WARNING Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communications.
[2 Chapter 1 Introduction Thanks for your purchase of this easy-to-use data entry device “Tablet”. It is an advanced input device that fully compatible with others’ data device. Tablet is used traditionally by CAD/CAM and graphic professionals.
Chapter 2 system Requirements 80386 CPU and above +M RAM ( 8M RAM or above recommended ) DOS 5.0 or above Windows 3.
Chapter 3 > Hardware Installation Before cabling tablet to your computer system, please familiarize yourself first with all different components of blew packing and computer connectors. The following instruction list describes how © connect the dubiety into your computer, please carefully follow below steps © install the tablet inch your computer. t. Turn off your computer and ail peripherals. 3 . Unplug the keyboard cabin from your computer. .
Chapter 4 Software Installation BACKUP Before you start the software installation procedure, please backup the original utility diskette for the safety reason of storing our original utility diskette in a safe place. Please use the backup copy diskette for the software installation, Installation your environment is Win, it wiv. wad Hyper Pen automatically and show a message in 2 dialog box as “New hardware found”. If not, please go strait to step 3. .
* Chapter 5 Operation Environment The digitize should remain within the following environment during operation: ® 2] to 104 degrees Fahrenheit degree Celsius relative humidity, non-condensing NOTE: Condition higher or lower the range stated above may result in non-operation, CAUTION ! ® Never immerse any part in any fluid/liquid.
“. Chapter 6 Trouble Shooting Tablet LED light ® Make sure the power jack of the Keyboard/Power adapter is plugged into the power socket of the RS-232 Data/Power connector. ® Make sure the male connector of the Keyboard/Power adapter is plugged into the keyboard connector. : @® Check power and RS232C cables are connect property © your system. ® Check your tablet LED dis light on. ® Make sure driver and application software are installed correctly. Make sure the tablet driver is loaded successfully.
A ‘ Specifications Active area (Wx D} Macro cells Physical size (Wx Dx H) Cable length Power consumption Power supply Weight Input current Resolution Accuracy {overall with pen} Maximum Pressure levels Immense reading height Origin position Communication interlace Connector Operating temper. Storage temperature Operating relative Insipidity Swagger relative Humidity Certification Chapter 7 602451524 i111] mm) 12 Macro function keys 14 blocks, wp 10 98 cats) 2316752303 x 7.