™ owners manual MANUEL D’UTILISATEUR MANUAL DEL USUARIO Model No. Modèle N° Modelo No. 45-04731 Smartlink Platform PLATE-FORME SMARTLINK PLATAFORMA SMARTLINK • • • • • CAUTION: Read Rules for Safe Operation and Instructions Carefully Safety Assembly Operating Maintenance Repair Parts • • • • • Sécurité Assemblage Utilisation Entretien Pièces de réparation • • • • • Seguridad Armado Operación Mantenimiento Piezas de repuesto Call 1-800-448-9282 for missing parts or assembly help.
SAFETY RULES Remember, any power equipment can cause injury if operated improperly or if the user does not understand how to operate the equipment. Exercise caution at all times when using power equipment. CAUTION: VEHICLE BRAKING AND STABILITY MAY BE AFFECTED WITH THE ADDITION OF AN ACCESSORY OR AN ATTACHMENT. BE AWARE OF CHANGING CONDITIONS ON SLOPES. LOOK FOR THIS SYMBOL TO POINT OUT IMPORTANT SAFETY PRECAUTIONS. IT MEANS — ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED.
12 (x2) 7 (x2) 8 (x2) 10 (x4) 11 (x3) 15 (x2) 48115 13 (x2) 44044 43063 16 (x2) 43085 43019 14 (x13) 44292 47810 18 (x1) 9 (x4) 43343 47134 43182 45100 23353 HARDWARE PACKAGE SAC DE PIÈCES PAQUETE DE TORNILLERÍA 3 17 (x1)
ASSEMBLY INSTRUCTIONS 7. Secure the ends of the hitch tubes together using two 5/16 x 2-1/2" hex bolts (8) and 5/16" nylock nuts (14). Do not tighten yet. See figure 3. Tools Required for Assembly (2) 3/4" Wrenches (2) 1/2" Wrenches 8 8 assembly of Smartlink Platform 1. Rotate the end plates attached to the tray assembly down to a vertical position as shown in figure 1. 2. Remove the bolt and nylock nut from the front right corner of the tray assembly. See figure 1. 3.
10. Attach the lift tube assembly (2) and the hitch tube (5) to the rear hole on the left side of the tray using a 5/16 x 1-1/2" hex bolt (10) and 5/16" nylock nut (14). Tighten the nut then loosen 1/2 turn. 11. Tighten the nuts and bolts shown in figures 2 and 3. 13. Attach the wheels (1) to the lift tube assembly using a 1/2 x 4" hex bolt (7), a 1/2" jam nut (13) placed between the wheel and the lift tube assembly and 1/2" a nylock jam nut (12) for each wheel. See figure 7. 14.
know your Smartlink Platform FOOT STANDS LIFT HANDLE CATCH CENTER BRACE LIFT HANDLE HITCH TUBES RETAINER SLOT AXLE RETAINERS Hitch Tubes Axle Retainers Connects the Smartlink Platform to the towing vehicle. Center Brace Reinforces tools that need further support. Lift Handle Raises and lowers attached tools. Lift Handle Catch Keeps Lift Handle in transport position. Retainer Slot Foot Stands 6 Lock tool in place with help from clevis pins. Hold shoulder bolts of some tools.
using the Smartlink Platform Attaching Tools - loading tools Attaching Tools - Center Brace Different tools should be attached in the ways outlined below to lower risk of injury. Always exercise caution when loading a tool into the platform. Depending on which tool is used, the center brace may need to be moved to either the center or top of the Smartlink Platform. Spiker/plugger 1. Slide the bushings on each end of the tool into the axle retainers one end at a time.
Operation dethatcher 1. With the platform standing on footstands, slide the shoulder bolts on the dethatcher down into the retainer slots. See figure 13. 2. Rotate the dethatcher until the bushings go into the axle retainers. See figure 13. 3. Proceed to LOCKING TOOLS section below. Operation of the Smartlink Platform will change depending on what tool has been attached. Refer to the operation section for each tool before using it. never leave an unattached tool laying unattended.
maintenance plug aerator • • • • • • • • • • • Mow lawn and remove loose clippings prior to use. Start tractor engine with controls in neutral and place throttle at slow engine speed. Engage shift lever at lowest possible forward speed and lower aerator, allowing plugger points to enter the ground. Increase speed as conditions permit. Aerate in the straightest line possible, making overlapping passes to increase the plugger point pattern.
