Data Sheet

ManualsBrandsAi-Think ManualsElectronicsESP-15F

Table Of Contents

ESP-15FDatasheetV1.0

第 1 页共13

页

ESP-15FDatasheet

VersionV1.0

Summary of content (14 pages)

PAGE 2
ESP-15F Datasheet V1.0 Disclaimer and copyright notice The information in this article, including the URL address for reference, is subject to change without prior notice.The Documentation is provided "as is" without any warranty, including any warranties of merchantability, fitness for a particular purpose, or non-infringement, and any warranties mentioned in the proposal, specification or sample.
PAGE 3
ESP-15F Datasheet V1.0 Change History of Revision Version Date V0.9 2016.10.25 Initial release V1.0 2019.11.15 Data update C o p yrig h t © 2019 Contents of Revision Change Sh en zh en A i-Th in ker Tech n o lo g y C o .
PAGE 4
ESP-15F Datasheet V1.0 Contents 1、 2、 3、 4、 5、 6、 7、 8、 9、 Product Overview.......................................................................................................................................5 Electrical Parameters ................................................................................................................................8 Appearance size...................................................................................................................................
PAGE 5
ESP-15F Datasheet V1.0 1、 Product overview The ESP-15F WiFi module was developed by Ai-Thinker Technology. The core processor of the module ESP8266 integrates the industry-leading Tensilica L106 ultra-low-power 32-bit micro MCU in a smaller package with 16-bit reduced mode. The main frequency supports 80 MHz and 160 MHz, supports RTOS, and integrates Wi-Fi MAC / BB / RF / PA / LNA. The ESP-15F WiFi module supports the standard IEEE802.11 b/g/n protocol, a complete TCP/IP protocol stack.
PAGE 6
ESP-15F Datasheet V1.0 Features n Complete 802.
PAGE 7
ESP-15F Datasheet V1.0 Parameters Figure 1 Main Parameter Model ESP-15F Package DIP-8 Size 41.3*24.1*6.6(±0.
PAGE 8
ESP-15F Datasheet V1.0 2、 Electrical parameter Electrical Characteristics Parameter Symbol Storage temperature I/O Min Typ Max Unit VDD 4.75 5.0 5.25 V VIL/VIH - -0.3/0.75VIO - 0.25VIO/3.6 V VOL/VOH - N/0.8VIO - 0.1VIO/N V IMAX - - - 12 mA Power Consumption The following power consumption data were obtained from the tests with a 3.3V power supply and a voltage stabilizer, in 25°C ambient temperature.
PAGE 9
ESP-15F Datasheet V1.0 Note： n Modem-sleep is used when such applications as PWM or I2S require the CPU to be working. In cases where Wi-Fi connectivity is maintained and data transmission is not required, the Wi-Fi Modem circuit can be shut down to save power, according to 802.11 standards(such as U-APSD). For example, in DTIM3, when ESP8266EX sleeps for 300ms and wakes up for 3ms to receive Beacon packages from AP, the overall average current consumption is about 20mA.
PAGE 11
ESP-15F Datasheet V1.0 4、 Pin definition ESP-15F has 16 interfaces，As the pin diagram, the pin function definition table is the interface definition. . ESP-15F Pin diagram Table Pin function definition No. Name 1 RST Reset, 2 ADC A/D conversion，Input voltage range0~1V，the value range is 0~1024. 3 EN 4 IO16 Connect wit RST pin to wake up Deep Sleep 5 IO14 HSPI_CLK/IR_T/I2C_CLK/I2SI_WS 6 IO12 HSPI_MISO 7 IO13 HSPI_MOSI/UART0_CTS 8 VCC 3.
PAGE 12
ESP-15F Datasheet V1.0 15 RX RX receive 16 TX TX transmit Table Description of the ESP series module boot mode Mode CH_PD(EN) RST GPIO15 GPIO0 GPIO2 TXD0 Download mode High High Low Low High High Running mode High High Low High High High Note：Some of the pins inside the module had been pulled up or pulled down，Please refer to the schematic diagram. 5、 Schematics Co p yrig h t © 2019 Sh enzh en A i-Th in ker Tech n o lo g y C o .
PAGE 13
ESP-15F Datasheet V1.0 OEM/Integrators Installation Manual Important Notice to OEM integrators 1. This module is limited to OEM installation ONLY. 2. This module is limited to installation in mobile or fixed applications, according to Part 2.1091(b). 3. The separate approval is required for all other operating configurations, including portable configurations with respect to Part 2.1093 and different antenna configurations. 4. For FCC Part 15.
PAGE 14
FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.