INSTALLATION GUIDE AGSHome Smart Garage AGS001
WARNING TO PREVENT SERIOUS INJURY FROM YOUR MOVING GARAGE DOOR OR GATES: Ø DO NOT let children use AGSHome Smart Garage Door Opener product and app without adult supervision. Ø ONLY operate your AGSHome Smart Garage Door Opener device when you are in clear view of your garage or gate, and you have verified that there are no objects are obstructing the operation of the door. Ø ALWAYS wait for garage door or gate to be completely closed.
COMPATIBILITY CHECK Verify the AGSHome Smart Garage Door Controller works with your garage door 1. Look for your garage door on the included “Garage Door Compatibility Guide”. Ø Garage door openers with yellow / purple learn buttons will likely NOT work. 2. Manually ensure your garage door opener is compatible with the Smart Garage Door Controller. Ø Follow the wires from the wall mounted garage controller to your garage door opener.
INSTALLATION 1. Check your Wi-Fi Ø Check the Wi-Fi signal in the garage, where the Smart Garage Controller will be mounted 4 to 5 feet away from the garage door opener. 2. Power up your device Ø Find a convenient location and power the Smart Garage Controller by plugging it in. The blue LED will start blinking. 3. Download the APP Ø Install “Tuya Smart” or “Smart Life” app on your mobile phone from Apple app store or Google Play store.
INSTALLATION 4. Add device in the APP Ø Launch the app and select the Plus ( ╋ ) in the top right corner to add a device. Ø Select Eletrician, then select Smart Garage Door Opener. Ø Tap Confirm indicator rapidly blink. Ø Connect to your Wi-Fi network, enter password, then select Confirm. Ø Once you select Confirm after entering the password, the app will start to pair the Smart Garage Door Opener to your app.
INSTALLATION Installation Overview
INSTALLATION 5. STEP 1 : Connect Controller to Opener Ø Locate the 2 exposed wires coming out of the Controller. Ø Insert the 2 exposed wires into the terminals on the back of your Garage Door Opener. 6. STEP 2 : Install the sensor Ø The sensor has 2 parts. Both sensor parts must be mounted parallel to each other, and they must be 3 – 15 mm apart, not touching. Ø Mount the sensor with wire on the garage frame wall, and mount the sensor without wire on the top of garage door.