Write Message Choose write to write your message before sending It. 1. Press | 9 or&B ] key to edit, then press [(TD] key to select. 2. Flashing cursor appears, using the keyboard to input messages, press [9] key to nova to the left ona, press [ 2] button to the right one, when editing area have content, press the [Cj ] key to delete any useless character, otherwise when editing area without content to return previous interface. 8. After editing the text, press [ZN] to choose to send or save. 4.
Receive Message ‘When your radio on rec sending name or ID. When receive massage, you can choice the following, * View * Delete Nita: If you press the [PTT] key while tha radio Is displaying the prompt screen, the radio exits the Message prompt screen. 1g message, the screen in left will show message icon for View message 1. Press view, press [(ED] to selection. 2. Open the required message in the receiver box. 3.
Delete Message On the Receiver Box Using menu function, 1. Press [(TCD] to menu mode. . Press message, Press selection. . Press In Box, Press [CD] to select. . Press required message , Press [(TD] to selection. . Re-press [CD] to sub-menu. . Press delete, Press to selection. + Screen return to In Box. Encryption If use this function, It will be good for preventing other user In tha channel eaves drop which utilize software encryption but can not allow .
Radio ID Can be setup 32ND. 1. Press [ (ED] to menu mode. 2. Crass radio ID, press [ (Z] to selection. 3. Press select, press [(Z] to revise ID cods, press [ED] to revise ID name. 4. Press [(CD] to confirm. 5. Edit ID code or ID name, press [9 or to nova left right character, press [Cl] to delete character. Radio 1. Press to menu mods. 2. Press radio, press [(ED] to enter. 3. Press select radio frequency or channel, or input the frequency or channel directly with keypad. 4.
Analog/Digital Mode Switch Long Press [ (EZ ] key to switch Analog/Digital mode under frequency mods. Version ‘Showing Radio Version 1. Press [CT] to many mode. 2. Press radio version, press [(ED] to selection. 3. Screen will appear the current fixed version. Open Password Through program software to set up password, password for 6 significant digits. Initialization If the radio set up open password, it will not operate this function. 1. Press [(ZD] and [ G3)] to open radio, press Initialization selection.
Squelch Level The higher level, the deeper squelch. 1. Press [(ZD] to menu mods. 2. Press whole set up, press [ (T2)] to selection. 3. Crass squelch level, press [TD] to selection. 4. Cross choice press [(ED | to confirm. 5. The function is available in analog channel. Save The greater the proportion of power saving, the more standby power. 1. Press [(ZD] to menu mode. 2. Press Main Set,, press selection. 3. Press battery save, press [(ED] to selection. 4.
4. Press required message, then press selection. Key Define a: Key setting by long & short press function b: Short press [ 2D] to change side key 1, side key 2 for short & long selection. 1. Press [(ZD] to menu mode. 2. Press [3 or €£3] to Man Set, press [ (Z0)] to selection. 3. Cross key define, press selection. 4. Press select, press confirm. Back Light 1. Press to menu mode. 2. Cross Main Set, press selection. 3. Press back light, press selection. 4.
3. Press | @@ or €3)] to channel scan mode Press [(ZD] to selection. 4. Press choice, Press [CD] to confirm. Save Ch : Input the digital directly to choice the channel. : CH before the channel no. Indicate that current channels have data. Press [(Z] to menu mode. Press Main Set, press selection. Press save. CH, press [ to selection. Press choose or Input required channel number by keypad, press [(ED] to confirm. lawnmower TO Delete Ch a: CH before the channel no. indicate that current channels have data.
Two. Channel Setting (Band A Set and Band B Set) NO. | Screen Display Settings Menu Introduction ol Zone All Zone Select 02 Step 2.5KI5KI...25K Frequency Step Setting 03 Power Low/Middle/High Transmit Power 04 Vox OFF/ON VOX Switch 0s Vox Level L2U...8L VOX Levels ow WN Narrow/Wide Wide/Narrow Band Select 07 TOT Time-out Timer og pence CTCSS/DCS 03 R-CDC R-CDC 10 Tc Dc T-CDC 1 Ch.
Transmit Power You can set radio transmit power at HIGH, MIDDLE OR LOW. According to per-programmed HIGH, MIDDLE or LOW power select key, change HIGH, MIDDLE or LOW power, using menu function, 1. Press [(T] to enter the menu. 2. Cross [@9 or £3] key to channel setting, then press [SD] to select. 3. Press [@Y or (E)] key to frequency step setting, then press [ (TD) to select. 4. Press [@9 or EB] key to select, then press [ (ZD] to confirm.
4. Press [3D] to change CSS / DCS frequency, then press select CTCSS/DCS frequency 5. Press to confirm. R-CDC a: Only analog mode can set CTCSS/DCS. b: Only set receiving is available. ©: Press [&D] key to change CSS, DCS positive direction, DCS negative direction, close CTCSS/DCS. 1. Press [(ED] to enter the menu. 2. Press [9 or @€B] to channel setting, then press [TD] to select. 3. Press [3 or £3] key to R-CDC, then press [ (ZI) ] to select. 4.
4. Press [9 or KB] key to select, then press [ ZD] to confirm. 5. This function Is only available under frequency mode. Frequency Difference 1. Press [ (ZD] to enter the menu. 2. Press channel setting, then press select. 3. Cross or 2] key to Frequency Difference, then press select. 4. Press [@9 or EB] key to select, then press confirm. Color Code Only digital mode can set color code, or It Is not allowed to use radio. Only same color code to communicate. Press [ (TD to enter the menu.
4. Press select, then press [ (Z| to confirm. 5. This function can be only edited under digital channel. Cancel Receiving Group Call List a: wheels on, It means communication Is available when receiving any contact. b: When It Is OFF, It means communication Is available only when the contacts that received must be in receiving group list first. . Press [ (E0] to enter the menu. Crass channel setting, then press select. Cross [¥ or 3] key to Cancel Receiving Group Call List, then press [TD] to select. 4.