GT-1C7W/GT-1C7W-L Residential/Tenant Station OPERATION MANUAL Be sure to read this document (Operation Manual) in advance to use the product in the proper manner. Keep this in a safe place for future reference. The illustrations and images used in this manual may differ from the actual items.
PRECAUTIONS Prohibited Do not dismantle unit Keep unit away from water Be sure to follow the instruction General Precautions WARNING (Negligence could result in death or serious injury.) 1. Read this manual prior to usage to ensure safe and correct operation. Keep this in a safe place for future reference. 1. Do not disassemble or modify the station. This may result in fire or electrical shock. 2. Keep the station away from flammable materials. This may result in fire or electrical shock. 2.
• Aiphone assumes no responsibility for corruption of saved information (such as changes to or deletion of saved information). Be aware of this in advance. • If there is no power for 15 minutes or more, the date and time return to default. • This station is not meant to protect lives or property. Aiphone is not to be held responsible for any and all resulting serious accidents, disaster accidents, or physical damage.
Table of Contents To delete a recording ........................................................... 31 To delete all recordings ....................................................... 32 PRECAUTIONS .......................................................... 2 Copying recordings from the built-in memory onto a microSDHC card................................................ 32 PREPARATION Emergency alarm .............................................................
PREPARATION Part names and functions Operation panel Remove protective film before use. Color LCD touchscreen See the next page for details. Wireless LAN antenna B Wireless LAN antenna A RESET button Press this button to reboot the station when it is not responding. microSDHC card slot (ĺP. 8) Speaker Microphone M Noti¿cation LED (Orange) Indicates the current status of the station by lighting up or Àashing. Station status Rebooting. Updating the ¿rmware. Indication pattern Lit (0.75 sec.
PREPARATION How to read screen The screen of the station is a touchscreen. Simply tap the icons or buttons displayed on the screen. The following are examples of typical screens and icons. * The displayed screens and icons may differ depending on the devices connected to this system. ■ MENU screen Displayed when a microSDHC card is installed and available. This screen appears when the monitor is turned on. Displayed when the ringtone is set to mute. Recording List (ĺP. 29) Tap to play recordings.
PREPARATION Initial set-up Setting the current date and time 6 When the station is powered up for the ¿rst time, set the current date and time. 1 Set the day, month, year, hour, and minute individually by taping or . If the monitor is oႇ, tap the screen to turn on the LANGUAGE 1/2 screen. Day 7 Month Year Hour Minute When the setting has ¿nished, tap 9 .
PREPARATION Preparing a microSDHC card About microSDHC card Inserting/removing a microSDHC card NOTE: Be sure to insert or remove a microSDHC card when the station is in standby mode, and not communicating with entrance station or guard station. A microSDHC card is not included with the station. Choose a microSDHC card using the recommended speci¿cations below.
PREPARATION Formatting a microSDHC card MicroSDHC card may require to be formatted when used with the station for the ¿rst time. * Previously formatted microSDHC card may not work with the station. Be sure to format a microSDHC card using the station. * Note that formatting a microSDHC card deletes all existing data. 1 From the MENU screen, tap ĺ Other Settings . ĺ > 1 2 3 A con¿rmation message will be shown.
PREPARATION Connecting with a mobile device Flow of the settings The following settings are needed to establish a connection link with a mobile device. Connect the station with Wi-Fi. (ĺ P. 11) Connect a mobile device with the Wi-Fi. (See the instruction manual of each mobile device.) Register a mobile device to the station. (ĺ P. 17) NOTE: • Prepare a commercially available Wi-Fi router for connecting the system to the internet. A Wi-Fi router is not included with this product.
PREPARATION Connecting the station with Wi-Fi 4 There are two connecting methods available. Press the WPS button on the Wi-Fi router, and then tap 9 . • Auto Connect (WPS) • Manual Setup • Wi-Fi (Search SSID) • Wi-Fi (Manual Setup) • IP Address Connection between the residential/tenant station and Wi-Fi router is established automatically. (In some cases, it Connecting using "Auto Connect (WPS)" may be necessary to tap 9 before pressing the WPS button on the wireless router.
PREPARATION z Searching SSID z When inputting SSID manually 1 * The SSID of a router with the SSID stealth mode will not be displayed. 1 ĺ From the MENU screen, tap ĺ Other Settings . ĺ > > A con¿rmation mesage will be shown. A con¿rmation screen will be shown. 2 To continue con¿guring the settings, tap 3 Tap Network ĺ 9 From the MENU screen, tap ĺ Other Settings . 9 . 2 To continue con¿guring the settings, tap 3 Tap Network ĺ 9 9 . ĺ Manual Setup . ĺ Manual Setup .
