User’s Manual Smart Pass (AIoT Face Recognition & Temperature Measurement for Access Control System ) • • • Before using the product, please read this manual carefully and keep it for later. Image drawings and notations in this document may slightly differ from the actual product. The contents of this document are subject to change without notice. Model : ASP-2000 Stand Assembly Manual English www.ahatouch.com Rev.3.3 Copyright ©2020 AHA INC CO.,LTD.
1. Product Approvals FCC Rule 15.21 The user’s manual or instruction manual for an international or unintentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FEDERAL COMMUNICATIONS COMMISSION This device complies with Part 15 of the FCC Rules.
2. Smart Pass Overview 2.1 Smart Pass Introduction Smart Pass is an advanced AI (Artificial Intelligence) face recognition and heat Check access control system that accurately identifies a person and measures temperature even if the mask covers part of the face or wears glasses and a mask at the same time with advanced deep learning technology. 3. How to use Smart Pass 3.1 How to run Smart Pass 1) When the power is connected, the device turns on.
3.2 How to use Smart Pass The camera recognizes a person by standing in front of the camera in line with the line displayed on the screen. As soon as a person is recognized, the temperature is measured and displayed on the screen. If your temperature is normal, you will be informed by voice. If the temperature is high, a Warning tone is displayed and the entry is prohibited. The mask detection function allows you to display the access only when you are wearing a mask.
4. Smart Pass screen description 4.1 Initial screen This is a screen for face recognition and temperature measurement. The current date & time are displayed at the top. When a person is detected, contextual phrases or temperature measurement results are displayed. Depending on the setting, information such as IP, company name, and version may be displayed at the bottom of the screen. 4.
1 2 3 4 5 6 7 No. Name Description 1 Status information The set device name, IP, user name, and login status are displayed. 2 Log In Management Used to connect the device to a network (not currently supported) 3 Application settings Open the Smart Pass detailed settings menu. 4 Face registration Capture a person's face and register it in the database. 5 Application information Check various information of the device.
4.3 Setting This is a detailed menu for setting up a Smart Pass. (1) Name setting Set the device name and company name.
(2) Inspection setting This is a detailed setting menu related to face recognition and temperature measurement. No. Name Description 1 Temperature test Turns the temperature test function on or off. 2 Temperature compensation It is used to calibrate the temperature when measured different from the actual temperature by the external temperature. In case of manual setting, detailed input field appears. Input value is between 0 ~ 1 ℃.
(3) Detailed recognition setting When checking whether it is a stranger or registered in the database, the accuracy and the number of identifications are set. 1 2 3 No. Name Description 1 Test threshold Determines the precision of comparison with photos in the database. The lower the number, the more precise the comparison. Input value is 10 ~ 20. 2 Comparison count Compare and check the number of times entered. The bigger the number of comparisons, the more accurately a person can be judged.
(4) Volume setting Adjust the volume level for voice guidance and warning sounds. (5) Startup setting Change the behavior or program settings when the device is turned on. 1 2 3 No. Name Description 1 Auto start Set whether the app turns on automatically when the device is turned on. 2 Application daemon When the setting is on, the app will automatically appear on the screen after 30 seconds even if the app is not on the screen.
(6) Application information settings Set whether to display information such as MAC address, IP, and company name on the initial screen.
(7) Recognition effect display Set the change of screen or light when a person is recognized. No. Name 1 Recognition success 2 Recognition failure 3 Photo flood lamp Description When a person registered in the database is recognized, a picture of the person is displayed, or the name of the person is displayed. Choose whether to turn the light to red when the person not registered in the database is recognized or the mask is not worn.
(8) Password setting This menu is for changing the password. ※ The default password value is '123456'. (9) Camera resolution setting Change the camera captured screen resolution. There are 640 * 480 resolution and 1280 * 720 resolution.
(10) Screen protection brightness setting Set the screen brightness when the screen is switched to the screen protection state because no person is detected for a certain period of time. (11) Restart time setting Enter the hour in the upper column and the minute in the lower column on a 24-hour basis. Reboot or shut down the device at the specified time.
(12) Relay setting Set relay mode and delay time Relay is a kind of switch and operates according to the mode setting as follows. Relay mode is used to operate the external door lock, warning light, alarm buzzer, etc. according to the recognition result. Maximum driving current and voltage: 2A 30VDC, 0.28A 220VAC Excessive use of the maximum drive current and voltage may cause product defects. No.
(13) Others You can configure firmware upgrade or server communication related settings. No. Name Description 1 Temperature module firmware upgrade You can manually upgrade the firmware by connecting the USB containing the firmware upgrade file. The file name should be “updateTemp.bin” and it should be at the top of the USB path. 2 Callback setting If you select On, a field for entering content appears. Enter if callback setting is required.
