User Manual

JP-DVF-RP10

Vandal Resistant Color Video Door Station

with Built in HID

multiCLASS SE

Card Reader

-INSTRUCTIONS-

The JP-DVF-RP10 is a JP Series color video door station with a multiCLASS SE

card reader built

onto the same stainless steel faceplate. The card reader provides electronic access to a building

through a separate Access Control System, which is not supplied by Aiphone.

NAMES & FUNCTIONS:

1. Camera 5. Directory card

2. Microphone 6. Call button

3. LED illuminator 7. multiCLASS reader

4. Speaker

FEATURES:

• All-in-one solution - Communication product &

card reader

• If a card is missing or malfunctioning, audio/video

communication can provide user verication

• Standard Wiegand output to access panel

• Convenience of installing combined components

JP-DVF-RP10

OPTIONAL ACCESSORIES:

• SBX-ISDVFRA - Surface mount stainless steel

backbox

INSTALLATION:

• For ush mounting, cut a hole in the wall and use

supplied back box.

Box dimensions are:

11-1/16” H x 5-13/16” W x 1-3/4” D

• For surface mounting, use the SBX-ISDVFRA

surface mount box. This box can mount to a

standard 1-gang box or to any at surface.

PACKAGE CONTENTS:

JP-DVF-RP10

Vandal-resistant Door Station

Security Driver

Blank name

placard

Back box

& tamper-resistant screws

PAGE 1
JP-DVF-RP10 Vandal Resistant Color Video Door Station with Built in HID® multiCLASS SE® Card Reader -INSTRUCTIONSThe JP-DVF-RP10 is a JP Series color video door station with a multiCLASS SE® card reader built onto the same stainless steel faceplate. The card reader provides electronic access to a building through a separate Access Control System, which is not supplied by Aiphone. NAMES & FUNCTIONS: JP-DVF-RP10 1. Camera 5. Directory card 2. Microphone 6. Call button 2 3. LED illuminator 7.
PAGE 2
WIRING DIAGRAM: JP-DVF-RP10 JP-4MED A1 A2 1A1 1A2 2A1 2A2 PS-2420UL 3A1 3A2 + - + - 4A1 4A2 Connect the reader to the host according to the wiring table below and the host installation guide.