PREPARATION 2 Setting IP address 1 Number of registerd Apps con¿rmation message From the MANUAL SETUP screen, tap IP Address . When connecting to the network for the ¿rst time, delete registered apps (ĺ P. 20) before making setting changes. The setting items will be shown. 2 Con¿gure the settings for each item. * Tap > or < to change the page of the item list. Item Description IP Select the IP version (v4 or v6) and the setting method (Auto or Manual).
PREPARATION Connection check 1 Con¿rming the current network settings From the MENU screen, tap ĺ Other Settings . ĺ Con¿rm the current network settings when the network connection is unstable. > 1 A con¿rmation screen will be shown. 2 To continue con¿guring the settings, tap 3 Tap Network ĺ 9 9 . From the MENU screen, tap ĺ Other Settings . ĺ > A con¿rmation screen will be shown. ĺ Manual Setup . 2 To continue con¿guring the settings, tap 3 Tap Network ĺ 9 9 . ĺ Status .
PREPARATION Enabling or disabling the network connection Selecting the antenna If necessary, disable or enable the network connection. Antenna of the station can be selected according to the reception status or the location of the station or Wi-Fi router. 1 1 From the MENU screen, tap ĺ Other Settings . ĺ > From the MENU screen, tap ĺ Other Settings . ĺ > A con¿rmation screen will be shown. A con¿rmation screen will be shown.
PREPARATION Using the keyboard Full keyboard Alphanumeric input mode (lower case) Cursor (yellow highlight) Backspace key Cancel and return to the previous screen. Applies the inputted value and closes the keyboard Switches to the alphanumeric input mode (upper case). Moves the cursor Symbol input mode Alphanumeric input mode (upper case) Switches to the alphanumeric input mode (lower case). Switches to the symbol input mode.
PREPARATION Registering a mobile device to the station Connecting a mobile device with a Wi-Fi router Registering a mobile device to the station, the mobile device must be connected to the same Wi-Fi router as the one connected to the station. Refer to the instruction manual of the mobile device for how to connect the mobile device to a Wi-Fi router. Operation with a mobile device 1 Run the AIPHONE Type GT from the icon on the Home screen. 2 3 Allow this app to send noti¿cations.
PREPARATION 5 10 Select Agree Read the screen for the End User Licence Agreement carefully and tap Next . or Disagree and tap 9 . * AIPHONE Type GT cannot be used without the End User License Agreements. The following message will be shown. Read the message, and proceed to the mobile device operation. Operation with the station 6 ĺ From the MENU screen, tap ĺ Other Settings . > A con¿rmation screen will be shown.
PREPARATION If the following error message appears Operation with a mobile device You need to register the mobile device to the residential/ tenant station manually as follows. 1 13 Enter the one-time password displayed on the screen of the station within the expiration time, and tap Next . Tap OK to close the error message. Enter one-time password. 2 Uncheck the check box, and tap Start . 1 2 14 Enter the user name of the mobile device and tap Register . 3 Name is limited to 12 characters.
PREPARATION Deleting the mobile device from the station. 1 From the MENU screen, tap ĺ Other Settings . ĺ > A con¿rmation screen will be shown. 9 2 To continue con¿guring the settings, tap 3 4 Tap Register / Delete Apps ĺ Delete Apps . . Tap the mobile device to delete. * The 7th and 8th mobile devices will be shown on the next page. Tap > to change the page. The con¿rmation message will be shown. 5 To delete App, tap 9 . When "App has been deleted.
USING THE STATION Receiving a call When receiving a call from a entrance station or guard station • The ringtone sounds. • Video is displayed if the call is placed from a video entrance station. • Automatic recording begins. Answering a call ■ To answer the call ■ To end the communication 1 Tap Tap 2 Speak to the visitor. . . Other features * Speaking simultaneously may cause intermittent audio. * You can speak for approx. 60 seconds. * Hearing aid with T mode is available.
USING THIS STATION Operation during receiving a call or communication Releasing the door While being called or communicating, tap Activating doctor call If doctor call (automatic entry) is active, the door release relay will activate on the entrance station when the call is placed to the residential/tenant station. . ■ To enable doctor call. * Available only when an electric door lock is installed at the entrance and connected to this system.
USING THIS STATION Changing the display to the full-screen mode Pan/tilt operation When in zoom view, tap Tap on the center of the screen. The icons will be hidden from the screen. ■ To restore the normal display mode. Tap the screen. Zoom In/Zoom Out Tap to zoom in, and touch to zoom out. NOTE: • The zoomed view can be moved up, down, left, and right. (ĺ Pan/ tilt operation) • Surveillance camera image cannot be switched between zoom and wide view.
USING THIS STATION ■ Manual recording Recording Video can be manually recorded during communication. ■ Automatic recording Tap The station automatically records video at the entrance station after the elapse of a certain period of time after receiving a call. While recording, changes to when a video is displayed. * Manual recording is possible only when is shown on the screen. * The recording quality is the same as automatic recording. . * The recording time is up to 10 seconds.
