Agrident GmbH, Steinklippenstr.
AIR200 Installation © Copyright 2006 by Agrident GmbH All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without prior written permission of Agrident GmbH. Agrident reserves the right to make changes to any and all parts of this documentation without obligation to notify any person or entity of such changes. July 2006 BB/JK Agrident GmbH Steinklippenstr.
AIR200 Installation Contents 1. Introduction.......................................................................................................... 4 2. Specification ........................................................................................................ 4 3. Installation ........................................................................................................... 4 3.1 Installation of the AIR200 reader ...............................................................
AIR200 Installation 1. Introduction The ISO reader module AIR200 is designed as an integrated reader head for the handheld computer Workabout PRO M/C by PSION TEKLOGIX. It combines the reading of ISO transponders with the Windows CE software of the PSION®-workabout PRO. Together with the external antenna AEA080 from Agrident, the reading of bolus or ear tags is much more convenient. The AIR200 is compatible to ISO 11784/5. It reads HDX and FDX-B transponders also as H4002 compatible transponders.
AIR200 Installation 3. Pull out the 4 screws on top 4. 5. Push the SW1401 switch in position OFF. 6. Remove the cover from the battery room by unlocking the screws. 7. Remove the battery. 8. Put in the adapter board as shown above. 10.07.06 and the 6 screws on the back.
AIR200 Installation 9. 10. Fix the adapter board with the 4 added screws. Push the SW1401 switch in position ON, again. 11. 12. Now stick the AIR 200 reader to the Workabout and fix it with the 2 added washers and PRO, as shown screws. 13. Fix the 4 screws on top. 10.07.06 14. Mount the back plate with the 6 screws.
AIR200 Installation 15. Put in the battery and close the battery room 16. by bolting the cover with the screws. 17. Push the pen back in its holder. 18. Keep the Workabout's head cover, in case that you might need it. Please follow the instructions of the protocol, before you start a read. 10.07.
AIR200 3.2 Installation Installation of the AEA080 antenna 1. The stick antenna AEA080 can easily be fixed to the reader by a so called Binder plug. 2. Screw the silver cap off from the socket. 3. Put the Binder plug of the stick antenna in the socket of the AIR200 reader. 4. Pay attention to the groove. 5. Follow the instructions of your Workabout PRO, to start a read. 10.07.
AIR200 Installation 4. Safety and care The manufacturer accepts no liability for damage resulting from improper use or use not consistent with that described in these operating instructions. • The AIR accessories contain no parts that can be repaired by the user. For this reason it may only be repaired by authorised customer service personnel. • In both operation and storage of the antenna please secure to comply with the environment conditions specified in the technical data.
AIR200 Installation 6. FCC digital device limitations Radio and Television Interference This equipment has been tested and found to comply with the limits for a digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
AIR200 Installation To obtain a copy, contact Agrident BV and request the “Declaration of Conformity” document for Multi-technology readers. Agrident BV mail@agrident.com In case of alteration of the product, not agreed to by us, this declaration will lose its validity. This symbol indicates proof of conformity to applicable European Economic Community Council directives and harmonized standards published in the official journal of the European Communities. 10.07.
