents Checklist 1 USB TABLET 2 PEN 3 APPLICATION / DRIVER CD 6
T ablet Installation HyperPen USB Driver *For the fastest and easiest installation of the HyperPen tablet,we recommend NOT TO connect your USB tablet until prompted to do so by the HyperPen driver installation. The HyperPen is also supported by Plug and Play. 1 Begin by inserting the autorun installation CD. The following screen appears(Step2). OR If the screen in step 2 does not appear, click Start and choose Run. In the Run dialog box, type “ d” or where your CD drive is located and click OK.
3 Click the HyperPen USB Driver icon . 4 The welcome screen appears, click “ Next”. 5 The driver files will begin to install to the proper location. 6 Installation will prompt you to plug in your USB tablet.
7 Connect the tablet’s USB connector into an available USB port on your computer. 8 Windows will detect your newly installed Aiptek HyperPen USB tablet and will proceed with the final steps of the installation. You have now successfully installed your HyperPen USB tablet.
S oftware Installation Cadix CyberSign 1 Begin by inserting the autorun installation CD. The following screen appears(Step2). OR If the following screen does not appear, click Start and choose Run. In the Run dialog box, type “d:\” where drive is your CD drive and click OK. Then choose Setup icon. 2 The screen below appears. 3 Click the Cadix Signature icon.
4 A Welcome dialog box appears. Click “Next” to start the installation. 5 Choose the tablet you have installed. Click “Next”. 6 Select the directory where you would like Cadix to be installed , or accept the suggested directory. Click “Next”.
7 You can set the Cadix as the default screen saver and click “Yes”, or click “No” to continue. You will see a Done! dialog box. Now the installation is complete! Continue to install the rest of the software provided on the CD. Click on the icon of the program you wish to install and follow the on-screen instructions.