J O-1 M DW Master monitor station OPERATION MANUAL Read this "Operation Manual" prior to usage to ensure safe and correct operation. Keep this in a safe place for future reference. The illustrations used in this manual may differ from the actual ones.
PRECAUTIONS Prohibited Do not dismantle unit Keep unit away from water Be sure to follow the instruction 7. In order to prevent sensitive information stored in the station from being lost or stolen, it is the customer's responsibility to delete settings, recorded video/audio, and other information stored in the station, when discarding, transferring, or returning the station. Refer to page 24, 25 and 35 of this manual for how to erase the information. 8.
Table of Contents PRECAUTIONS .......................................................... 2 SETTINGS Settings list ........................................................................ 29 PREPARATION Adjusting screen brightness......................................... 30 System con¿guration........................................................ 4 Changing the sound settings ....................................... 31 Adjusting receiving volume ..........................................
PREPARATION System configuration The ¿gure below is a system con¿guration example. : Hard wired : Wireless Mobile device Mobile device Electric lock 無線 LAN ルーター Call extension speaker IER-2 Internet Wireless LAN router JO-DA JO-DV Mobile device 親機 呼出 住宅用火災警報器または PS18 コールボタン JO-DVF Master monitor station JO-1MDW Video door station External unit such as lighting equipment Maximum number of each device available in a system Device Max.
PREPARATION Part names and functions Operation panel Remove protective film before use. Color LCD touchscreen See the next page for details. Wireless LAN antenna B Wireless LAN antenna A Button position guide for the visually-impaired ed Button position guide for the visually-impaired RESET button Press this button to reboot the station when it is not responding. microSD card slot (ĺP. 8) Speaker M Microphone Noti¿cation LED Indicates the current status of the station by lighting up or Àashing.
PREPARATION How to read screen The screen of the station is a touchscreen. Simply tap the icons or buttons displayed on the screen. The following are examples of typical screens and icons. * The displayed screens and icons may differ depending on the devices connected to this system. ■ MENU screen This screen appears when the monitor is turned on. Recording List (ĺP. 24) gs. Tap this to play recordings. * This icon blinks when there is a recording that has not been played yet.
PREPARATION I nit ia l se t -up ■ To correct date and time Setting the current date and time When the station is powered up for the ¿rst time, set the current date and time. 1 Correct the current date and time any time by following the procedure below. If the monitor is oႇ, tap the screen to turn on the MENU screen. ĺ Date/Time 1 From the MENU screen, tap ĺ Current Time . 2 Set the month, day, year, hour, and minute or . individually by tapping 3 When the setting has ¿nished, tap 9 .
PREPARATION Pre pa ring a m ic roSDH C c a rd About microSDHC card Inserting/removing a microSDHC card NOTE: Be sure to insert or remove a microSDHC card when the station is in standby mode, and not communicating with video door station. A microSDHC card is not included with the station. Choose a microSDHC card using the recommended speci¿cations below.
PREPARATION Formatting a microSDHC card MicroSDHC card may require to be formatted when used with the station for the ¿rst time. * Previously formatted microSDHC card may not work with the station. Be sure to format a microSDHC card using the station. * Note that formatting a microSDHC card deletes all existing data. 1 From the MENU screen, tap ĺ Other Settings . ĺ > 1 2 3 A message will appear asking whether or not to proceed. 2 To continue formatting a microSDHC card, tap 9 .
PREPARATION Conne c t ing w it h a m obile devic e Flow of the settings The following settings are needed to establish a connection link with a mobile device. Connect the station with Wi-Fi. (ĺ P. 11) Connect a mobile device with the Wi-Fi. (See the instruction manual of each mobile device.) Register a mobile device to the station. (ĺ P. 17) NOTE: • Prepare a commercially available Wi-Fi router for connecting the system to the internet. A Wi-Fi router is not included with this product.
PREPARATION Connecting the station with Wi-Fi 4 There are two connecting methods available. Press the WPS button on the Wi-Fi router, and then tap 9 . • Auto Connect (WPS) • Manual Setup Connecting using "Auto Connect (WPS)" Connection between the master monitor station and wireless router is established automatically. (In some This method connects to a Wi-Fi network using the "Wi-Fi Protected SetupTM" function of a router/STB. Select this method when it is not required detailed settings.
PREPARATION z When searching for SSID 1 From the MENU screen, tap ĺ Other Settings . z When inputting SSID manually ĺ 1 > A message will appear asking whether or not to proceed. 2 To continue con¿guring the settings, tap 3 Tap Network ĺ 9 9 From the MENU screen, tap ĺ Other Settings . ĺ > A message will appear asking whether or not to proceed. . ĺ Manual Setup . 2 To continue con¿guring the settings, tap 3 Tap Network ĺ OTHER SETTINGS 1 / 2 9 9 ĺ Manual Setup .
