User Manual

High Performance and Highly Reliable Solution
for Cooling and Heating Applications
Specification of Thermoelectric Module
Thermonamic Module
Aideepen is able to provide high-value, expert quality solutions for a variety of customer needs.
Email: [e-mail] Web Site: www.aideepen.com
Description
TEC1-12706
The 127 couples, 40 mm × 40 mm size single stage module is made of selected high performance ingot to achieve super ior
cooling performance and greater delta T up to 70 °C, designed for superior cooling and heating up to 100 Cº requirement. If
higher operation or processing temperature is required, please specify, we can design and manufacture the custom made module
according to your special requirements.
Features Application
● High effective cooling and efficiency. ● Food and beverage service refrigerator
● No moving parts, no noise, and solid-state ● Portable cooler box for cars
● Compact structure, small in size, light in weight ● Liquid cooling
● Environmental friendly, RoHS compliant ● Temperature stabilizer
● Precise temperature control ● Photonic and medicalsystems
● Exceptionally reliable in quality, highperformance
Peformance Specification Sheet
Th(ºC)
27
50
Hot side temperature at environment: dry air, N
2
DT
max
(ºC )
70
79
Temperature Difference between cold and hot side of the module
when cooling capacity is zero at cold side
U
max
( Voltage)
16.0
17.2
Voltage applied to the module at DT
max
I
max(
amps)
6.1
6.1
DC current through the modules at DT
max
Q
Cmax
(Watts)
61.4
66.7
Cooling capacity at cold side of the module under DT=0 ºC
AC resistance(ohms)
2.0
2.2
The module resistance is tested under AC
Tolerance (%)
± 10
For thermal and electricity parameters
Geometric Characteristics Dimensions in millimeters
Ordering Option
Sealing Option
A. S older: C. Ceramics:
1. T100: BiSn (Tmelt = 138 °C) 1. Alumina (Al
2
O
3
, white 96%)
B. Sealant: 2. Aluminum Nitride (AlN)
1. NS: No sealing (Standard) D. Ceramics S urface Options:
2. SS: Silicone sealant 1. Blank ceramics (not metallized)
3. EPS: Epoxy sealant 2. M etallized (Au plating)
4. Customer specify sealing
other than above
Naming for the Module
Suffix
Thickness
(mm)
Flatness/
Parallelism (mm)
Lead wire length(mm)
Standard/Optional length
TF
0:3.8±0.1
0:0.035/0.035
125±3/Specify
TF
1:3.8±0.05
1:0.025/0.025
125±3/Specify
TF
2:3.8±0.025
2:0.015/0.015
125±3/Specify
Eg. TF01: Thickness 3.8 ± 0.1 (mm) and Flatness 0.025 / 0.025 (mm)