Users Manual Part 2

ManualsBrandsAI.MON ManualsElectronicsSMART MONITORING BAND

① Power on (charging required)

· Please fully charge the battery before first use. If the battery has remaining charge,

the red LED is ON while charging it after coupling it with the charging cradle.

(If the remaining charge of the battery is very low, in 10 to 20 minutes after coupling

with the charging cradle, the red LED lights up and charges.)

· Disconnect it from the charger when charging is complete

② How to solve when the Band is not working

· Press reset button for 8 seconds. After 1~2 seconds, press reset button

once more for a second. Then green light will flash twice, and the

band will restart with set values.

③ Band operation and charging indication

· How to turn on : It automatically turns on when combined with the

charging cradle which is connected to the power.

· How to check Power-On: If you shake the band lightly , green LED will flash briefly.

· Reset : Use reset button only when band is not working.(Refer to ② How to solve when

the Band is not working)

!Do Not press the reset button too often with a pointed object. It may cause damage.

· LED displaying while charging : Red LED light on

· LED displaying when charging completed : Green LED light on

3.2 Information Required for Band Use

07 08

· reset button

· green LED light

red LED light ·

How to use

④ Alarm Sound Guide

Summary of content (4 pages)

PAGE 1
03 How to use How to use 3.2 Information Required for Band Use ④ Alarm Sound Guide Categories App GW gateway band battery band battery 03 Operating Criteria Sound Type Frequency Pitch Notes Battery remaining: Single sound (Ding-dong) Gateway alarm less than 20% Once Low pitch through the App Battery remaining: Single sound (Ding-dong) less than 20% Gateway Once Low pitch alarm ① Power on (charging required) · Please fully charge the battery before first use.
PAGE 2
03 How to use How to use 3.3 Acc band Components and How to Wear 03 · Combination for 3 to 36 Months(acc band Large) ① Step 1.
PAGE 3
03 How to use How to use ③ Step 3. Make sure it is attached properly ② Step 2. Wear Acc Band How to wear Acc band S(or L)-T1 ①-1 [wearing on the outside of the ankle] Proper Wearing (O) ①-2 1cm~ 1.5cm Wrong wearing(X) ● ● ● Less than 1cm 1cm above · Place acc band 1cm above the baby’s outside ankle bone, in the center. (1-1 front side) · Wrap the ankle with the wings of the acc band T1 to form X shape and secure it with velcro.
PAGE 4
04 Information required to use the App App Display and Monitoring Display 05 ※Installation conditions 4.2 Paired App (phone) and Shared App (phone) [product compatibility] AI.MON smart band product can be connected to a smartphone that meets the specifications below. ① The phone that connects to the gateway is the paired App (phone). · Paired App (phone) is a phone that communicates directly with the gateway. · It initially connects to the gateway and becomes a paired App(phone).