PREPARATION Number of registerd Apps con¿rmation message 2 Setting IP address 1 From the MANUAL SETUP screen, tap IP Address . When connecting to the network for the ¿rst time, delete registered apps (ĺ P. 19) before making setting changes. The setting items will be shown. 2 Con¿gure the settings for each item. * Tap 3 > or < to change the page of the item list. Item Description IP Select the IP version (v4 or v6) and the setting method (Auto or Manual).
PREPARATION Connection check 1 Con¿rming the current network settings From the MENU screen, tap ĺ Other Settings . ĺ Con¿rm the current network settings when the network connection is unstable. > 1 A message will appear asking whether or not to proceed. 2 To continue con¿guring the settings, tap 3 Tap Network ĺ 9 9 . microSDHC card Video Quality Station Information Network Default User Settings ĺ > A message will appear asking whether or not to proceed. ĺ Manual Setup .
PREPARATION Enabling or disabling the network connection Selecting the antenna Antenna of the station can be selected according to the reception status or the location of the station or Wi-Fi router. If necessary, disable or enable the network connection. 1 From the MENU screen, tap ĺ Other Settings . ĺ 1 > To continue con¿guring the settings, tap 3 Tap Network ĺ 9 ĺ Network Advanced Settings ĺ Wi-Fi . 9 ĺ > A message will appear asking whether or not to proceed.
PREPARATION Using the keyboard Full keyboard Alphanumeric input mode (lower case) Cursor (yellow highlight) Backspace key Cancel and return to the previous screen. Applies the inputted value and closes the keyboard Switches to the alphanumeric input mode (upper case). Moves the cursor Symbol input mode Alphanumeric input mode (upper case) Switches to the alphanumeric input mode (lower case). Switches to the symbol input mode.
PREPARATION Registering a mobile device to the station Connecting a mobile device with a Wi-Fi router Registering a mobile device to the station, the mobile device must be connected to the same Wi-Fi router as the one connected to the station. Refer to the instruction manual of the mobile device for how to connect the mobile device to a Wi-Fi router. Operation with a mobile device 1 Run the INTERCOM APP Type B from the icon on the Home screen. 2 3 Allow this app to send noti¿cations.
PREPARATION Operation with the station 6 ĺ From the MENU screen, tap ĺ Other Settings . Operation with a mobile device > 11 Tap Start . A message will appear asking whether or not to proceed. 9 7 To continue con¿guring the settings, tap 8 Tap Register / Delete Apps ĺ Register Apps . 9 Tap the location, and tap 9 . . One-time password will be shown on the master monitor station.
PREPARATION 16 Try to receive a call from the door station. Con¿rmation with the station • If you will perform an operation con¿rmation after the registration has been completed, ¿rst return to the MENU screen. 12 Con¿rm the one-time password. • For more information on using the app and detailed settings, refer to the instructions provided with the app. • To register another mobile device, repeat the process starting at step 1. Deleting the mobile device from the station.
USING THE STATION Receiving a call When receiving a call from a door station • The ringtone sounds. • The video at the door station is displayed. • Automatic recording begins. Answering a call ■ To answer the call ■ To end the communication 1 Tap Tap 2 Speak to the visitor. . . Other features * Speaking simultaneously may cause intermittent audio. * Talk duration is 60 seconds by default. It can be • Screen brightness and receiving volume can be adjusted adjusted up to 180 seconds. (ĺ P.
USING THIS STATION Operation during receiving a call or communication Changing the display to the full-screen mode Adjusting the screen brightness 1 Tap . Tap The brightness adjusting bar will be shown. 2 . The display size is extended and the icons are hidden from the screen. Tap + to adjust the screen brighter, and to adjust the screen darker. ■ To restore the normal display mode. Tap the screen. The default value is 3, with a minimum of 1 and a maximum of 5.
USING THIS STATION Communication using touch-to-talk Recording Touch-to-talk is a method of communication in which manual control of incoming and outgoing audio is used. Touch-to-talk is recommended in loud or noisy environments. Tap ■ Automatic recording The station automatically records video and sounds at the door station after the elapse of a certain period of time after receiving a call. . While recording, changes to REC . * The recording time is up to 10 seconds.
USING THIS STATION Monitoring the door station 1 From the MENU screen, tap . Video and audio from the door station will be received at the master monitor station. * Audio from the master monitor station is muted. 2 To end monitoring, tap . * The monitoring will end automatically after the elapse of about 60 seconds from the start of monitoring. Available functions during monitoring • : Talk (ĺ P. 20) • : Door release (ĺ P. 20) • REC : Manual recording (ĺ P.