USING THIS STATION Communication using touch-to-talk Adjusting the screen brightness Touch-to-talk is a method of communication in which manual control of incoming and outgoing audio is used. Touch-to-talk is recommended in loud or noisy environments. While in communication, tap 1 Tap . . The brightness adjusting bar will be shown. The touch-to-talk method will be enabled. To speak, tap The 2 . will change to Tap + to adjust the screen brighter, and to adjust the screen darker. .
USING THIS STATION Turning on/oႇ visibility enhancement Turning on/oႇ the light control If the video on the screen is hard to see due to backlight in the daytime or darkness at night, turn on the visibility enhancement. When the light control is active, the installed light equipment near the entrance will be lit during receiving a call from the entrance station or monitoring the entrance station. ■ To turn on the visibility enhancement ■ To turn on the light control 1 Tap . 1 Tap . 2 Tap .
USING THIS STATION Switching to surveillance camera video image * This feature can be used only when a surveillance camera is installed. Switch the video image at between the entrance station and the surveillance camera. 1 Tap when video image at the entrance station is displayed. 2 Tap . The video image will switch to the surveillance camera video image. ■ To return to the video image at the entrance station Tap again. NOTE: • This may not be available depending on the installed system.
USING THIS STATION Monitoring the entrance station 1 From the MENU screen, tap 2 Tap the entrance station to monitor. Calling the guard station 1 . Tap . The guard station will receive a call and the following screen will be shown. Video and audio from the entrance station will be received at the residential/tenant station. 2 Speak when the guard answers. * If there is no answer, touch to call the guard station again.
USING THIS STATION Playing recordings Screens and icons ■ Recording list The recordings are shown in order. * When a microSDHC card is installed, only the recordings in a microSDHC card will be shown. To display the recordings stored in the built-in memory, remove the microSDHC card. : Shows this recording is not protected. (ĺP. 30) Tap this to protect this recording. Recorded date and time tal pages of the list Current page/the total : Shows this recording is protected. (ĺP.
USING THIS STATION Playing recordings Protecting recordings Protect recordings from being accidentally overwritten. 1 From the MENU screen, tap . To protect a recording on the recording list 1 From the MENU screen, tap . The recording list screen will be shown. 2 The recording list screen will be shown. 2 Tap of the recording to protect. Tap the recording to view. : Shows this recording is protected. Tap this to cancel the protection.
USING THIS STATION ■ To cancel the protection of the currentlyselected recording Deleting a recording NOTE: 1 While in standby, tap 2 Tap OFF . Protect A protected recording cannot be deleted. To delete, the protection must be removed. . To delete a recording ON OFF ■ To delete a recording from the recording list 1 will disappear to show the selected recording is no longer protected. On the recording list, tap icon of the recording to delete.
USING THIS STATION To delete all recordings Copying recordings from the built-in memory onto a microSDHC card Deleting all the recordings can be performed separately to microSDHC card and the built-in memory. 1 Insert the microSDHC card into the residential/ tenant station. 1 To delete all the recordings in the built-in memory, remove any microSDHC card inserted in the residential/tenant station. 2 On the recording list, tap From the MENU screen, tap ĺ Other Settings .
USING THIS STATION Emergency alarm When the emergency alarm switch is pressed and locked (or when there is a line - oႇ trouble) • An alarm will sound. • A warning signal will be sent to the guard station. • An emergency screen will be displayed. p Beeep e B ep Be Noti¿cation LED When receiving a call from the guard station ■ To end the communication The screen below appears, and the alarm will change to a ringtone. * The noti¿cation LED Àashes. Tap .
USING THIS STATION Notification The following noti¿cations can be checked. • Date and time are not set. • The ¿rmware can be updated. 1 From the MENU screen, tap . The notification list will be shown. 2 Tap Check of the noti¿cation to view. The details of the notification will be shown. * The mark shows this noti¿cation has not been con¿rmed.
SETTINGS Settings list The following are all of the available settings. These settings can be adjusted at any time. Item Brightness Volume Date / Time Details Relevant page Adjusts the screen brightness. 36 Receive Adjusts the receiving volume. 37 Ringtone Adjusts the incoming ringtone volume. 37 Touch Sounds Enables or Disables the touch sound made whenever the touchscreen is used. 37 Current Time Sets the current date and time.
SETTINGS Adjusting screen brightness 1 Settings 1 to 5 Default 3 From the MENU screen, tap . The SETTINGS 1/2 screen will be shown. 2 Tap Brightness . The brightness adjusting bar will be shown. 3 Tap + to adjust the screen brighter, and to adjust the screen darker. 4 Tap 9 to apply changes.