(14) Program initialization This function returns the program settings to the initial state. When the button is pressed, the above warning appears, and when the OK button is pressed, various settings are initialized and all information and records registered in the database are lost. ※ Once the program initialization function is activated, it cannot be reversed. ※ Back up data before initialization.
4.4 Registration of access information This is a function to take a person and register it in the face database. Press the Gather button at the top to take a picture. The picture which was taken is scaled to fit the person's face. Enter ID and name, select gender and click Save to save it to the Face database.
4.5 Device information Displays information about apps and devices. Information such as firmware version, memory, brightness, and volume is displayed.
4.6 Access record You can see who measured your temperature with Smart Pass. This record contains name, identity , checking time, temperature and photo at the time of measurement. If the detected person is not in the face database, it is displayed as 'Stranger'. Enter the time zone you want to see and press the 'query' button to retrieve only the records for that time. If you connect a USB storage device and press the 'Export' button, you can save the records currently in the list separately.
If the storage capacity of the device is full, use "Settings"-> "Program Reset" to delete the old records. At the time of initialization, the record of the registrant list is also erased, and the settings are initialized, so please back up and record the contents. If the storage capacity is full due to the access record and remains below 1GB, Records of 10 days are deleted automatically in sequential order. 4.7 List of registrants You can check the list of people registered in the database.
5. Countermeasure 1) If the device discontinued and slows down, reboot the device. To reboot, drag the left mouse button at the bottom of the screen and drag it up to bring up the bottom menu. Press the power button on the right side of the bottom menu and select Restart to reboot. 2) If you want to change the language Left-click and drag up from the bottom of the screen with the mouse to bring up the bottom menu. Tap the circled button in the middle to go to the Android home screen and open Settings.
Go to Language preferences by selecting 'Language' from the Language & input menu. Drag the icon on the right in Language preferences to change the order to change the device's system language. Changing the system language also changes the language of the Smart Pass. When changing the system language, it is recommended to reboot the device for better usage.
3) How to use Wi-Fi mode Left-click on the bottom of the screen and drag upwards with the mouse to display the bottom menu. Tap the circled button in the middle to go to the Android home screen and open Setting menu. In the setting menu, go to WiFi settings. After that, activate Wi-Fi and select the network you want to use.
6. Product specification Camera Screen Processor Interface Function Resolution Type Aperture Focusing distance White balance Photo flood light Size Resolution Storage Audio USB Serial communication Relay 2 million pixels Dual wide dynamic camera F2.4 50-150cm Auto LED and IR dual photo flood light 8 inch IPS LCD screen 800×1280 RK3288 quad-core (optional RK3399 6-core, MSM8953 8-core) EMMC 8G 2.5W / 4R speakers USB OTG, 1 USB HOST standard A Type x 1 RS232 serial port x 1 1 point contact (2A 30VDC, 0.
7.
8.
9.
10.
11. Maintenance & Precautions 1. Please use this product indoors. 2. Avoid areas around devices that generate heat or humidity, such as air conditioners, heaters, and humidifiers. Please refrain from installing in a place where direct sunlight enters. 3. Do not install the screen of this product in a location facing a window crow, air conditioner, or heater. (Since this product measures infrared rays and heat, it may affect accuracy.) 4.
Installation manual (Main Unit + Stand) Face recognition, fever check for access control system • The image and notation of this document may be different from this product. • The content of this article is subject to change without notice. Model name : ASP-2000 Desk stand Floor stand Wall bracket ENGLISH Copyright ©2020 AHA INC CO.,LTD.
4 Assembly of stand body and pedestal Enables USB (X2) and LAN , DC Jack to be connected to the body and the support DC JACK LAN USBx2 DC JACK LAN USBx2 31
How to assemble the main unit and the table stand 1 Table stand The table stand has a cover, non-slip foots (Foot x 3ea), and screws (M3 x 3ea) on the bottom surface. 2 Disassemble the table stand Separate the foots and screws from the bottom of the table stand to dissemble the cover and table stand.
5 The product dimension Gate Installation Wall Installation Product weight/ dimension Weight (kg) Dimension (mm) ASP-2000 1.4 132.9(W) x 296.2(H) x 25(D) Desk stand 3.5 321(W) x 413(H) x 288(D) Floor stand 8 300(W) x 1552.2(H) x 300(D) Wall bracket 1.4 132.9(W) x 296.
Model ASP-2000 Desk stand Floor stand Wall bracket 34
Tel: +82-31-997-0909 e-mail: overseas@ahatouch.com www. ahatouch.com All specifications are subject to change without prior notice to improve the product.