CONSIGNES DE SÉCURITÉ Tout appareil mécanique risque de provoquer des blessures s’il est employé incorrectement ou si l’utilisateur ne sait pas s’en servir. Faites preuve de prudence à tout moment lorsque vous utilisez un appareil mécanique. ATTENTION : LE FREINAGE ET LA STABILITÉ DU VÉHICULE RISQUENT D’ÊTRE AFFECTÉS EN RACCORDANT UN ACCESSOIRE. TENEZ COMPTE DES CONDITIONS CHANGEANTES SUR LES PENTES. CE SYMBOLE INDIQUE DES CONSIGNES DE SÉCURITÉ IMPORTANTES.
INSTRUCTIONS POUR L’ASSEMBLAGE NÉCESSAIRES À L’ASSEMBLAGE Clés de 3/4 po (2) Clés de 1/2 po (2) ASSEMBLAGE DE LA PLATE-FORME SMARTLINK 11. Resserrez les écrous et les boulons comme indiqué dans les figures 2 et 3. 12. Fixez les tubes d’attelage de la partie inférieure à l’assemblage des tubes d’attelage (19), en utilisant deux boulons à six pans de 5/16 x 1-1/2 po (10) et des écrous à frein élastique de 5/16 po. (14) Voir la figure 6. Resserrez. 13.
CE QU’IL FAUT SAVOIR SUR VOTRE PLATE-FORME SMARTLINK BÉQUILLES CLIQUET DE LA POIGNÉE DE LEVAGE APPUI CENTRAL TUBES D’ATTELAGE POIGNÉE DE LEVAGE CRAN DE RÉGLAGE DE LA PLAQUE DE FIXATION DE L’ESSIEU PLAQUES DE FIXATION DE L’ESSIEU Tubes d’attelage Appui central Poignée de levage Cliquet de la poignée de levage Permet de raccorder la plateforme Smartlink au véhicule remorqueur. Renforce les outils qui en ont besoin. Lève et abaisse les outils. Garde la poignée de levage en position de transport.
FONCTIONNEMENT UTILISATION DE LA PLATE-FORME SMARTLINK Le fonctionnement de la plate-forme Smartlink change selon l’outil qui y a été attaché. Consultez la section Fonctionnement pour chaque outil avant de vous en servir. FIXATION DES OUTILS – APPUI CENTRAL Selon l’outil qui est utilisé, il vous faudra déplacer l’appui central au centre ou en haut de la plate-forme Smartlink. 1. 2. NE JAMAIS LAISSER UN OUTIL NON ATTACHÉ SANS SURVEILLANCE.
ENTRETIEN AÉRATEUR À CUILLÈRE • • • • • • • • • • • Tondez le gazon et enlevez l’herbe coupée avant utilisation. Démarrez le moteur du tractor avec les commandes au point mort, puis ouvrez la commande des gaz à un régime lent. Engagez le levier sélecteur à la vitesse de marche avant la plus basse, et abaissez l’aérateur, permettant ainsi aux pointes de pénétrer le sol. Augmentez la vitesse au gré des conditions.
REGLAS DE SEGURIDAD Cualquier equipo puede causar lesiones si se opera inapropiadamente o si el usuario no entiende cómo operarlo. Tenga la debida precaución en todo momento cuando use este equipo eléctrico. PRECAUCIÓN: LA CAPACIDAD DE UN VEHÍCULO PARA FRENAR Y SU ESTABILIDAD PUEDEN QUEDAR AFECTADOS AL ADICIONAR UN ACCESORIO O ACOPLE. TENGA CUIDADO CUANDO LAS CONDICIONES CAMBIAN EN UN TERRENO INCLINADO. BUSQUE ESTE SÍMBOLO QUE INDICA PRECAUCIONES DE SEGURIDAD IMPORTANTES.
