Specifications

字体：Gilroy Medium �pt
Ailofy灯带说明书
105g无光铜
风琴折
审核
批准
曹佳丽
产品名
CMYK
100*100mm
规格:
物料编码:
UPC:
型号:
2022.03.17
V1.0 首次创建
品牌
• Connect the equipment into an outlet on a circuit different from that to
which receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Warning
Precautions
Connecting To Your Voice Assistant
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment. This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) This device must accept any
interference received, including interference that may cause undesired
operation. This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
This equipment complies with FCC radiation exposure limits set forth for
an uncontrolled environment. This equipment should be installed and
operated with minimum distance of 20 cm between the radiator and
your body.
Service Email: [e-mail]
Service URL: www.ailofy.com
RF RADIATION EXPOSURE STATEMENT
NEED HELP?
Flashing blue & yellow
In pairing mode
Solid blue
Light strip on
Off
Light strip off
Flashing blue
Connecting to cloud or offline
SPECIFICATION Installation
Status Indicator
Connect
Light Strip
Controller
Power Adapter
Ailofy
Indicator Light
Function Button
Switch Button
Use an alcohol wipe to clean the surface of the sticking area.
In the case of not connecting the power supply, the light strip can be cut
to the required length at the cut line mark.
When the light strip needs to be installed at 90°, please fold the light
strip into a loop and fix it with clips.
Download the Ailofy app from your app store and sign up for a new
account.
Do not let the light strips get tangled together to avoid heating the
light strips.
It is forbidden to bend the position of the LED lamp, which may
damage the product.
Keep the device powered off during installation.
If the power cord is damaged, please do not disassemble and repair
it without permission.
The product only be supported to use indoor.
Follow the instructions in the Ailofy app to setup.
Open the Ailofy app and tap the + sign on the top right corner of the
My Home tab. Tap Add Device and then select Ailofy Light Strip Pro.
Tip: Do not bend the light strip directly.
When powered on, the light strip flashes blue, if not, press and hold the
side button for 7 seconds until the controller flashes blue and yellow.
Adapter
InterfaceSnap
Microphone
Controller Installation
Remove the adhesive on the controller and stick it on the clean place.
Tip: Make sure the controller is glued firmly and the button on the side
can be used normally.
Use an alcohol wipe to clean the surface of the sticking area.
Connect the light strip to the controller, then remove the adhesive
backing on the light strip and stick it on the installation surface.
Ailofy
Light Strip Installation
Ailofy Light Strip Pro 5M
Alexa
Open the Ailofy App, enter your Account settings, tap Smart
Integrations.
Tap Alexa to bind your Ailofy account.
When binding successfully, you can control your Ailofy lights via
Alexa.
Google Home
Open the Googe Home App, log in your account.
Tap Set up device.
Tap Works with google.
Search the Ailofy device listing and log in with our Ailofy account.
Wait a few more seconds, and you’re done.
Model: AILSPR
Wireless connection: 802.11b/g/n;
1-14@2.4GHz; WPA/WPA2+20dBm
Adapter input: AC 110V-250V 50Hz/60Hz
Operating temperature: -4℉-122℉(-20℃-50℃)
Length: 16.4ft
Wattage: 24watts
Rated input: DC 12V
Life expectancy: 25,000 hours