FK1899 A P0713KD 55060 JOS-1A, JOS-1V, JOS-1F HANDS-FREE COLOR VIDEO INTERCOM INTERPHONE VIDEO COULEUR MAINS LIBRES INTERCOMUNICACIÓN CON VÍDEO A COLOR MANOS LIBRES HANDENVRIJE KLEURENVIDEOFONIE VIDEOCITOFONO A COLORI A VIVAVOCE FREISPRECH-FARBVIDEO-SPRECHANLAGEN-HAUPTSTELLE INSTALLATION & OPERATION MANUAL MANUEL D’INSTALLATION ET D’UTILISATION MANUAL DE INSTALACIÓN Y OPERACIÓN INSTALLATIE- EN BEDIENINGSHANDLEIDING MANUALE D'INSTALLAZIONE E USO INSTALLATIONS- UND BEDIENUNGSANLEITUNGHANDBUCH JOS-1A JO-DA V
PRECAUTIONS English Prohibited Do not dismantle unit WARNING Negligence could result in death or serious injury. 1. Do not dismantle or alter the unit. Fire or electric shock could result. 2. Keep the unit away from water or any other liquid. Fire or electric shock could result. 3. High voltage is present internally. Do not open the case. Electric shock could result. Français 4. Do not connect any non-specified power source to the +, - terminals.
Package contents jos-1V jos-1F English jos-1a jo-1md Main unit Français Front panel jo-da Español jo-dV Nederlands Flush mount back box Special screw x4 jo-dvf Italiano Manual Special screwdriver (Hexagonal wrench) Transparent name plate x2 Deutsch Special screwdriver NOTES: • Mounting and Wood mounting screws not included • For details on the power supply, see the installation manual separately.
PART names Remove protective film before use. Volume control button [During standby] Adjust the calling volume. Volume adjustment range: (mute), [During communication or monitoring] Adjust the communication volume. Volume adjustment range: - English jo-1md Color LCD screen Displays camera images during door station call-ins, communication with door station, and door station monitoring Status LED (orange) Indicates the current status of this station by lighting up or blinking.
installation Cable Never use individual conductors, twisted pair cable, or coaxial cable. English Use PE (polyethylene)-insulated PVC jacket cable. Parallel or jacketed 2-conductor, mid-capacitance, non-shielded cable is recommended. Wiring method, wiring distance JO-DA A JO-DV JO-1MD 165' 100 m 330' B 5m 16' 10 m 33' C 50 m 165' 150 m 495' IER-2 C Español B 50 m JO-DVF PS18 Français Ø 0.65 mm 22 AWG Ø 0.8-1.
mounting jo-1md English 1 Fasten the mounting bracket to the wall 3-gang box Français Wires 83.5mm (3-5/16") Español Mounting bracket (attached to the unit with shipment) 2 Mount the unit on the mounting bracket. Nederlands 3 Mounting screw × 4 (Screw shaft: Ø4.1) (Slotted Head: Ø8.2 or less Height 3.0mm or less) (not included) 1. Press release button to insert or remove wire. 2. Insert wire into the terminal.
jo-da 1 Remove the main unit from the mounting frame by loosening the locking screws Mounting screw x 2 Place " (Screw shaft: Ø4.1) (Slotted Head: Ø8.2 or less Height 3.0mm or less) (not included) UP" upwards Flathead screwdriver Loosen 83.5 mm (3-5/16") 2 Main unit Pry off the front panel with a flathead screwdriver. Mounting screw x 2 (Screw shaft: Ø4.1) (Slotted Head: Ø8.2 or less Height 3.0mm or less) (not included) Drainage hole Do not block the holes. 83.
Wiring Insert wires securely into each terminal as shown. English Video door station Master monitor station JO-DA Français JO-DV JO-DVF A1 A2 JO-1MD 2 Español NP 2 NP Electric door strike AC transformer Nederlands EL-12S Door release An EL-12S (AC 12 V, 0.125 A, DC 12 V, 0.2 A) or equivalent part and a separate AC transformer (or power supply) are required. Door release contact: AC/DC 24 V, 0.5 A (Minimum contact: 100 mV DC, 0.1 mA) (N/O dry closure contact L, L).
Operations Answering a door call 2 The call tone sounds, an image appears on screen. 3 Push 4 After finishing communication, push • The screen turns off after approx. 45 seconds if not answered. , and after the beep, communicate hands-free (hands-free mode). and communication For loud outdoor areas, use Press-to-Talk mode (PTT) 1 Press and hold for 2 seconds or more. After approx. 2 seconds beep sounds, PTT mode is engaged. is pressed briefly, PTT mode is not engaged.
Français English Monitoring door station 1 Push 2 The video image from the door station and the incoming audio is heard. If you do not push , the caller will not hear sounds from the inside station. 3 Push in standby mode. to end monitoring. Notes: Español • To talk to door station during monitoring, momentarily push This allows communication with the door station. • The monitoring turns off automatically after approx. 1 minute. .
Adjust screen brightness 1 Push when the screen is difficult to see. The screen brightness changes from [ 1] (the darkest) to [ 5] (the brightest) during communication or monitoring. English NOTES: • The current brightness level is displayed on the screen and disappears in approx. 5 seconds. • The default setting is [ 3]. Activating/Triggering external devices (if installed) Press to operate to the unit’s option output. NOTES: • Optional devices must be installed and connected properly.
memo 63
WARRANTY English Aiphone warrants its products to be free from defects of material and workmanship under normal use and service for a period of two years after delivery to the ultimate user and will repair free of charge or replace at no charge, should it become defective upon which examination shall disclose to be defective and under warranty.