INSTRUCCIONES DE ENSAMBLAJE HERRAMIENTAS REQUERIDAS PARA EL ENSAMBLAJE (2) Llaves de 3-4 pulg. (2) Llaves de 1/2 pulg. ENSAMBLAJE DE LA PLATAFORMA SMARTLINK 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. Instale el ensamblaje del tubo de elevación (2) en el agujero posterior del lado izquierdo de la bandeja utilizando un perno hexagonal de 5/16 x 1-1/2 pulg. (10) y una tuerca de cierre de nylon (14). Apriete la tuerca y luego aflójela 1/2 vuelta. 11. Apriete las tuercas y pernos que aparecen en las figuras 2 y 3. 12.
CONOZCA LA PLATAFORMA SMARTLINK PARADOR DE PIE SUJETADOR DEL ASA LEVANTADORA RIOSTRA DEL MEDIO TUBOS DE ENGANCHE ASA LEVANTADORA RANURA DEL RETÉN RETENES DEL EJE Tubos de enganche Conectan la plataforma Smartlink al vehículo de remolqu. Riostra de medio Refuerza las herramientas que necesitan refuerzo adicional. Asa levantadora Eleva y desciende las herramientas conectadas. Sujetador de asa Mantiene el asa levantadora en la posición levantadora de transporte.
OPERACIÓN CÓMO UTILIZAR LA PLATAFORMA SMARTLINK La operación de la plataforma Smartlink cambiará dependiendo de qué herramientas se hayan acoplado. Consulte la sección de operación correspondiente a cada herramienta antes de usarla. HERRAMIENTAS DE ACOPLAMIENTO – RIOSTRA DE MEDIO Dependiendo de la herramienta que se use, la riostra de medio puede que necesite moverse ya sea al centro o a la parte superior de la plataforma Smartlink. 1. 2. NUNCA DEJE UNA HERRAMIENTA NO ACOPLADA DESATENDIDA.
MANTENIMIENTO AIREADOR DE TACOS • • • • • • • • • • • Corte el césped y retire las ramas sueltas antes de usar el aireador. Arranque el motor del tractor con los controles en neutro y coloque el acelerador para que el motor funcione a baja velocidad. Enganche la palanca de cambios a la menor velocidad de avance posible y descienda el aireador, hasta que las puntas del aireador de tacos penetren en la tierra. Aumente la velocidad según las condiciones lo permitan.
repair parts for 45-04731 Smartlink Platform 10 24 21 27 9 28 14 9 30 30 14 14 15 23 22 25 9 20 14 14 26 16 14 9 1 10 20 7 14 14 25 6 24 10 13 14 27 30 14 16 12 9 28 11 9 21 30 2 23 4 15 14 29 11 10 8 14 10 14 8 3 5 19 1 18 13 11 5 12 7 14 14 17 22
repair parts for 45-04731 Smartlink Platform ref 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 qty 2 1 1 1 2 1 2 2 8 6 3 2 2 19 2 2 part no 46503 67204 26360 26345 41211 26288 45100 44292 43182 43085 43063 48115 43019 47810 44044 47134 description Wheel (gray color) Lift Tube Assembly Transport Handle Bar Center Brace Hitch Tube Lift Handle Catch Hex Bolt, 1/2-13 x 4" Hex Bolt, 5/16-18 x 2-1/2" Hex Bolt, 5/16-18 x 3/4" Hex Bolt, 5/16-18 x 1-1/2" Hex Bolt, 5/16-18 x 1" Nylock Jam Nut, 1/2-13 Jam Nut, 1/2-13 Nylo
the fastest way to purchase parts www.speedepart.com REPAIR PARTS Agri-Fab, Inc. 809 South Hamilton Sullivan, IL. 61951 217-728-8388 www.agri-fab.com This document (or manual) is protected under the U.S. Copyright Laws and the copyright laws of foreign countries, pursuant to the Universal Copyright Convention and the Berne convention.