USING THIS STATION Playing recordings Screens and icons ■ Recording list The recordings are shown in order. * When a microSDHC card is installed, only the recordings in a microSDHC card will be shown. To display the recordings stored in the built-in memory, remove the microSDHC card. : Shows this recording is not protected. Tap this to protect this recording. : Shows this recording is protected. (ĺP. 25) Tap this to cancel the protection.
USING THIS STATION Playing recordings Protecting recordings Protect recordings from being accidentally overwritten. 1 . From the MENU screen, tap To protect a recording on the recording list 1 From the MENU screen, tap . The recording list screen will be shown. 2 The recording list screen will be shown. 2 Tap the recording to view. : Shows this recording is protected. Tap this to cancel the protection. : Shows this recording is not protected.
USING THIS STATION ■ To cancel the protection of the currentlyselected recording Deleting a recording NOTE: 1 While in standby, tap 2 Tap OFF . Protect A protected recording cannot be deleted. To delete, the protection must be removed. . To delete a recording ON OFF ■ To delete a recording from the recording list 1 will disappear to show the selected recording is no longer protected. On the recording list, tap icon of the recording to delete.
USING THIS STATION To delete all recordings Copying recordings from the built-in memory onto a microSDHC card Deleting all the recordings can be performed separately to microSDHC card and the built-in memory. 1 Insert the microSDHC card into the master monitor station. 1 To delete all the recordings in the built-in memory, remove any microSDHC card inserted in the master monitor station. 2 On the recording list, tap From the MENU screen, tap ĺ Other Settings .
USING THIS STATION Notification Checking for updates. 1 From the MENU screen, tap . The notification list will be shown. 2 Tap Check of the noti¿cation to view. The details of the notification will be shown. * The mark shows this noti¿cation has not been con¿rmed.
SETTINGS Settings list The following are all of the available settings. These settings can be adjusted at any time. Item Brightness Volume Date / Time Relevant page Details Adjusts the screen brightness. 30 Receive Adjusts the receiving volume. 31 Ringtone Adjusts the incoming ringtone volume. 31 Touch sounds Enables or Disables the touch sound made whenever the touchscreen is used. 31 Current Time Sets the current date and time.
SETTINGS Adjusting screen brightness 1 Settings 1 to 5 Default 3 From the MENU screen, tap . The SETTINGS 1/2 screen will be shown. 2 Tap Brightness . The brightness adjusting bar will be shown. 3 Tap + to adjust the screen brighter, and to adjust the screen darker. 4 Tap 9 to apply changes.
SETTINGS Changing the sound settings Adjusting receiving volume 1 Settings 1 to 3 Default 2 From the MENU screen, tap ĺ Receive . Enabling/Disabling the touch sound Enable (ON) or disable (OFF) the touch sound made whenever the touchscreen is used. ĺ Volume The volume adjusting bar will be shown. 2 3 Tap + to adjust the volume higher, and adjust the volume lower. Tap 9 Adjusting ringtone volume 1 Settings 0 to 3 Default 2 From the MENU screen, tap ĺ Ringtone .
SETTINGS Changing the time settings Setting the current date and time 3 (ĺ P. 7) Tap 9 to apply changes. * When one of the following time zone is set, the daylight saving time setting is automatically applied, so set Daylight Saving Time to None (ĺ P. 33). Selecting the display format of the date and time List of time zones (GMT-10:00) Alaska (Adak) Select the display format of the date and time on the screen. (GMT-09:00) Alaska (GMT-08:00) Paci¿c Standard Time (U.S.
SETTINGS Setting daylight saving time Changing the display language Set whether to utilize daylight saving time (+1(h)) or not (None). (ĺ P. 7) Settings Description None Daylight saving time is not utilized. +1(h) Daylight saving time is utilized for 1 hour. From the MENU screen, tap ĺ Daylight Saving Time . 2 Set whether to utilize daylight saving time. 3 Tap 9 Setting the talk duration time ĺ Date/Time 1 Settings 60 sec./180 sec. Default 60 sec.
SETTINGS Setting of door release/option Setting of notification LED Set whether to display the door release icon and option output icon on the MENU screen. 1 Set whether to display (ON) the noti¿cation LED when a new noti¿cation arrives. Door release Option output Settings ON/OFF Settings Enable/Disable Enable/Disable Default ON Default Enable Enable From the MENU screen, tap ĺ Door release / Option . ĺ 1 > From the MENU screen, tap ĺ Noti¿cation LED .