SETTINGS Changing the sound settings Adjusting receiving volume 1 Settings 1 to 3 Default 2 From the MENU screen, tap ĺ Receive . Enabling/Disabling the touch sound Enable (ON) or disable (OFF) the touch sound made whenever the touchscreen is used. ĺ Volume The volume adjusting bar will be shown. 2 3 Tap + to adjust the volume higher, and adjust the volume lower. Tap 9 Adjusting ringtone volume 1 Settings 0 to 3 Default 2 From the MENU screen, tap ĺ Ringtone .
SETTINGS Changing the time settings 9 Setting the current date and time 3 (ĺ P. 7) * When one of the following time zone is set, the daylight Tap to apply changes. saving time setting is automatically applied, so set Daylight Saving Time to None (ĺ P. 39). Selecting the display format of the date and time List of time zones (GMT-10:00) Alaska (Adak) (GMT-09:00) Alaska Select the display format of the date and time on the screen. (GMT-08:00) Paci¿c Standard Time (U.S.
SETTINGS Setting daylight saving time Changing the display language Set whether to utilize daylight saving time (+1(h)) or not (None). 1 2 (ĺ P. 7) Settings Description None Daylight saving time is not utilized. +1(h) Daylight saving time is utilized for 1 hour. From the MENU screen, tap ĺ Daylight Saving Time . Cleaning mode ĺ Date/Time (ĺ P. 44) Set whether to utilize daylight saving time.
SETTINGS Other settings ATTENTION: While configuring the settings in "Other Settings", the station will not respond to an incoming call and will not sound ringtone. Registering/Deleting a mobile device 3 Tap Video Quality . 4 Tap + to improve the quality or the quality. 5 Tap • Downloading the App to the mobile device (ĺ P. 17) • Registering a mobile device to the station (ĺ P. 17) • Deleting the mobile device from the station (ĺ P.
SETTINGS Con¿guring the settings for automatically updating the station Viewing station information View a noti¿cation for updating the ¿rmware of the station. If an update is available, continue to update the station. It is also possible to con¿gure the settings to automatically update the station. * To enable the automatic update, the station must be connected to the network. The station and the server will communicate periodically for updating.
SETTINGS Con¿guring network settings • • • • Con¿rming the related regulations Connecting using "Auto Connect (WPS)" (ĺ P. 11) Connecting using "Manual Setup" (ĺ P. 11) Con¿rming the current network settings (ĺ P. 14) Other Wi-Fi settings (ĺ P. 15) 1 This will reset all the settings to default, except for the following. • Recordings stored in a microSDHC card and the built-in memory From the MENU screen, tap ĺ Other Settings . ĺ ĺ > A con¿rmation screen will be shown.
FOR PROPER USE OF THE STATION Updating a firmware of the station The ¿rmware of the station must be updated periodically. The following methods are available for updating. • Automatic update through the network. • Receiving a noti¿cation for available updates through the network. • Updating the station by using a microSDHC card on which the newest version of the ¿rmware is stored. NOTE: For selecting the updating method, see "Configuring the settings for automatically updating the station" (ĺ P.
FOR PROPER USE OF THIS STATION 3 Updating the station by using a microSDHC card on which the newest version of the ¿rmware is stored 9 . The updating begins. When "The ¿rmware has been updated. The station will restart in 5 sec." is shown, the updating has been completed, and the station reboots after 5 seconds. Use this method when the station is not connected to the network. In advance, download the newest version of the ¿rmware from the Aiphone website (www.aiphone.net) to a microSDHC card.
FOR PROPER USE OF THIS STATION Troubleshooting If issues with the station occur, refer to the following information to determine whether the issue can be corrected by the suggested testing and solutions. For further help and assistance, contact your installer or service provider. Problem Cause Solution Page The screen is black. The monitor is oႇ in standby mode. 6 The screen is too dark or too bright, and it is diႈcult to view. The screen brightness may be incorrectly set.
FOR PROPER USE OF THIS STATION Specifications Power supply DC24V (from power supply) Screen 7 inch TFT LCD touch screen Current consumption GT-1C7W : (MAX) Approx. 300mA GT-1C7W-L : (MAX) Approx. 360mA Mounting Wall-mount Material Self-extinguishing resin Hands-free (Auto-voice actuation) Color White Dimensions 155 (H) × 210 (W) × 27 (D) (mm) 6-1/8 (H) × 8-1/4 (W) × 1-1/16 (D) (inches) Mass Approx. 620 g (1.37 lbs.
FOR PROPER USE OF THIS STATION ISED WEEE CAN ICES-3 (B)/NMB-3(B) The object area of This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. is the EU.
FOR PROPER USE OF THIS STATION Warranty Aiphone warrants its products to be free from defects of material and workmanship under normal use and service for a period of 2 years after delivery to the ultimate user and will repair free of charge or replace at no charge, should it become defective upon which examination shall disclose to be defective and under warranty.