SETTINGS Other settings ATTENTION: While configuring the settings in "Other Settings", the station will not respond to an incoming call and will not sound ringtone. Registering/Deleting a mobile device 3 Tap Video Quality . OTHER SETTINGS 1 / 2 • Downloading the App to the mobile device (ĺ P. 17) • Registering a mobile device to the station (ĺ P. 17) • Deleting the mobile device from the station (ĺ P.
SETTINGS Con¿guring the settings for automatically updating the station Viewing station information View a noti¿cation for updating the ¿rmware of the station. If an update is available, continue to update the station. It is also possible to con¿gure the settings to automatically update the station. * To enable the automatic update, the station must be connected to the network. The station and the server will communicate periodically for updating.
SETTINGS Con¿guring network settings • • • • Con¿rming the related regulations Connecting using "Auto Connect (WPS)" (ĺ P. 11) Connecting using "Manual Setup" (ĺ P. 11) Con¿rming the current network settings (ĺ P. 14) Other Wi-Fi settings (ĺ P. 15) 1 This will reset all the settings to default, except for the following. 2 To continue, tap 3 Tap memory ĺ > > 9 . ĺ Regulatory .
SETTINGS Setting Door Release duration Administrator settings These settings had been completed at the system installation. Do not change the settings. Exporting the log ¿le to the microSDHC card 1 From the MENU screen, tap ĺ Other Settings . ĺ 1 To continue, tap 3 Tap > 9 1 to 30 (sec.) Default 5 From the MENU screen, tap ĺ > ĺ Other Settings . > A message will appear asking whether or not to proceed. A message will appear asking whether or not to proceed. 2 Settings .
SETTINGS Restoring all settings to the factory default Setting Option Output duration 1 Settings 1 to 30 (sec.) Default 5 * This operation also deletes all the recordings including protected ones. From the MENU screen, tap ĺ Other Settings . ĺ 1 > To continue, tap 3 Tap > 9 ĺ > A message will appear asking whether or not to proceed. A message will appear asking whether or not to proceed. 2 From the MENU screen, tap ĺ Other Settings . . ĺ Administrator Settings .
FOR PROPER USE OF THE STATION Updating a firmware of the station The ¿rmware of the station must be updated periodically. The following methods are available for updating. • Automatic update through the network. • Receiving a noti¿cation for available updates through the network. • Updating the station by using a microSDHC card on which the newest version of the ¿rmware is stored. NOTE: For selecting the updating method, see "Configuring the settings for automatically updating the station" (ĺ P.
FOR PROPER USE OF THIS STATION 3 Updating the station by using a microSDHC card on which the newest version of the ¿rmware is stored 9 . The updating begins. When "The ¿rmware has been updated. The station will restart in 5 sec." is shown, the updating has been completed, and the station reboots after 5 seconds. Use this method when the station is not connected to the network. In advance, download the newest version of the ¿rmware from the Aiphone website to a microSDHC card.
FOR PROPER USE OF THIS STATION Troubleshooting If issues with the station occur, refer to the following information to determine whether the issue can be corrected by the suggested testing and solutions. For further help and assistance, contact your installer or service provider. Problem Cause Solution Page The screen is black. The monitor is oႇ in standby mode. The monitor turns on by touching the screen. Install the door station in a location where it is not pointing direct sunlight.
FOR PROPER USE OF THIS STATION Specifications Power supply DC18V (from power supply) Mounting Wall-mount Current consumption (MAX) Approx. 450mA Material Self-extinguishing resin Hands-free (Auto-voice actuation) Color White Touch-to-talk Dimensions 155 (H) × 210 (W) × 27 (D) (mm) 6-1/8 (H) × 8-1/4 (W) × 1-1/16 (D) (inches) Mass Approx. 620 g (1.37 lbs.) Communication Ambient temperature 0 - 40°C (32°F - 104°F) Wirelss LAN interface IEEE802.
FOR PROPER USE OF THIS STATION Supplier’s Declaration of Conformity 47CFR §2.1077 Compliance Information Unique Identi¿er: Trade Name : AIPHONE Model : JO-1MDW, JO-1MDW V2 Responsible Party – U.S. Contact Information Company Name : AIPHONE CORPORATION Location of Oႈce : 6670 185th Ave NE, Redmond, WA, 98052, USA Telephone Number : (800) 692-0200 Email Address : tech@aiphone.com Website : https://www.aiphone.com/home FCC Compliance Statement This device complies with Part 15 of the FCC Rules.
FOR PROPER USE OF THIS STATION Warranty Aiphone warrants its products to be free from defects of material and workmanship under normal use and service for a period of 2 years after delivery to the ultimate user and will repair free of charge or replace at no charge, should it become defective upon which examination shall disclose to be defective and under warranty.
